In-stock alternatives that can ship today
Heavy-duty, square, drop-leg jack is perfect for agricultural, construction, or other heavy-duty utility applications. Includes a sidewind crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height.
Features:
Specs:
If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity. But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity.
Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Note: Do not use landing gear to lift your trailer during tire changes or service work, because doing so will exceed the capacity of the landing gear.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Bulldog side wind square jack, with the non-spring return drop leg, 12 1/2 inch lift, and a 10,000 pound lift capacity. Now, this jack is perfect for agricultural, construction, live stock, or heavy duty utility application. It is a 4 inch square tubing. It's made of a 7 gauge alloy steel, gives you superior strength and durability. It has the painted inner and outer tubes, that are weather resistant, along with the drop leg, is painted. Now, the gear box right here, for the top, is very easy to access for routine maintenance. Over here, you can see it has the two greased inaudible 00:00:35 fittings for easy lubrication.
Now, this is a drop leg, with a non-spring return, which will increase the overall extension for maximum adjustability. Now, when we say non-spring return, it basically means that you will have to physically lift the jack at the foot to return it to the up position, does use the side facing drop leg plunger pin to hold the drop leg in place. This is a direct weld design. The side wind crank, as you can see, is included. The standard foot plate is all included. Now, this jack can be paired with the Bulldog Jack, part number BD182411, to give you a tandem application.
I do want to give you a few specs on this. The overall bracket height on this, which will be measured from the ground up to the top, here, you put a ruler on that, can see it's going to be right at 27 and 3/8 inches, retract it. Now, this does have a lift of 12 1/2 inches. If we fully crank this out and extended it all the way it would measure from the ground to the top, 39 7/8 inches. The drop leg travel, when you pull the pin out, it will travel the maximum of 13 1/2 inches. Again, this is a four inch square tubing.
Again, the lift capacity on this is 10,000 pounds, and the static load capacity on this is 12,000. Basically, just store your handle like that, when you put it back into place, then you're able to crank it. That should do it for the review on the Bulldog side wind, square jack with the non-spring return drop leg, 12 1/2 inch lift, and a 10,000 pound lift capacity.
Average Customer Rating: 4.7 out of 5 stars (54 Customer Reviews)
Heavy-duty, square, drop-leg jack is perfect for agricultural, construction, or other heavy-duty utility applications. Includes a sidewind crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height.
Everything seems great.
Looks great and super fast shipping. Th anks.
Great jacks !
Exactly what we needed and delivered very quickly.
Just want I order,took off the old jack and replace with the new one
Product was exactly as shown and I received the items the next day.
Great Service
Great product and pricing. Fast shippin g!
Better for cranking than the one we had before !! Fast delivery and we welded it same day in 20 minutes
Jack works great
Great products and excellent customer s ervice.
We replaced our broken jack. Works grea t!
Very satisfied with the product and the service!!
Delivered as advertised and is working well.
good experience to purchase and good pr oduct
Great product. Exactly what I was expec ting
Not received yet. Unable the review until it is placed on the trailer and used for at lease one year.
Always like the bulldog product because it's reliable
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.