Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs

Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs

Item # UF17-943010

lowest price pledge

Retail:$801.90

Our Price: $632.78

You Save: $169.12
Camper Jack

This item qualifies for Free Shipping

Shipping Weight: 74 lbs

Arrives before Christmas with Ground or 3 Day Shipping.
Quantity: 
In Stock, Ships Today
Ultra-Fab Products Landing Gear - UF17-943010
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
Ultra-Fab Products Landing Gear - UF17-943010
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs 38 Inch Lift UF17-943010
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs 38 Inch Lift UF17-943010
Camper Jack UF17-943010 - 12000 lbs - Ultra-Fab Products
Ultra-Fab Products 38 Inch Lift Camper Jack - UF17-943010
Ultra-Fab Products Camper Jack - UF17-943010
UF17-943010 - Electric Jack Ultra-Fab Products Camper Jack
Ultra-Fab Products Electric Jack Camper Jack - UF17-943010
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs Weld-On UF17-943010
UF17-943010 - 38 Inch Lift Ultra-Fab Products Landing Gear
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs 12000 lbs UF17-943010
Ultra-Fab Products Camper Jack - UF17-943010
Camper Jack UF17-943010 - Weld-On - Ultra-Fab Products
Ultra-Fab Products 38 Inch Lift Camper Jack - UF17-943010
UF17-943010 - 12000 lbs Ultra-Fab Products Camper Jack
Ultra-Fab Products Camper Jack - UF17-943010
UF17-943010 - 12000 lbs Ultra-Fab Products Landing Gear
Ultra-Fab Products Camper Jack - UF17-943010
UF17-943010 - 12000 lbs Ultra-Fab Products Camper Jack
UF17-943010 - Electric Jack Ultra-Fab Products Camper Jack
UF17-943010 - Weld-On Ultra-Fab Products Landing Gear
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs 38 Inch Lift UF17-943010

Customer Photos

Videos


  • Landing Gear
  • 12000 lbs
  • Electric Jack
  • Ultra-Fab Products
  • 38 Inch Lift
  • Weld-On
Specially designed to raise, level and support your trailer or RV, this pair of electric jacks features powerful, 12-volt motors that function independently of one another for simple, effective leveling. Extra-large footplates help prevent sinking. Call 800-298-8924 to order Ultra-Fab Products camper jack part number UF17-943010 or order online at etrailer.com. Free expert support on all Ultra-Fab Products products. Guaranteed Lowest Price and Fastest Shipping for Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs. Camper Jack reviews from real customers.


  • All Info
  • Reviews (72)
  • Q & A (208)
  • Videos (1)
  • Photos
  • Why etrailer?

Ultra-Fab Products Camper Jack - UF17-943010

Specially designed to raise, level and support your trailer or RV, this pair of electric jacks features powerful, 12-volt motors that function independently of one another for simple, effective leveling. Extra-large footplates help prevent sinking.


Features:

  • Perfect for 5th-wheel and gooseneck trailers and RVs
  • Dual electric jacks raise and lower with the flip of a switch - no more hand cranking
    • Each 12V DC motor has its own toggle switch
  • Jacks operate independently for simple, accurate leveling
  • Built-in clutch prevents damage from overextension
  • Extra-large footplates offer superior stability
    • Helps to prevent sinking and tilting
  • Simple installation
    • Weld hangers to front of trailer frame, beneath overhang
    • Bolt jacks to hangers
    • Mount switches anywhere on trailer for easy access
  • Sturdy steel construction


Specs:

  • Bracket height:
    • 36" Retracted
    • 74" Extended
  • Lift: 38"
  • Rate of travel: 15 seconds/inch
  • Combined weight capacity: 12,000 lbs
  • Footplate dimensions: 8" long x 5-3/4" wide
  • Distance from top of motor to first weld point: 8-1/2"
  • 3-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.



17-943010 UltraFab 5th-Wheel Landing Gear - 12,000 lbs



UF17-943010 Installation InstructionsInstallation Details UF17-943010 Installation instructions


Video of Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ultra-Fab Products Camper Jack UF17-943010 Review

Today we're going to be taking a look at the Ultra-Fab Deluxe electric landing gear set. This is perfect for fifth-wheel and goose-neck trailers and RV's. It's going to feature dual-electric jacks that raise and lower with the flip of a switch, so no more hand-cranking. Each 12-volt DC motor has its own toggle switch, wiring and 30-amp fuse. This is the toggle switch. It has wiring already running to it. It's going to come with a rubber gasket for a nice tight seal at the mounting location.

Four mount holes here at the base, and then just an easy to use toggle switch with a weather-proof design. Also, plenty of wiring, and then again, each one is going to come with a 30-amp fuse that's in there. One of the neatest features about this unit is that the jacks operate independently for simple and accurate leveling. That's also going to help when hitching and unhitching. The jacks are going to feature a built-in clutch that's designed to prevent damage from over-extension and each jack is going to come with the extra-large foot plates that offer superior stability, which is going to help prevent sinking and tilting. A neat design of the foot plates is that they're going to be held in place here with a pin and clip. There's going to be four holes that go around there, so what that means is that that foot plate can be oriented however you want it at the bottom of the unit. Pretty simple installation.

You would need to weld the hangers to the front of the trailer frame beneath the overhang. It does come with four hangers, two per jack. The jack is going to feature stops on three sides of this tube, which is great. It's a great feature to have. Nice, secure design. On this side right here, we don't have any stops, but on this side you're going to have three stops.

On this side you're going to have three stops, and on this side you're going to have three stops. When using this, if you're doing a replacement, in the instructions are going to be the measurements that you need to determine whether your current hanger locations will match up with what this jack requires. If you're welding on your new hangers that come with this unit, you would want to use location A, which is this one, and location C, which is this one, or you could use location A and location B. You never want to use location B and C together. Always use A and B, or A and C.

You can find all that information in the included instructions, but you'd weld those hangers to the front of the trailer frame beneath the overhang, and then you would bolt the jacks to the hangers. It does come with your necessary hardware for that step. Then you'll need to mount your switches anywhere on the trailer for easy access. Mounting hardware to get your switches installed are not included, so that will need to be provided separately. The jacks themselves are made from a 9 steel construction with a protective finish. It's going to keep the unit safe from rust and corrosion, and it does feature grease zerk fittings which allow for easy maintenance. Right up here, on the head we're going to have a zerk fitting. Then you're going to have this band right here. This is just a nice, thick rubber band. Pull that down and it exposes a hole. Once you have the inner tube and the outer tube lined up correctly, that will actually expose another grease zerk fitting, which again simply allows for easy maintenance. When it comes to the bracket height, what that means is pretty much the overall height of the unit. It's about 36" when's it fully retracted, 74" when it's fully extended. The stroke of the motor is 21", and then you're going to have this drop plate right here with a pin and clip. That's going offer an additional 17" of travel, so the total lift for each jack is going to be 38" per jack. The rate of travel is about 15 seconds per inch. These are very heavy-duty. They're going to feature a combined weight capacity of 12,000 pounds, so 6000 pounds per jack. A few other things that I just want to mention real quick is, when it comes to the dimensions of the foot plate, it's going to measure 8" long by about 5 3/4" wide. The distance that I got when I measured from the top of the motor to the first weld point was about 8 1/2". The out tube's a square design that measures 2 1/2" by 2 1/2 inches. I also want to mention that an important note is that the landing gear is designed to stabilize a portion of your trailer's weight. It's not designed to support the full gross vehicle weight rating of your trailer. Be careful not to use the landing gear to lift your trailer or RV during tire changes or service, because doing so will actually exceed the capacity of the landing legs. That's going to do it for today's look at the Ultra-Fab Deluxe electric landing gear set with a combined capacity of 12,000 pounds.


Customer Reviews

Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs - UF17-943010

Average Customer Rating:  4.7 out of 5 stars   (72 Customer Reviews)

Specially designed to raise, level and support your trailer or RV, this pair of electric jacks features powerful, 12-volt motors that function independently of one another for simple, effective leveling. Extra-large footplates help prevent sinking.

- UF17-943010

by:


Good jacks but lousy switches, ended up purchasing an Atwood switch to run legs independently or in YANDEM. 165476



- UF17-943010

by:


I used them for the first time this past week and they worked just fine. Thanks again, Robert Aguiar 104412



- UF17-943010

by:


Jack works OK for my application. The control switch did not survive one year of use. That could be better. 364713


Comments

still working good.

Bill K - 04/08/2018

37061

- UF17-943010

by:


The product arrived on time with great communication from etrailer. I chose the Ultra Fab over the Bulldog because of the 2000# higher load rating and the better reviews. My bracket spacing is 17 1/2 " so I knew I would have to modify the legs which I did. This was easier to do on my bench in my shop than weld the new brackets onto my trailer in the field. I have not installed them yet as my rv is broke down 500 mi from home. I'll go out to it next week with what I hope is a bolt on solution. The legs look heavy duty and bench tested well. 518790



- UF17-943010

by:


WITH THE EXCEPTION OF HAVING TO GRIND OFF A PORTION OF THE LOWER MOUNT TAB , THE INSTALLATION WAS SIMPLE AND TOOK ABOUT AN HOUR AND A HALF. THESE WORK MUCH BETTER THAN MY ORIGINAL JACKS. THE RECOMMENDATION OF PURCHASING REPLACEMENT LEG LATCHES AT THE TIME OF ORDERING WOULD HAVE SAVED ME ADDITIONAL COST OF SEPARATE SHIPPING. 209748



- UF17-943010

by:


My ordered one day early which was very helpful because we are leaving on vacation in two days. The lifts bolted right in my Heartland Fifth wheel. However Inwas not very impressed with the switches. They are not very compatible for an exterior installation as they look bulky. I did replace the switchs. The operation of the landing gear is very smooth and fast. Overall I am very satisfied with the product and the service from etrailer. 421723



- UF17-943010

by:


JUST RECEIVED MY ULTRA-FAB 5TH WHEEL LANDING GEAR, GREAT SERVICE FROM E-TRAILER.THEY WERE VERY KNOWLEDGEABLE ABOUT THEIR PRODUCTS.HAVE NOT INSTALLED THE LEGS AS OF YET BUT WILL BOLT RIGHT ON TO MY EXISTING BRACKETS OF MY 32 FT. THOR JAZZ 5TH WHEEL. I WILL DEFINITELY DO BUSINESS WITH E-TRAILER AGAIN. MICHELLE WAS VERY HELPFUL THANK YOU . RALPH SCRIBNER 292453



- UF17-943010

by:


I recieved the product one day earlier than expected, so was therefore was able to install the product sooner. The product was everything I expected it to be. The jacks that came from the factory had a 6,000 pound lifting capacity for the two. One electric motor and gear assembly was installed and burned out the motor after years of use. The coach weighs in at 13,000 pounds empty and the new jacks lift the front of the 5th wheel with no strain. I would recommend anyone with a 5th wheel that weighs more than 10,000 pounds replace the jacks with these. 146083



- UF17-943010

by:


I have not installed them yet, but they appear to be exact replacements for the broken one on my trailer. The price was competitive, the ordering was easy and the delivery was prompt. Thanks, 25578



- UF17-943010

by:


These landing gear were used to replace the originals in my 1996 Hitchhiker. Even when the rig was not loaded the original jacks would not raise the rig enough to back the truck into the hitch. It does seem strange to me though that a remote isn't part of the package. The wire work and switches installation was a chore. Some kind of an exterior switch box install kit would enhance the set to a great degree. Overall a very good product for the price. 296298


Comments

The landing gear jacks work perfectly. I still question why they do not come with either a wired or wireless remote. Such an item would have made a good product an excellent product.

Daniel A - 09/19/2017

28316

- UF17-943010

by:


Upgraded my 2008 Weekend Warrior LED 3505 to the Ultra-Fab and couldn't be happier! The original Venture landing gear was complete garbage and has failed 3 times now. The Ultra Fab landing gear lifts much faster and sounds better. Another positive thing is the storage space I gained over the generator from removing original erector set. Ultra-Fab landing gear is much more robust compared to the original. I'm completely pleased with etrailer.com and their awesome service. I've talked a friend of mine into upgrading his garbage gear to the Ultra-Fab from etrailer. It was a bit of work to install, but my only regret is that I didn't do it sooner. Thanks, etrailer! 511155



- UF17-943010

by:


2009 Heartland Razor Toy hauler. OEM Junk never lifted will and usually had to be plugged in or have the Generator Running to lift the 16K Trailer ( around 6K tongue weight) Removed the old junk. Installed these. The Original Tabs were almost exact as these. Used a little weld to secure things up. They lift the trailer without any difficulty. I wished I'd not waited until my old ones completely failed to replace them. These make camping worry free. They even work well without being plugged up to shore line. 241707


Comments

Working great. Absolutely glad I replaced the OEM with these

Jeff W - 03/26/2017

22972

- UF17-943010

by:


I bought this item and had a welder weld up brackets Installed (wired up motors ) and one did not work .. called company they gave me phone number of manafacture and I called .. got tech on phone ... had motor in 3 days and just now wired up and is working fine ... they seem a little slow but I have a 36ā€™ goose neck with a lot of weight up front with living quarters and etc Iā€™m happy with them and would recommend them 551307



- UF17-943010

by:


I have a 48 foot camper and the legs folded. I went to etrailer.com and found the legs. I contacted etrailer.com and spoke with Matthew C. We both reviewed the product and agreed that they should work. This was a Wednesday and I told him that I needed to have them by Friday because I had sold the camper which was to be picked up on Saturday. Matt told me he would personally see to it that they got shipped that day. They arrived Friday as he assured me, I put them on Friday afternoon and the camper left Saturday morning. They fit perfectly. I recommend etrailer and Matthew to anyone. Their product was perfect and Matthew was exceptional in helping me with my needs. 118449



- UF17-943010

by:


The Ultra Fab Fifth Wheel Landing Gear is a great addition to my camper. Installation was simple and easy. Works great and makes leveling our Fifth Wheel so much easier and quicker. I recommend etrailer for anyone needing parts or accessories. 246138



- UF17-943010

by:


Ordered then received gear in timely manner , looks to be very high quality . Installed gear in my Hartland Big Country 3250 my brackets were spaced 17.5 inches apart, the gears welded tabs were 19" it would have been very hard to cut my existing brackets off then reweld as they are inside the front storage compartment it was a simple fix as I welded 1.5" flat stock above the existing bottom welded tabs on the gear giving me the needed 17.5 spacing. WOW what an improvement , they raise my rig effortlessly very pleased. 125437


Comments

Michael,What year is your Big Country and do you know the hitch weight? Weve got a 2011 3510RL and the gear has failed completely.

-- comment by: Jon V - 06/29/2014

5203

- UF17-943010

by:


Just installed, The install was easy for us. The old brackets were able to be used with just one shim. Our trailer is a 94 Terry. Have only lifted the trailer once, so will have to report later on how well they function. 202795


Comments

Been working well. Dont miss the old hand crank system.

David H - 06/12/2016

18526

- UF17-943010

by:


After the installation of a 5500 watt generator and 4 golf cart type batteries into the front storage compartment, the old landing gear was struggling to lift the coach. I chose the UF 12,000 lb units for this reason. Delivery was very quick. Installation on my 2011 Chaparral required the removal of the old hangers due to the vertical position of the drive motors on the Ultra-Fab units. Welded in the new hangers and installed the units. For purely cosmetic reasons, switches were a bit on the big side so to keep all the switches looking the same I replaced the provided switches with Stromberg Carlson LG-145236 Fifth Wheel Landing Gear switches. Once connected, the landing gear lifted the coach with ease with no noticeable strain on the drive motors. These are great units and I highly recommend them to anyone. 147537



- UF17-943010

by:


I replaced my Lippert single motor landing gear with the Ultra Fab UF17943010 Deluxe Landing Gear system with dual motors in my 40 Foot triple axle Toy Hauler, gross weight 18,000. The install on the passenger side was very fast, less than 1 hour. Since I have a generator installed on the driver side the install took longer as it required climbing over the generator in a tight working space. Installation of the Driver side landing gear took about 3 hours. I also installed the Atwood 3 switch system as I wanted to independently adjust each jack. These jacks worked great and it now possible to level the trailer side to side using the jacks in combination with 3 each of the Anderson # AM3604 Wheel Chock and Levelers. I recommendation this landing gear and just love working with etrailer. 375955



- UF17-943010

by:


Do not buy this product!! There is a significant gap between the leg sections. You will have Alot of play (spaghetti legs) I spoke with randy from the factory and was told there was nothing they could (or would do). Beware 50964


Comments

Mark H.You bring up the gap between the tubes that make up the Landing Legs. We have changed to tubing with thicker sidewall for greater strength and for this reason there has to be a gap between the tubes in order for them to fit together. There is going to be some sway issues with all conventional landing legs. That is why there are so many products on the market designed to stabilize trailers.An Example of these are Tri Pods and Struts that mount direct to the landing legs are just some available.RandyCustomer Service Ultra-fab Products Inc

-- comment by: Randy C - 10/09/2012

232

Thanks for the input Randy.

-- Patrick B - 10/10/2012


- UF17-943010

by:


gear was easy to install. i did not have to weld brackets to frame some slight modifications, so much faster than original landing gear, very pleased with product 298288



- UF17-943010

by:


The 20-year old, obsolete 15-tooth Atwood landing gear failed repeatedly in the 2 years since I bought the 22 foot 5th wheel camping trailer. The trailer had been raised for clearance on the Forest Service roads and the original jacks were just barely adequate when new; it was time for an upgrade. Although the trailer is only a 6,000 pound unit, I decided on the 12,000 pound rated gear because of the rough ground we often camp on and the individual operation of the legs, which really aids leveling. The UltraFab jacks are quality gear, excellent construction, fit and finish, complete with grease zerks. The wiring harness is proper, heavy 10 AWG and the weatherproof switches are solid. I cut out the old brackets and followed the instructions to position the jacks for the welder; it took less than an hour for him to weld in the brackets (though space was limited on my small camper). The end result was just what I hoped for; strong, solid support and NO MORE CRANKING! 133333



- UF17-943010

by:


I completely removed the existing landing gear from my 2010 Trailblazer fifth wheel while still hooked up to my pick up truck. The landing gear completely failed while trying to hook up in Pacific City, Oregon. We had to buy two 2x4 s and c clamps from a local hardware store. We clamped across the two landing legs and using the truck jack managed to lift the trailer one block at a time to get the truck hooked up. I installed the new landing gear using the existing welded U brackets. They lift the trailer easily. I modified the existing switch hole in the trailer to accept the two switches adjacent to each other so I can hold both switches at the same time to lift and lower the trailer. I also had excellent service from E Trailer. 144792


Comments

Excellent. Much better product than the factory installed. It also allows me to locally level the front of the trailer if only a slight adjustment is required

Malcolm D - 08/06/2015

13952

- UF17-943010

by:


Awesome kit. It was very complete and easy to install with moderate fabrication skills 156782



- UF17-943010

by:


Item was easy to purchase, very quick to ship. The price came in $170 cheaper than what the dealership could buy it for. Even with expedited shipping, I save over $100 by ordering myself. I've only used them twice to move the trailer, but the motors seem powerful and the jacks are sturdy. They lift/lower the 5th wheel, which weighs in at 13,800 pounds unloaded much quicker than the insufficient single motor unit that came stock. So far, I am happy with them. The advertised speed is listed at 1 inch every 15 seconds and it looks like that is pretty close to what it is. Not as quick as the hydraulic system I wanted, but hydro systems are HARD to find and quite a bit more expensive. I do have some criticism though... the switches are HUGE and will not fit in the stock switch compartment. Also, the pins on the jack feet are not spring assisted. Neither of those is a huge deal, but the switches are unprotected on the outside of the unit. Make sure you install where they are fairly safe. The pins on the jack aren't difficult to operate manually, just not as convenient as the spring assisted. Other than that.... these jacks are worth buying. If I find, for some reason, after more use that they are not what they appear to be, I will update my review. As of now, I am happy with them. 216912



- UF17-943010

by:


The jacks arrived in three days with the free shipping option. That's great service. I just finished the install, and I am pleased with the jacks. The installation was fairly straightforward. The tabs on the jacks with the 13.5" spacing fit my existing brackets like a glove. That's one of the reasons I ordered these jacks. I've only used the jacks so far to pick the camper up off the jack stands I had it on while swapping the jacks, but they didn't seem to be straining in the least. My old Atwood single motor jack system struggled every time I used it. These are the only issues I had with my installation: 1. One of the grease zerks was broken out of the plastic motor housing when the jacks arrived. From reading other reviews, that appears to be a fairly common issue. I'll pick up a zerk with larger threads and take care of that. 2. Six of the eight wires were not long enough for me. It wasn't a big deal to pick up some wire and lengthen them, but if they had been 10 feet long instead of 7 feet long, the installation would have been a little easier. 3. When the jacks are fully retracted, the bottom tube (without the foot installed) is about 4-6 inches up inside the opening on the trailer. The jacks have 21 inches of stroke, so this shouldn't be a big deal. I'll just have 15-18 inches of stroke instead. I could remedy this by cutting the existing brackets off my trailer and welding on the provided brackets lower, but that is a lot of unnecessary work. All in all, this is a great product, and I look forward to using the jacks. The single motor Atwood jack that came on the trailer has been my greatest source of dissatisfaction since the day I bought the trailer. Thanks to Ultra-Fab and E-Trailer. 310498


Comments

One year later these jacks are still working great. Raising my fifth wheel is no longer a stressful event. The fifth wheel manufacturers would be smart to install these jacks on new units instead of the crappy one motor jack systems. Thanks again to Ultra-Fab and ETrailer!

Mark M - 10/25/2017

29945

- UF17-943010

by:


I purchased this product to replace the landing gear that had failed on my 5th wheel. I called around to a few other dealers and they were not very helpful. Ricky S. at e trailer was able to give me the product specs. that I needed and took my order that day. My product arrived one day earlier than expected. I installed the new landing gear myself and I must say that if you are a mechanical novice don't attempt yourself. This of course depends on your coach design. Mine is a toy hauler and the passenger side jack is right next to the generator. It was a challenge to get the old jack out and the new one end. However with that being said the new landing gear works as advertised and I am happy that I used e trailer to make these needed repairs. 183079



- UF17-943010

by:


When I received the Jacks and opened the package, I noticed that one of the motor leads was cut all the way through. I did not want to wait for a replacement, so I spliced the wire back together.I installed them on my Holiday Alumalite fifth wheel. The spacing on the new jacks did not fit the exisiting brackets and it was impossiable to change them because of accessablity. I had to adapt the jack to fit the existing brackets. It took 5 hours for two experienced mechanics to install. Once the job was completed They work great. 195186


Comments

The Jacks are working great. I am happy with them. I should have done this years ago

Everett B - 06/26/2016

18970

- UF17-943010

by:


The jacks look like they will fit fine, and the instructions are clear except Figure 2 and 4 mentioned in the instructions are not printed or on the copy on the website. The jacks were missing the grease zercs, and they appear to have been pulled out or scrapped off. One hole was slightly elongated and plastic shavings were in both holes. The zercs were not in the box, and there was no sign of zerc impressions in the cardboard packing. I'd give you pictures, but I have already repaired them as best I can. New motorgear assembly part #17-75007.003 is needed, unless I can get the case itself. I have not contacted the manufacturer yet, but plan to do so. 100529



- UF17-943010

by:


The actual jack works perfect for what we r trying to do except it is very Slow!! Wish I knew that. 560714



- UF17-943010

by:


Jack's work great don't like the switches for Jack's 561615



- UF17-943010

by:


I was sick and tired of hand jacking my 14000 pound trailer up off the truck so I decided to purchase these 5th wheel jacks. They work great! They mounted right up to my original jack mounts and with a little wiring were off and running! They arrived a day early and are plenty strong to lift even a very heavy trailer. Not sure how much tongue weight my trailer actually has but I'm happy with the power available with these jacks. I would definitely recommend these jacks to anyone looking for a strong reliable jacking system for their trailer. 518076



- UF17-943010

by:


electric jacks were just what we needed for our trailer. they were shipped in atimely manor .they are working great 513617



- UF17-943010

by:


The product was shipped extremely quickly, they did a price match from a competitor and credited my card the same day, Wayne was extremely happy and the product is extremely durable. I had to make some slight changes to make them fit but am happy with the purchase. 386748


Comments

So far still good. They are quite a bit slower than the original ones but I dont mind waiting an extra 20-30 seconds for reliability and a much lower price. I would definitely purchase these again if the need arose.

Joe V - 06/19/2018

39940

- UF17-943010

by:


Love the product exactly what I was looking for and was exactly what was described. They work great, and bolted right on and the electrical connections were fairly easy just followed the directions and hooked them up. Install only took a couple of hours and that was with soldering the splices. Danny at etrailer was fantastic,he knew the product and was able to answer all my questions. I would give him and the jacks 5 stars Thanks Danny and etrailer I am very satisfied. The price was great also!! 583671



- UF17-943010

by:


These jacks are fantastic. Install took about 4 hours, using the existing brackets. With a generator, you may need to move the generator, and generator housing, out of the way to make room for the new jack(s). Not a big deal. I just unbolted the gen, and slid it over. These jacks are powerful (real powerful). They are pretty fast, and lift my 12,700 lb. 40' Toy Hauler with easy. I like that they are independent too. So much better than the crappy Stromberg Carlson jacks that came with my trailer (underrated motor, weak gear box, just crap). If you are going to service you cheap Stromberg Carlson jacks, just Bite-the-Bullet, and get Ultra-Fab set (UF17-943010). My only complaint are the switches for each jack. The switch housing is pretty basic (thin plastic). It would be better if there was a thicker housing for both switches. other than that, there is nothing to complain about. I've just installed these jacks, but, so far, super impressed. All the reviews post one year state they are still working great, I expect the same! 578018



- UF17-943010

by:


Perfect fit on our Carriage 5th wheel.Easy to install took about an hour.Thank You for saving me a $1000 bucks at the dealer. 486340



- UF17-943010

by:


These jacks are working great on my 36ā€™ 5th wheel. They handle the weight easily, and I like that I have the ability to operate eack jack independently or together. 484005



- UF17-943010

by:


If the landing gear is going in a toyhauler one side the generator at is a tight fit, I also used a different switch plate on the front of hauler 473244



- UF17-943010

by:


Order arrived in excellent shape and in a timely manner. 438789



- UF17-943010

by:


I installed these myself with one other person, pretty simple installation if the brackets already in place. They are setup for several different installation types. Everything seems like some pretty good material, very nice to have individual motors compared to some setups. 436484



- UF17-943010

by:


I have these jacks on a 40ft toyhauler they have been great sofar no issues at all i would recomend them to anyone who wanted power jacks cost is good also i had friends that own trailer companies and they couldnt get them for that price for half the weight jack 432541



- UF17-943010

by:


If you are making your own gooseneck trailer, these jacks are the way to go. The tank all of the work at raising the hitch off of your truck. They were easy to install , As well as wire. 410544



- UF17-943010

by:


Excellent product. Even though two of the existing brackets on my Montana 5th wheel were welded in crooked, the complete installation and wiring took less than three hours. I am very happy. 408424



- UF17-943010

by:


Prompt freight as promised. Jacks were everything described. Easy installation. Less than 1 hour to remove the old jacks, install and wire the jacks ordered. Thanks! 402344



- UF17-943010

by:


Great product! Highly recommend these jacks. 397526



- UF17-943010

by:


Materials arrived as described. Shipping was quick and packaged well. 380454



- UF17-943010

by:


We ordered 5th wheel landing gear and controls on a Sunday night, received a call Monday first thing to verify some information, shipping confirmation by noon Monday and received the product in Edmonton, Alberta, Canada on Wednesday via UPS. I can not think of anything they could have done better on this shipment. Well Done! TY! 379149



- UF17-943010

by:


Just received, really fast shipping, haven't had time yet to mount and try out yet. But looks to be a pretty straightforward and simple process. Will update after this project is finished. 373136



- UF17-943010

by:


work great 364431


56
78
Show More Reviews

Ask the Experts about this Ultra-Fab Products Camper Jack
Do you have a question about this Camper Jack?


  • How to Pick Out RV Landing Gear that Will Bolt Up to 2011 Keystone Cougar 291RLS
  • To pick out landing gear that will bolt right up to your 2011 Keystone Cougar 291RLS will require you to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram). If that distance is 17-1/2 inches then you would want to go with a Bulldog set like the part # BD500161. The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. If your frame...
    view full answer...

  • Recommended Dual-Motor Landing Gear
  • When installing a dual motor landing gear, the follower leg no longer exists because each side leg has a motor attached and adjusted individually. We do offer landing gear sets that have dual motors. I recommend the Ultra-Fab Deluxe Electric Landing Gear Set, part # UF17-943010. This system has a lift capacity of 12,000 lbs with a 38 inch lift. each motor has its own toggle switch to make leveling the trailer that much easier. For a system that has a 10,000 lb lift capacity, I recommend...
    view full answer...

  • Replacement Landing Gear Legs for a 2002 Fleetwood Terry 5th Wheel Trailer
  • How are you measuring the weld stops on the landing gear legs, inside to inside A), outside to outside B), or center to center? If the outer tube C) on your existing landing gear leg measures 33-1/2" long then the inside to inside measurement should be 19-1/2" and the outside to outside measurement should be 21-1/2". If this is the case then you will want to use the Stromberg Carlson Electric Landing Gear Set part # LG-4. If your weld stops do not match the above then it is not a common...
    view full answer...

  • Recommended Replacement Landing Gear for 40 Foot Haulmark Gooseneck Triple Axle Trailer
  • For your 1989 Haulmark 40 foot gooseneck toy hauler, I recommend the Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010 or the Bulldog Tandem Landing Gear Set # BD500161 depending on the brackets that are on your current landing gear. The Ultra-Fab set is a fit for frame clamps that are 20-1/4 inches apart where the Bulldog set is 17-1/2 inches apart.
    view full answer...

  • Dimensions of the Square Tube on the Ultra-Fab Deluxe Electric Landing Gear Set
  • The square tube on the Ultra-Fab Deluxe Electric Landing Gear Set, # UF17-943010, measures 2-1/2 inches x 2-1/2 inches and it measures 24-1/4 inches tall. The foot plate measures 8 inches long x 5-3/4 inches wide. I have attached a photo showing these dimensions.
    view full answer...

  • Dual Motor Landing Gear System For 1995 KZ Sportsmen 2200
  • First things first. . . thank you for your service. I am happy to help you obey the unofficial retirement rules and help you find the proper system. We only have a few to choose from that are dual motor. We have the Bulldog Electric 5th Wheel Landing Gear Set - 36" Travel - 10,000 lbs # BD500161 and the Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010. Neither of these options fit the exact dimensions you mentioned on your 1995 KZ Sportsmen 2200 (and...
    view full answer...

  • Electric Trailer Jack Recommendation for Gooseneck Horse Trailer with Full Living Quarters
  • In order to equip your horse trailer with a powered jack, I would start off by determining if you can add a powered kit to your current landing gear. These kits, like the Bulldog Powered-Drive Kit, # BD1824200100, are brand and model/capacity specific so I would need to know what landing gear is currently on your trailer in order to see if we have a kit available. My next recommendation would be to take a look at the Ultra-Fab Deluxe Electric Landing Gear Set, # UF17-943010. This is...
    view full answer...

  • Recommend Electric Landing Gear For 26 Foot Gooseneck Trailer
  • Yes, checkout the Ultra-Fab Deluxe Electric Landing Gear Set, part # UF17-943010. This electric landing gear set will bolt to the frame of your gooseneck trailer. The combined weight capacity of the # UF17-943010, is 12,000 lbs. For a non-electric landing gear set, we have the Bulldog 2-Speed Tandem Landing Gear Set, part # BD500153. The Bulldog landing gear is a weld-on application, and you will also need to have a connecting rod fabricated to connect both jacks. I would recommend having...
    view full answer...

  • Landing Gear Recommendation for a Heavy Toy Hauler Fifth Wheel
  • Sounds like your 2007 33 ft. Weekend Warrior 5th wheel toy hauler is pretty heavy if it has caused the landing gear of your trailer to fail twice so far. Between the Bulldog Landing Gear part # BD500161 and # UF17-943010 that you referenced I would go with the Ultra Fab as it has a 12k capacity and the Bulldog has a 10k capacity. Also the Ultra Fab has more positive reviews from the customers we have that have used them. The Ultra Fab set will require you to weld on new mounting...
    view full answer...

  • Comparing Ultra-Fab Replacement Landing Gear Motor/Gear Assemblies UF39-750009 & UF17-750007-003
  • The two Ultra-Fab replacement motor and gear box assemblies you referenced, parts # UF39-750009 and # UF17-750007-003, are indeed very similar. These parts differ in their intended use. Part # UF39-750009 is intended for use on the Power Twin II Electric Stabilizers # UF39-941705 and # UF39-941707. Part # UF17-750007-003 is intended for use on their landing gear set # UF17-943010. The motor portions of these products are the same, according to my contact at Ultra-Fab, but the gear box...
    view full answer...

  • Can a Single Motor Venture Landing Gear Set be Converted to a Dual Motor System
  • To make the single motor landing gear into a dual-powered landing gear you will need to replace the existing follower leg with a lead leg # LC119102, add a new gear box LC276602, motor # LC142178, and switch # LC145236. It would be easier and cost less to just replace the whole system with a dual motor system such as # UF17-943010 rated for 12,000 pounds.
    view full answer...

  • How to Measure to Pick Out Replacement Landing Gear for a Trailer
  • The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it is 17-1/2 inches then the # LC333964 would fit. If your frame clamps are instead 20-1/4 inches the Ultra Fab part # UF17-943010 would be a direct replacement. Since you gave from inside to inside you would just need to remeasure.
    view full answer...

  • Landing Gear on Keystone Raptor Slips and Has Trouble Raising the Trailer
  • The first thing I would check is the condition of the battery that powers the landing gear on your trailer. If the battery is starting to go or doesn't have enough charge then the first step I recommend is replacing the batter or charging it with an AC charger than also can recondition it such as # CTEK56158. If the landing gear still seams to struggle then changing out the motor could help, especially if the landing gear was working fine up until you started having issues. But if...
    view full answer...

  • Replacement 5th Wheel Landing Gear for 2006 Weekend Warrior 35-Foot 5th Wheel
  • When it comes to jacks, winches or landing gear we suggest choosing a product with more lifting capacity than you need. In the case of 5th wheel landing gear the extra capacity means the jacks will have to work less hard to do their lifting and may have a longer working lifespan as a result of not being operated near their limit. The Ultra-Fab landing gear you referenced, part # UF17-943010, have a high 12K lift rating, a 38-inch lift height and a travel rate of 15 seconds per inch....
    view full answer...

  • Replacement Landing Gear for Old Lippert Landing Gear System on a 5th Wheel Trailer
  • It is probably the lack of use that is the most damaging to something like electric landing gear on a 5th wheel trailer. Things could seize up or corrode when not in use. You would probably be able to identify problems sooner as well. But either way it is sounding like replacing the landing gear is the way to go for your trailer. If you are able to have a system with motors mounted on the top then I recommend the Ultra-Fab system # UF17-943010. This is a dual motor set up rated for...
    view full answer...

  • How to Pick Out Landing Gear for Trailer, Bulldog or Ultra Fab
  • In order to pick out a direct replacement for the landing gear on your 2007 Desert Fox 38U we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...

  • Recommended High-Capacity Electric 5th Wheel Landing Gear for Fastest Operation
  • Between the 12K-rated Ultra-Fab Deluxe Electric Landing Gear # UF17-943010 and the 10K-rated Bulldog Electric 5th Wheel Landing Gear # BD500161 the Bulldog offers the faster leg travel, 9-inches per minute. The Ultra-Fab operates at less than half that speed, 4-inches per minute. Both of these jack kits include wiring and switches.
    view full answer...

  • Replacement Electric Landing Gear for Horse Trailer
  • Sorry to hear your system broke and there aren't replacement parts available for your horse trailer. The Bulldog Velocity Series Electric Landing Gear Jack - 24" Lift - 12,000 lbs # BD185400 is a good replacement for your discontinued and broken system. It will simply bolt right on to your trailer so it can utilize the 12V power you already have run. It is able to lift 12,000 lbs and lifts 20 inches in 60 seconds. Another great option for you is the Bulldog Square Jack - Drop Leg...
    view full answer...

  • Replacement 5th Wheel Trailer Landing Gear
  • Your part 125340 refers to a Stromberg Carlson landing gear kit. In case you want to service this unit we do offer the replacement motor # LG-142178 and replacement gear box # LG-179015. For an upgrade I suggest the dual-motor 12K-rated Ultra-Fab kit # UF17-943010 or the similar 10K-rated Bulldog # BD500161. Both provide 36-inches or more of lift. A highly-rated dual-motor system will work with less strain and should provide trouble-free service for a long time.
    view full answer...

  • Converting Single Motor Stromberg Carlson Landing Gear to a Dual Motor Set Up
  • To upgrade a single motor Stromberg Carlson landing gear set to dual motors, you would need a replacement lead leg, # LG-179013 (the two legs would not be attached to each other in a dual motor set up), a gear box, # LG-179015, and the motor, # LG-217884. With all that you start getting close to the price of a complete kit with dual motors such as # UF17-943010.
    view full answer...

  • Troubleshooting Landing Gear Issue On 2008 Weekend Warrior LED 3505
  • It does sound like you have isolated the issue indirectly. If you can move everything manually without issue, then the screws in the legs are fine. The gearbox works fine under manual load, so gears are fine, and motor seems to work fine, so the issue most likely isn't your landing gear. The issue could be a weak battery. I recommend testing your battery to make sure it is charged. The 3:1 ratio is standard on landing gear but you can upgrade the motor speed for faster lift using...
    view full answer...

  • Dimensions and Specifications for Ultra-Fab Deluxe Electric Landing Gear Set
  • I am not sure which dimensions you need. We have a picture that shows the dimensions on the product page. It is the very last thumbnail right next to the main picture. And the instructions are linked on the page, right hand side with even more information. If what you are looking for is not available in either of those places let me know what you need and I can get it on the page for you! I have also included the instruction link here, to the right, and the picture I mentioned.
    view full answer...

  • Is Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 Suitable for Heavy Equipment Gooseneck
  • The Ultra-Fab Deluxe Electric Landing Gear Set you referenced, part # UF17-943010, is suitable for use on both 5th wheel and goose neck trailers. This dual motor landing gear set has a combined capacity of 12,000-lbs so it will work fine on your goose neck as long as its fully-loaded pin weight does not exceed this 12K rating. Installation consists of welding on the hangers to the front of the trailer frame (below the overhang). You will want a certified welder to do this. Then you will...
    view full answer...

  • Powered Landing Gear Recommendation to Replace a Ram Trailer Jack
  • I have a solution that would work for you, but there are no jack powered drive kits we carry that are confirmed to work on your Ram trailer jack. The best recommendation I could make for you would be to get the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 to replace the jack you have on your trailer. This comes with a 3 year warranty. None of the kits we offer have a lockable remote though. You could hide the switches of this jack if you wanted to make it difficult for someone...
    view full answer...

  • Will Ultra-Fab Landing Gear Fit a 2008 Weekend Warrior 5th Wheel Trailer
  • There may be s ticker or something in the literature for the trailer that states the capacity of the existing landing gear. You would want to match or exceed that capacity with the new landing gear. Provided the frame has steel vertical frame members, most likely it does and that is where the old landing gear is attached, you will attach Ultra-Fab landing gear # UF17-943010 in the same places. The brackets that attach to the trailer will need to be welded on. Welding should be done by a...
    view full answer...

  • 1996 Carri Lite Landing Gear Replacement Availability
  • In order to pick out a direct replacement for the landing gear on your 1996 Carri-Lite 633RKS we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...

  • Distance from the Top of Top Welded Tab to Bottom of Bottom tab on Ultra Fab Deluxe Landing Gear
  • The distance from the top of the top welded tab to the bottom of the bottom welded tab on the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 is 21-1/8 inches.
    view full answer...


Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Michael L
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Adele M
Expert Research:
Adam R
Updated by:
Laura H
Installed by:
Cole B
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Photos by:
Zach O
Updated by:
Sarah W
Expert Research:
Victoria B
Updated by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.