For quick load leveling and stabilizing; ideal for cargo trailers, industrial implements and equipment outriggers. This drop-leg jack features high-strength structural steel tubing and corrosion-resistant zinc plating.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Fulton drop leg stabilizer jack with mounting channel. This drop leg jack is great for quick load leveling and stabilizing. The outer tube, right here, actually gets welded to your trailer. Once you have that on there and you're ready to set up, all you have to do is pull the pin out, and that's going to allow you to drop the leg, or adjust to whatever setting you need. You'll notice it has multiple adjustment holes. The bottom hole is for the fully retracted position, stowed position, or travel position. Now, the drop leg, itself, has a zinc plating.
That's going to offer great corrosion resistance. This piece right here is just nice steel construction ready to be welded onto the trailer. Steel construction of the overall unit makes it strong and durable. It's going to have a capacity of 3,000 pounds. The kit's going to come with your outer tube, your drop leg, and the adjustment pin.
Now, the drop leg link from the bottom of the footplate to the top of the tube is around 20". The outer tube measures about 13" long and has a 2" x 2" square design. The drop leg is a square design as well. That's going to measure 1 3/4" x 1 3/4". Now, the footplate is welded onto the drop leg tube. That footplate is a nice large design.
That's going to do a great job at spreading out the applied weight, especially on softer surfaces to help prevent sinking. It's going to give us length measurement of about 7 1/2". Width measurement on that's going to be around 3 7/8". I do want to go over the distances between the adjustment holes real quick. The distance we have from the center of this adjustment hole, which is the lowest, to the center of the highest is 10". Then the holes are separated on center by 2".
That's going to be your incremental height adjustment. The distance between this hole and the very bottom hole, the fully retracted hole, is 4 1/2" on center. From the center of the lowest adjustment hole to the bottom of the footplate is 6 1/4. From the center of the highest adjustment hole to the bottom of the footplate is 16 1/4". And then from the fully retracted hole, on center to the bottom of the footplate, is about 1 3/4". That's going to do it for today's look at Fulton drop let stabilizer jack with the included welded on mounting channel.
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
For quick load leveling and stabilizing; ideal for cargo trailers, industrial implements and equipment outriggers. This drop-leg jack features high-strength structural steel tubing and corrosion-resistant zinc plating.Product is as advertised. I've welded the stabilizers to my trailer but changed the hitch pins to the next the next larger size. My max load will be in the neighborhood of 5000 lbs and I wanted to give These stabilizers the best chance for success. 146955
Good quality drop leg and tube. But the pin is undersized for the hole. 1/2" hole with 5/16" pin, a lot of slop. Easily fixed with a new pin but should've been supplied with the correct pin. 404530
Well made! Easily supports the rear of my 16ft lowboy while loading my tractor 778684
very happy with my stand made of solid construction very happy 762756
Look excellent and stout. I'll get them on my trailer ASAP to keep it level when loading my tractor. etrailers service was excellent and I received these in 3 days. I was expecting to take a week so they evidently were on it immediately. This is the type business I want to deal with! Rusty 736625
Product was well made, and as advertised. The product will be utilized to stabilize a trailer whlie loading and unloading. 735562
Thank you folks for helping me out with my order. You followed up with me right away on using my credit card issue. Thank you for looking out for the customer. It means alot 527079
I have been self employed for 35 years and it’s nice to see a company do business the right way !!! Great Job. 478397
works perfect.. 346201
Put these support Jack's on my trailer last week wow what a difference in stability when loading thank you you carry a great product 344858
Awesome product. They work well on my dump trailer when I load heavy equipment into the trailer. Easy weld on application and very strong. 286070
Product arrived quickly and in perfect condition. Very please with my purchase. 202492
Great product operated as advertised. Great vendor, quick shipping. 185566
Product arrived quickly and had adequate packing. They were easy to install on my trailer and were easy to use. The stands appeared to be of sufficient size and strength, however the pins that were provided were quite cheap. I purchased heavier securing pins to help secure the height adjustment. They resolved my problem and secured my trailer during the loading and unloading process. I would have given an excellent rating, but the fact that I needed to purchase pins that matched the hole diameter, lowered the rating. 150637
Good solid stabilizers. great service! 128964
I found this product to be very good quality and I am completely satisfied with it. 36017
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.