fall hauling headquarters

Price: $226.17

In Stock

Landing Gear Set - 20-1/2" Travel - 8,000 lbs

Item # RVLG-8000

lowest price pledge

Retail:$284.49

Our Price: $226.17

Camper Jack

This item qualifies for Free Shipping

Shipping Weight: 60 lbs

Estimated Delivery: Friday, October 26

Enter a zip code for a more accurate estimate.

Quantity: 

In Stock
Camper Jack RVLG-8000 - Sidewind Jack - etrailer
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
Camper Jack RVLG-8000 - Sidewind Jack - etrailer
etrailer Sidewind Jack Camper Jack - RVLG-8000
RVLG-8000 - 21-1/8 Inch Lift etrailer Landing Gear
etrailer Camper Jack - RVLG-8000
RVLG-8000 - 21-1/8 Inch Lift etrailer Camper Jack
RVLG-8000 - 8000 lbs etrailer Landing Gear
RVLG-8000 - 8000 lbs etrailer Landing Gear
Landing Gear Set - 20-1/2" Travel - 8,000 lbs 21-1/8 Inch Lift RVLG-8000
RVLG-8000 - 8000 lbs etrailer Camper Jack
etrailer Camper Jack - RVLG-8000
RVLG-8000 - 21-1/8 Inch Lift etrailer Camper Jack
etrailer Landing Gear - RVLG-8000
etrailer Camper Jack - RVLG-8000
etrailer Camper Jack - RVLG-8000
RVLG-8000 - 8000 lbs etrailer Camper Jack
Landing Gear Set - 20-1/2" Travel - 8,000 lbs 21-1/8 Inch Lift RVLG-8000

Customer Photos

Videos


  • Landing Gear
  • 8000 lbs
  • Sidewind Jack
  • etrailer
  • 21-1/8 Inch Lift
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (M1230) sold separately. Call 800-298-8924 to order etrailer camper jack part number RVLG-8000 or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for Landing Gear Set - 20-1/2" Travel - 8,000 lbs. Camper Jack reviews from real customers.


  • All Info
  • Reviews (64)
  • Q & A (86)
  • Videos (1)
  • Photos
  • Used (2)
  • Why etrailer?

etrailer Camper Jack - RVLG-8000

Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (M1230) sold separately.


Features:

  • Landing gear set lets you raise and lower your trailer
    • Ideal for 5th-wheel trailers and RVs
  • Connecting rod allows for simple, tandem operation
  • Footplates offer stability and prevent sinking
  • Durable, black powder coated outer tubes and zinc-finished inner tubes provide excellent corrosion resistance
  • Manual hand crank (RVLG-HDL) sold separately
    • 12V DC motor (M1230 - sold separately) is available
    • Switch (LG-145236 - sold separately) is available


Specs:

  • Leg height:
    • Retracted: 32-3/4"
    • Extended: 53-1/4"
  • Travel: 20-1/2"
  • Drop leg travel: 16"
    • Adjustment hole spacing: 1" from center of hole to center of hole
  • Combined weight capacity: 8,000 lbs
  • Gear ratio 3:1
  • Distance between legs:
    • 44-1/2" When positioned as close together as possible
    • 72" When positioned as far apart as possible
  • Footplate dimensions: 8" long x 6-1/8" wide
  • Distance from bottom of upper weld stop to top of lower weld stop: 15-1/2"
  • Distance from top of upper weld stop to bottom of lower weld stop: 17-1/2"


Dimension of Landing Gear Set

Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.



RVLG-8000 Ram Landing Gear Set - 20-1/2" Travel - 8,000 lbs






Video of Landing Gear Set - 20-1/2" Travel - 8,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Camper Jack RVLG-8000 Review

Today we're going to be taking a look at the etrailer landing gear set. This is going to be perfect for fifth wheel trailers and RVs. It's a dual jack design. It's going to raise and lower for easy leveling. It's going to have this telescoping steel connecting rod. That's going to allow you to operate both at the same time.

At the bottom of each leg is going to be a foot plate, that's this large piece right here. That foot plate is going to really add a lot of stability to each leg and it's going to prevent sinking on softer surfaces. The unit also has drop legs at the bottom of each jack leg. That's going to allow for further adjustability. The unit's going to feature durable black powder coated finishing on the outer tubes. Zinc finishing on the inner tubes, drop leg, and foot plate, that's going to do a really great job at resisting rust and corrosion ensuring that these last and look good for a long time.

Now to operate the unit it does require a manual hand crank. That would connect to this piece right here. The hand crank is sold separately. You can find it at etrailer.com with part number RVLG-HDL. The unit can also have a 12 volt DC motor added to it.

That's available with part number M1230 and that's sold separately as well. Now I did some measurements on this unit. The overall retracted leg height, from the bottom of the foot plate to the top of the jack with the unit in the fully retracted position, measured 32 and 3/4 of an inch. I also did that measurement fully extended, as high as it will go without using the drop leg and got a measurement of 53 and 1/4 inches. If we subtract those measurements, that's going to give us a travel measurement of 20 and a half inches. The drop legs on the unit they're going to provide an additional 16 inches of travel.

Then the adjustment holes on those drop legs are separated on center by one inch. That's going to be the incremental height adjustment. The drive leg, that's this right here, this leg it has the gear box. With it in the fully retracted position, the gear box adds about another three inches. The retracted height with the gear box on there is going to be about 35 and 3/4 of an inch. Now the unit's going to feature a combined weight capacity of 8,000 pounds. The foot plates measure eight inches long by six and 1/8 of an inch wide. The unit is going to mount to the frame clamps on your trailer. It's got the weld stops on there. The frame clamps are also available at etrailer.com if your trailer is not already equipped with those. The distance between the weld stops, from the bottom of this one to the top of this one, that's going to be 15 and a half inches. From the top of this one to the bottom of this one is 17 and a half inches. You can take that measurement out to your trailer and see if this set up would work for you. That is a standard measurement, this will work on most applications. When the legs are as close together as possible, the distance that we have from inside of one leg to inside of the other leg measured around 44 and a half inches. I also telescoped this as far apart as possible, inside to inside the legs we're separated by 72 inches. That's going to do it for today's look at the etrailer landing gear set.


Customer Reviews

Landing Gear Set - 20-1/2" Travel - 8,000 lbs - RVLG-8000

Average Customer Rating:  4.8 out of 5 stars   (64 Customer Reviews)

Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (M1230) sold separately.

- RVLG-8000

by:


Ordered this from etrailer instead of other sites as I knew the shipping would be faster. Sure enough I got the item in 4 days on Thursday and Installed it on Sunday. Very quick and easy. Took longer to get all my tools and set up items together than the actual work. The item was a exact fit with installation being feeding the legs through the holes in the floor down from the inside and installing the 4 clamping bolts to hold them in, the gear box on the lead leg and the cross bar and motor. Now it purrs like a kitten when activated instead of clanking and creaking and blowing fuses. Actual install time was probably 1.5 hours taking my time and injecting extra grease into the gears and lead screw. These replacement units have a grease fitting for both which is great and should allow them to last forever! Being a safety freak I used a 3 ton jack with a 4X6 placed long ways to catch the I beams under the trailer then placed 3 ton car jacks under the frame also and for extra safety backed my truck bed under the tongue for extra security while I worked. The price was crazy great, the fit was excellent and the shipping was fast as usual. less money in parts and 2 hours of work probably easily saved me a grand over taking it to a RV repair shop! Thanks etrailer. Saved me again! 442977



- RVLG-8000

by:


Let me preface this review by saying this is the absolute least expensive solution to fixing your damaged landing gear. I recently purchased an old fifth wheel frame with intentions of turning it into a giant ATV trailer. Both legs on the old landing gear were bent and I began the search for replacements. Initially I had sticker shock looking at some other solutions until I found this! The price seemed reasonable and I have had excellent luck with etrailer in the past so I bought it. I knew it wouldn't be an exact replacement due to my landing gear being set too far apart. The package arrived within about 2 days (amazing since I live in VA) and I was able to install already. The install was super easy and I reused my previous connecting rod to make up the extra distance between the two. Overall this product is a great value. This product seems to be equivalent to the OEM quality. The only issue would be that I am going to have to modify the previous motor to be able to connect to this kit but etrailer makes a kit for this too. 469369



- RVLG-8000

by:


I called to order a new landing gear set for my 2004 Cougar by Keystone fifth wheel camper. The old landing gear had stripped the bevel gears, with this new gear set I was able to remove my old gear and install the new landing gear. The install was easy and was done within 30 minutes, I also reinstalled y old motor and it bolted right up to the new gearbox. My call to etrailer was a great customer service experience and I will be looking into my future purchases from them. I have also already recommended etrailer to my friends for their purchase needs. I give them 5 out of 5 stars!!! 422055



- RVLG-8000

by:


DO NOT get thrown by the low price of this unit. The RVLG 8000 works great. I have a 40’ 5th wheel and it was a very simple and direct replacment of the old one. The ordering was very easy and was received within a couple days. The whole replacement only took me (by myself) about 2 hours. This replaced the stock unit which was rated for 5500lbs lift this one is 8000lbs lift which worked much better. This unit also has grease fittings so you can easily keep them lubed. I also took the gear box apart and drilled and taped a grease fitting into it. Very good product I highly recommend it and etrailer. 526577



- RVLG-8000

by:


Landing gear bolted right up and is working great. Just installed then so I can not speak to longevity. They arrived promptly, ordered Monday received Thursday ( and there was a holiday on Wednesday so I was really impressed). My only contstructive comment would be regarding the hardware for the motor. Bolts for mounting the motor to the landing gear bracket were loose in the box and one was missing (I assume it fell out somewhere along the way rather than not being included) and that is why I would suggest taping or cling wrapping them to a larger part. There were no written instructions with the landing gear, but assembly was so simple and easy it was not needed. 540204



- RVLG-8000

by:


After contacting and confirming these trailer legs would fit my 5th wheel I ordered and received the items on time, after comparison to my original equipment I notice they were 10 inches shorter. after some calculations I determined they would still work, as I did not want to go through the hastle of returning. I had to make a few modifications to install and they work fine. the issue of them being shorter is that I must use them in a more extended position. On another note these items require More grease than what comes from the factory, the gear box had none, setup for failure! 512589



- RVLG-8000

by:


Replaced a pair of Atwood's with these. These were about 3" longer than the Atwood's and weld stops were in different places but I just welded them in. They have nice big feet and are very heavy. Atwood electric motor bolted right in. Overall very happy with the landing gear, as it was cheaper than just the replacement driver leg Atwood that was broke. 414274



- RVLG-8000

by:


Exact fit. Great customer service and shipping was 3 days earlier than expected! 2006 Fleetwood Gearbox 335 478423



- RVLG-8000

by:


Excellent fit,fastest delivery ever. The Rv repair shop wanted $140 an hr plus $405 for their landing gear ... oh plus tow because I couldn't get it hooked to truck.... So I saved over $600 easily, these legs are better quality and less expensive. I had them installed in2 hrs 333066



- RVLG-8000

by:


Strong heavy duty legs. Probably the biggest issues were related to the camper being a '99 model and a few things didn't simply fall into place. Mounting the original motor to the new (plastic) gearbox was a challenge, and I'm sure a new motor would mount right up to the new legs. There were a few challenges, but the new legs and old motor are now mated together and functioning properly. It just required a little time and fabrication on my part. 540553



- RVLG-8000

by:


etrailer.com's customer service is first rate. Product shipped next day and received it by the end of the week. Landing gear bolted right in. Only problem I had was the hole, in the tab that the hand crank passes through, did not line up with the gear shaft. The trailer is an older 1987 Road Ranger and enlarging the hole on the tab solved the problem. Landing jacks look to be well built, good price and great customer service. 438318



- RVLG-8000

by:


Item was packaged very well in a sturdy box that was sealed and included handles to assist with lifting it. The landing gear seam to be very well built and bolted right in place where the existing gear were. Start to finish was about a 2.5 hour job (mainly due to poor access on generator side of Raptor 300mp fifth wheel). Existing motor mounted without issue. Very satisfied with purchase and quick delivery!!! 431795



- RVLG-8000

by:


Ordered this for my 88 Prowler 5th wheel camper,the work part was with breaks to hydrate maybe 2 hours tops . The parts all fit and worked as if it were being built on the assembly line . The shipping box was heavy duty and looked good when it arrived,shipping as always was Faaaaaaaaasssssttt very fast :) . The only problem I had I guess was finding enough wood blocking to put under the frame . 544529



- RVLG-8000

by:


Better than the OEM jacks. Super price and excellent service with fast delivery. The jacks have 2 grease fittings on each jack. Something the OEM jacks didn’t have. 550155



- RVLG-8000

by:


Got product today and put the new landing gear on. Not a bad job this was my first. I have a bad back so that hendered me some but was still able to complete job and saved several dollars doing it myself. Hope it quite a while before I have to do again but when times comes etrailer will be my go to place. Great product and even better price. 396774


Comments

Gear still performing great money well spent.

Grant T - 06/20/2018

39997

- RVLG-8000

by:


These fit like a glove! I had been fighting with an old camper for years, the jacks had been mostly missing when I got it. The new ones didn't come with any instructions but it wasn't a problem, it was a pretty easy install. They shipped on time and tracking was provided, I always like that. Overall I am very satisfied with this purchase. 441250



- RVLG-8000

by:


The drive shaft was bent significantly. I don't think it could have happened normally during shipping, as it took quite a strong press to straighten it sufficiently. Also, the crossover bar was too short for my Hitchhiker II, so used my old one. Also the gearbox was not compatible with my Venture motor so had to use the old one. 539914



- RVLG-8000

by:


Lead landing gear for rv broke on Memorial Day. Contacted etrailer on same day, about a hour later received email parts were pulled and ready for shipment. Parts Received in two days and was a perfect fit. Shows me etrailer is a top notch company being on the job even on holidays making there customer #1. Thank You ! 515986



- RVLG-8000

by:


these are some heavy duty landing gear, replacing my light duty from forrest river toy hauler,i could not find any parts to repair my lead leg gears, although i will have to do some welding on the legs, the tabs on the outer tube are on the opposite side, they are worth the money and time invested 331753


Comments

great, stronger then stock, removing the old broken landing gear was a challenge, but the installation of the new gear was a lot easier

jaime - 01/27/2018

33827

- RVLG-8000

by:


Great product no problems getting it to work. I liked the fact it had grease fittings Since that was probably why my original equipment failed due to no grease but it lasted 24 years I hope to have 24+ from these thanks for a great product at a good price 511912



- RVLG-8000

by:


Very happy with the product but extremely disappointed with how it was shipped. The parts were tossed in a box with no packaging material leaving it scrached and beat up. Also missing hardware most likely due to the giant hole on the end of the box. 547366



- RVLG-8000

by:


Product came as described. Installation was fairly easy but some written instructions may be helpful for some people. Delivery time was excellent. I was able to replace my old landing gear set in less than 2 hours.. Thanks ETRAILER 544761



- RVLG-8000

by:


Great product Order online and was at my home in 2 days, fit perfect ,Did not take too long to install for a 65 year old man + wife .. Thanks etrailer for all the help you gave us to get us up and ready for our next camping trip.. 434305



- RVLG-8000

by:


I thought it would be hard to put on but it was so easy !!! And the customer service was great when I ordered through Internet not long after I got a call from etrailer I would recommend to everyone . Thank you guys for everything 270020



- RVLG-8000

by:


The landing gear fit like the original did. Appears to be good quality. Received it in a short period of time. Price was acceptable. I'm pleased with my purchase. I will shop with etrailer for future needs. Thanx 544495



- RVLG-8000

by:


I replaced a original jack system with this. It's much better quality then the original equipment. It has grease fittings to keep it lubricated. I was using it for the last 10 months on the road. 464068



- RVLG-8000

by:


Everything worked great. I love it. No more cranking!!!! Thank you for the fast shipment and a great product. I will be checking your site before buying anything from now on. Again, thanks 318749



- RVLG-8000

by:


great item good price fast shipping installed landing gear on a 2003 colorado it all fell right into place .would recommend this item to anyone . thank you etrailer. 433360



- RVLG-8000

by:


It was tricky at first but went on. I only needed one but then might as well put both on. Handles nice when lowering and raising. Held up just fine during a storm. 576086



- RVLG-8000

by:


The landing gear jacks I ordered came on time. I only replaced one of them at this time and it is working great. I will replace the other one in the near future. 327745


Comments

Its doing fine. There were a, couple of times when it skipped a tooth on the gear but thats all.

David H - 12/24/2017

32244

- RVLG-8000

by:


Excellent customer service. Knew exactly what my model needed. Fast shipping. Easy installation. Very satisfied customer. Will order again from etrailer. 484196



- RVLG-8000

by:


I used these for an older Fleetwood and they fit fine, but I did have to weld new tabs onto the legs as the manufactured ones were about an inch off. 523767



- RVLG-8000

by:


Replaced landing gear on my 2007 Cougar. Fit perfectly without ANY modifications. This is built much better than original. Took about 1 hour to do. 364673



- RVLG-8000

by:


This company delivered as promised and fallowed up to let me know when the package was delivered their customer service is to rate in my eyes 503411



- RVLG-8000

by:


The landing gear looks great and the Gear box looks heavy duty as well but only time will tell. I did get a much better price from etrailer. 342813



- RVLG-8000

by:


Thank you for all your help and all the parts work great . And you have great service and I like the quick service thank you so much. 482776



- RVLG-8000

by:


fairly easy to install although very heavy. used floor jack to align each arm. thor fifth wheel has corner doors making access easy 490199



- RVLG-8000

by:


Some instructions would have been nice. Looks well built. Could have been nice if there were good demsions before purchased. 249073



- RVLG-8000

by:


No instruction...This would have been nice to have instructions. Otherwise it is a very good product. 434562



- RVLG-8000

by:


Very good product, easy installation! It was a direct fit. Prompt delivery! Excellent service! 427513



- RVLG-8000

by:


It was exactly what you said it was. And got it super fast thank you all so much great product 387882



- RVLG-8000

by:


The jacks were everything I hoped for and are working perfectly I highly recommend them. 555271



- RVLG-8000

by:


The landing gear are exactly what I ordered! They fit the trailer perfectly. Thanks 457479



- RVLG-8000

by:


EVERYTHING WENT GREAT EXCEPT I DID NOT GET BOLTS FOR THE MOTOR. THANKS BUDDY LAM 548309



- RVLG-8000

by:


Good product. easy to replace it was exactly as the old one thank you 360866



- RVLG-8000

by:


Great product no problems easy installation works great, thank you 470844



- RVLG-8000

by:


Was delivered 2-17-17 liked the price compared to others Thanks 343107



- RVLG-8000

by:


Product is well worth the price! Anywhere local was $400 more 422213



- RVLG-8000

by:


Love the new landing gear easy to hook up to my camper 516269



- RVLG-8000

by:


Very fast delivery. Fits good and easy to install. 519379


52
66
Show More Reviews

Ask the Experts about this etrailer Camper Jack
Do you have a question about this Camper Jack?


  • Replacement Landing Gear for 2011 Jayco Eagle 5th Wheel Trailer
  • You do have landing gear with an odd measurement, but all of the replacement landing gear will be the 29.5 inches or 33.5 inches long. The # LC241846 is 29.5 inches long on that outer tube. Even with the difference in height, the mount locations for the brackets will be 17.5 inches so you can get a replacement landing gear set that is compatible. I've attached a photo to help. For that same 8,000 lb capacity, I recommend # RVLG-8000 to give you matching legs that are compatible...
    view full answer...

  • Availability of Replacement Parts for RBW Landing Gear on 1989 Fleetwood Prowler 5th Wheel
  • I contacted Fleetwood RV, the maker of your 1989 Prowler 5th Wheel. Due to the age of the trailer they no longer have much information on it, but they advised that the original landing gear was electric (powered) and made by RBW. They could not tell me the weight of your 1989 5th wheel trailer nor the particular model nor weight rating of your landing gear. AL-KO no longer manufactures replacement parts for RBW landing gear, but there are companies offering some parts. In order to identify...
    view full answer...

  • Replacing Venture Motor on Atwood Gear Box on Powered Landing Gear
  • If your motor runs but the landing gear does not move (except when manually cranked) this suggests that the gearbox in the landing gear is still functioning properly but that there is some issue preventing the motor torque from reaching the gearbox. First I suggest you unbolt the motor from the landing gear. Check the motor drive shaft; it is possible that it has been sheared off. If the motor were to remain on after the landing gear legs are fully retracted or fully extended all the...
    view full answer...

  • Can etrailer Landing Gear Replace Landing Gear On 2007 Montana Fifth Wheel Trailer
  • The etrailer Landing Gear Set, part # RVLG-8000 can be used to replace the landing gear set you have on your 2007 Montana. The hand crank is available as a separate item and is part # RVLG-HDL. Most landing gears are interchangeable but you can take a quick measurement to make sure this works for you. The weld stops measure 15-1/2 inches inside to inside and 17-1/2 inches outside to outside. For a landing gear with a manual crank included you can order part # RVLG-8HDL. You can...
    view full answer...

  • Is there a Way to Identify 5th Wheel Trailer Landing Gear with No Markings
  • It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you haven't already. Many landing gear parts are interchangeable among the different manufacturers but this is not always the case so identifying the manufacture and/or model number is important. Another option is to replace the landing gear with...
    view full answer...

  • Replacement Motor for Landing Gear on 2003 Coachman 5th Wheel
  • Manufacturers of 5th wheel trailers do not usually maintain detailed records of the landing gear they install but we do carry replacement motors that work for a wide range of brands like Lippert, Venture, Ram and others. Often a replacement motor from another brand will also work just fine too. I went to our warehouse to measure this motor's mounting hole spacing and the linked photo shows this 4-inch dimension. The part # M1230 is specified to fit both etrailer brand and Ram landing...
    view full answer...

  • Replacement Motor for Lippert Components Power Stabilizer Jack LC337199
  • Replacement motor # M1230 fits Ram brand landing gear # RVLG-8000 but not your Lippert Components Power Stabilizer Jack # LC337199. For a replacement motor for this stabilizer you will need Klauber motor part # LC352338.
    view full answer...

  • Replacement Landing Gear for 1987 Fleetwood Terry 27-1/2-foot 5th Wheel Trailer
  • Based on my research on the 1987 Terry M27-5G 5th wheel, the Acme OEM landing gear supplied was produced by RBW. I contacted the trailer manufacturer, Fleetwood, but even though you provided your trailer VIN number (thank you) they are unable to provide any specifics about the RBW landing gear on your trailer. Their records go back only to 1990. According to my research your M27-5G trailer weighs 5725-lbs. If you wish to replace the landing gear you can use the link provided to review...
    view full answer...

  • Landing Gear Recommendation for Replacement on a Jayco Eagle Fifth Wheel
  • Normally when people say they have a 11-1/2 inches they are measuring between the brackets like you mentioned but the measurement to look for is on the outsides which for you would be 15-1/2 inches and the etrailer Landing Gear Set, part # RVLG-8000 would fit and work well as a replacement.
    view full answer...

  • How to Determine Correct Landing Gear for a 2010 Keystone Cougar Fifth Wheel
  • To determine if the Landing Gear # RVLG-8000 will fit your 20110 Keystone Cougar you first need to determine the distance between the weld stops on your current gear. If your weld stops (see attached picture) measure 15-1/2" on the inside and 17-1/2" on the outside then the 8K landing gear will do a great job and fit your Keystone Cougar. Let me know if your weld stops are in different locations and I can help you out. Although a lot of motors can be used in place of another one I...
    view full answer...

  • Atwood Gear Repair Kits for 5th Wheel Landing Gear
  • When it comes to 5th wheel landing gear like # RVLG-8000, tongue jacks or winches, it is usually best in the long run to use an over-spec product that can handle more weight than you're going to ask it to. This tends to increase the working lifespan of such items since they will then be operated conservatively, well below their limits. Landing gear rated for 1000-lbs on a 14k+ trailer is surely a bit on the light side. Atwood landing gear repair kits are shown on the linked page. These...
    view full answer...

  • How to Identify Correct Replacement Driver Leg for Atwood Landing Gear on 2002 Cardinal 5th Wheel
  • If you have found metal shavings within the driver leg of your Atwood landing gear it does sound as though the unit may indeed have been damaged. The Cardinal 5th wheel RVs are manufactured by Forest River RV. I checked the specifications for the 2002 Cardinal 5th wheels and there is no 29-foot trailer shown, but there are two model numbers for 30-foot 5th wheel trailers, M28-WB and M29-RLB. Unfortunately no specifics about replacement parts are available from Forest River without a...
    view full answer...

  • Landing Gear Skips and Legs Wont Extend When Raising Trailer Jack
  • If it a jack isn't able to raise a trailer properly it's generally because it isn't getting enough power or there is hardware problem. I would first check the wiring and make sure there isn't a short. Also, inspect and clean the location of the ground. It needs to be a clean bare metal surface. Also, test the battery. It could be the motor is just fine but the battery isn't providing enough power and needs to be replaced. If there isn't a power issue then the problem, and you've...
    view full answer...

  • Replacement Landing Gear Recommendation for Salem By Forest River
  • The part # RVLG-8000 is going to work well for you since you said the dimensions are the same. The motor kit for this set is part # M1230 and although it may mount differently it will work. The big thing with these kits is the dimensions matching where the landing gear attaches to the trailer. The standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the legs of the jack like what you see in the picture I attached.
    view full answer...

  • Will etrailer.com Landing Gear Set Fit Keystone Alpine Fifth Wheel
  • Keystone Montanas use a unique landing gear set, but an Alpine would use a standard dimension landing gear set like what the Landing Gear Set part # RVLG-8000 is designed to fit. This would be a great set to replace what you have or for just the follow leg you'd want the part # LC179014.
    view full answer...

  • Replacement Landing Gear Motor and Gear Box Needed for a 2004 Keystone Montana 2980
  • I do have a solution for you, but unfortunately manufacturers don't keep that kind of information on file. You could try using a replacement gearbox like part # RVLG-RDBOX and the compatible motor # M1230 that fits Ram jacks, but without knowing the manufacturer and part number it would just be a guess as to whether it is the correct part or not. What I recommend doing is going ahead and just replacing your whole landing gear setup. It might be getting close to time to do that anyways...
    view full answer...

  • Landing Gear Recommendation for 2010 Jayco Designer 35 RLTS
  • The standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the actual legs like what you have. The etrailer Landing Gear Set, part # RVLG-8000 can be used to replace the landing gear set you have on your 2010 Jayco Designer as it fits the standard dimensions you have.
    view full answer...

  • Replacement Landing Gear Recommendation for 2004 Keystone Montana Landing
  • If you have a Keystone Montana RV the correct kit is the part # LC178652 and # LC178653. The mounting brackets of the part # RVLG-8000 are the same but the dimensions otherwise are different enough that you'd not be able to use it.
    view full answer...

  • Replacement Landing Gear For 2009 Keystone Everest
  • The Landing Gear Kit part # RVLG-8000 is a fit for your 2009 Keystone Everest. This kit is designed to fit trailers with weld stops that are 17-1/2 inches apart from each other measured on the outsides of the stops. From speaking with a previous customer we have found that your trailer is a match for this kit's mounting dimensions. This kit has a lifting capacity of 8k which would work well for your trailer. I attached a picture that shows this.
    view full answer...

  • Motor and Switch Parts to Convert Landing Gear Set RVLG-8000 to Powered Operation
  • The gear box included in the etrailer Landing Gear Set # RVLG-8000 has pretty much standard dimensions, approximately 5-1/2-inches wide x 7-inches tall. It should fit in the same space as the original. The motor assembly that converts to a powered landing gear setup, part # M1230, bolts right up to the gearbox. The switch is NOT included with the motor but we offer part # LG-145236.
    view full answer...

  • Landing Gear Recommendations for a 2010 Forest River Cardinal 3450
  • The Bulldog Velocity series jack, # BD185400, would give you the least problems because of its use of a ball-bearing design and not regular screw and nut like other jacks. The result is less friction, less wear and tear, and faster operation. This jack is sold as a single jack only so you would have to get 2 of them and the control box to control the 2 jacks is sold separately as # BD500379. The next best thing would be a Lippert set such as # LC333964. Lippert makes the majority of...
    view full answer...

  • Troubleshooting Atwood Landing Gear Leg That Doesn't Move
  • It sounds like the screw itself is damaged if the motor and gears are turning but the leg isn't moving. Atwood no longer is in the 5th wheel landing gear business so I recommend replacing your landing gear completely. The reason you would need to change out your whole set is because both legs need to move at the same ratio so that your trailer raises and lowers evenly on both sides. Since replacement parts are already becoming scarce for Atwood landing gear it would be better in the...
    view full answer...


Do you have a question about this Camper Jack?


Used Items Available
RU-18-R0-00108971

Condition: Missing Parts

Notes: Item is missing all screws and washers and has heavy scratches and pain damage

Our Price: $233.50

Secure Checkout
RU-18-R0-00010294

Condition: Surface Scratches

Notes: This has been installed but never used. It has surface scratches but is overall in good condition.

Our Price: $275.29

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Expert Research:
Jeffrey L
Photos by:
Zach O
Updated by:
Sarah W
Written by:
Amanda M
Updated by:
Hannah L
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.