View Cart
Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs

Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs

Item # LG-183708

lowest price pledge

Retail:$368.31

Our Price: $322.42

You Save: $45.89
Camper Jack

This item qualifies for Free Shipping

Shipping Weight: 71 lbs

Quantity: 
In Stock
Camper Jack LG-183708 - Sidewind Jack - Stromberg Carlson
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Landing Gear
  • 8000 lbs
  • Sidewind Jack
  • Stromberg Carlson
  • 37 Inch Lift
  • Weld-On
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs. Call 800-298-8924 to order Stromberg Carlson camper jack part number LG-183708 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs. Camper Jack reviews from real customers.


  • All Info
  • Reviews (27)
  • Q & A (62)
  • Photos
  • Why etrailer?

Stromberg Carlson Camper Jack - LG-183708

Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs.


Features:

  • Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV
  • Manual lift with included crank is easy and quick
    • Motor and switch kit (LG-217884 - sold separately) can be added to eliminate manual cranking
  • Drop legs minimize jacking time and help to level the trailer on uneven ground
    • Legs adjust in 1" increments
  • Cage pins included to release drop legs
    • Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release
  • Heavy-duty steel construction
  • Gearbox housed in a corrosion-resistant aluminum body
  • Landing gear welds onto trailer frame
  • Set includes 2 jacks, gearbox, hand crank, footplates, cross shaft, and hardware
  • Made in the USA


Specs:

  • Leg length: 29-1/2"
  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Combined weight capacity: 8,000 lbs
  • Cross shaft length: 41" - 71"
  • Overall dimensions: 32-3/4" tall x 2-1/2" wide
  • Footplate dimensions: 8" long x 5" wide x 2" tall
  • 1-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.


Convenience is a hallmark of this landing gear from Stromberg Carlson. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.


This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.



LG-183708 Stromberg Carlson Manual Landing Gear for Fifth Wheel



LG-183708 Installation InstructionsInstallation Details LG-183708 Installation instructions



Customer Reviews

Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs - LG-183708

Average Customer Rating:  4.9 out of 5 stars   (27 Customer Reviews)

Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs.

- LG-183708
by:

This landing gear is a great replacement for my 25 year old unknown make landing gear. I did have to relocate the mounts in order to accommodate the manual crank feature ( a feature I have never had to use, but take comfort in knowing it's available if the need arises.) The kit was so complete it was not hard to relocate them, up 3/4" and back 1/4". As long as I was welding, I was able to fabricate a mount for my existing motor, allowing me to continue "crankless operation." My only complaint was the directions regarding the plastic spacer that holds the gear box in place. The directions stated the spacer was on the lead leg's "rotor", with no explanation of what the rotor is. I would have called it the "input shaft," or better yet provided a photo. The directions said to see the photo below, but there was no such photo below. The only photo related to the spacer was a postage stamp sized image which was too small to glean any detail from. I found the spacer in the hardware bag, along with a self-tapping screw that aligned with the hole in the "rotor" and figured out how to install the spacer. It's taking longer for me to type this than it did to figure it out, but it should have been clearer. I'm about to run out of room, so in summation, It's a GREAT product! 589420



- LG-183708
by:

Placed my order online was notified the next day that parts were out of stock and backordered until the first of the year . They went to work and found me the parts i needed and had them in my possession by weeks end Thanks and Great Service !!! Ps. They fit like a glove 570246



- LG-183708
by:

The landing legs were delivered yesterday the 28th as promised. They were what I was expecting. I installed them soon after arrival. Thank you. 559400



- LG-183708
by:

Easy install and great price. 312381


Comments

Still working great!

Mario P - 10/31/2017

30229

- LG-183708
by:

I called and talked to Jennifer S. on Monday, She was very helpful and her knowledge of the product was great. She helped me order the correct landing gear and I received it on Wednesday. I installed the new landing and all fit well and works great. The price was the best I could find and the service was great. All this and free shipping. Thanks to Jennifer for her help. 357661



- LG-183708
by:

Fast delivery and just as pictured on their site. Needed a front trailer jack for my 5th wheel and they had just what I needed. Very polite on the phone and very helpful. Was very easy to install even for an old man that is not to good with things like this. 280156



- LG-183708
by:

The Stromberg Carlson manual landing gear that I ordered arrived on time and as advertised. Within an hour I had the old landing gear removed and new one installed. It worked great and matched up perfectly with our existing motor. No photo was taken due to the limited view. The salesperson was great to work with... 382812



- LG-183708
by:

Went in pretty easy. Took about 2 1/2 hours. I was able to use my existing mounts but one of the mounts was off just enough to make me cus. After a little grinding everything went together pretty easy. I would suggest replacing the carriage bolt nuts with locking nuts. 394577



- LG-183708
by:

After stripping the gears out of the landing gear on my 5th wheel camper, I went online and found out that Atwood no longer supplies jacks for campers. I contacted Etrailer Corp. and they found replacement jacks for me. When the new jacks arrived, they bolted up easily and everything fit as it was supposed to. Etrailer was very nice to work with, shipped the product very quickly, and is an excellent vendor. Thank you. 573702



- LG-183708
by:

Product arrived on time, the Lift is the exact same for my 1998 Prowler 5th wheel. Easy to install instructions Thanks etrailer 538787



- LG-183708
by:

Arrived a day early i installed it in 20min it was a perfect fit and fit and operated great. Very knowledgeable service and better tha original parts at great price.I would recommend etrailer for anyone needing parts for rv repairs. 525659



- LG-183708
by:

I received the product ahead of time and I installed it and it works perfectly. Great product and at a great price. Thank you. 525577



- LG-183708
by:

I replaced everthing in about 1 1/2 hrs while camping easy job thank you 523087



- LG-183708
by:

Great service, fast delivery, Very happy with order. 491109



- LG-183708
by:

Lisa really helped with selecting a set of landing gear with the correct weld stop spacing for my application. She found me a heavier set than oem that fit perfectly and worked with my power drive. I have always been impressed with the customer service I receive from etrailer. 484926


Comments

Still working great

Daniel O - 03/14/2019

50520

- LG-183708
by:

Product was delivered the following day after ordering arrived in excellent condition and very pleased with what I ordered and what I received good job etrailer 432064



- LG-183708
by:

Will definitely order from etrailer.com again. Very well satisfied. 413501



- LG-183708
by:

it worked 410368



- LG-183708
by:

Excellent product, well made, smooth working, easy to install. Leeza J was a GREAT Help finding the equipment I needed. I have ordered several different times from etrailer. People are very helpful and all products have been great. Thanks 407363



- LG-183708
by:

Great replacement jack; simple to insta ll! 339802


Comments

The jack legs are great. Never a problem!

Garry V - 02/08/2018

34410

- LG-183708
by:

work really nice and smooth. also have a really nice wide footpad 275680



- LG-183708
by:

Easily installed and performs well! This landing gear replaced the original landing gear of my camper. 263765



- LG-183708
by:

Shipping was super fast and everything worked great. Will buy from here again. Thanks 174993



- LG-183708
by:

your counter help was very nowledged on what i needed, the item was great duality, thx for the help 172967



- LG-183708
by:

These were used on my 1997 travel trailer. They are considerably stronger than the set I removed and bolted direct into the original mounts. Would definitely recommend to anyone needing a replacement set. 146096



- LG-183708
by:

Very well built. Easy to install. Just follow instructions. Recomend highly. 107057



- LG-183708
by:

Equipment worked out great and the customer support folks were very helpful. 37441


27
27

Ask the Experts about this Stromberg Carlson Camper Jack
Do you have a question about this Camper Jack?


  • Replacement Landing Gear Drive Leg for a 5th Wheel Trailer
  • Replacement landing gear leg # LG-179013 fits landing gear set # LG-1 and # LG-183708. The size of 5th wheel trailer landing gear is pretty much all the same. Some install differently than others. This particular type requires brackets welded directly to the trailer frame like in the picture I included. A set like # BD500161 on the other hand has brackets that get welded to the frame. If you are unsure of the brand you have it is possible that if you get a replacement leg of a different...
    view full answer...

  • Stromberg-Carlson Replacement Follow Jack for 5th Wheel Landing Gear Models LG-1 and LG-183708
  • The Stromberg-Carlson Replacement Follow Jack for 5th Wheel Landing Gear, part # LG-179014, is a replacement for the non-driven side of the # LG-1 powered landing gear and # LG-183708 manual landing gear. Both of these landing gear products use weld-on installation and both have a 6000-lb weight rating. According to my research on the Forest River website, the Cardinal 35-foot 5th wheel trailer model 3030RS has a dry tongue weight of 2,550 lbs. A set of landing gear rated for 6000 lbs...
    view full answer...

  • Replacement Leg Recommendation For Lippert Fifth Wheel Landing Gear
  • I called my contact at Lippert about the landing gear leg you mentioned you need for your fifth wheel. The inner leg is not available as a separate item, but we do offer the replacement leg that will work for you if the outer leg measures 33-1/2 inches. If you need the lead leg for your landing gear you need part # LG-177202. If it is the follow leg you need to replace then you can order part # LG-177201. If you measure the outer leg of your landing gear and it measures 29-1/2...
    view full answer...

  • Replacement Landing Gear for 2011 Palomino Sabre 31 RETS
  • Your 2011 Palomino Sabre 31 RETS has Venture landing gear on it currently so to replace what you have you'd want the Stomberg Landing Gear part # LG-1 for a powered set of landing gear or part # LG-183708 if you'd prefer a manually operated set. Based on what you described your current set is damaged to the point of needing replaced.
    view full answer...

  • What Landing Gear Will Fit 1996 Avion 5th Wheel Trailer
  • I have a solution for your 1996 Avion 5th wheel, however, it is not as simple as getting two new legs. Your Avion was manufacturered by Fleetwood and the landing gear was manufacturered by RBW. Fleetwood discontinued the Avion and RBW sold out to Al-Ko. Al-Ko decided to discontinue the landing gear and sold the rights to Atwood Mobile. Atwood Mobile decided to not produce the original RBW landing gear. however, to make a long story short, after my research I have found a way for you...
    view full answer...

  • Troubleshooting Landing Gear That Stopped Moving
  • If your landing gear is motorized, the motor works fine and the gear looks good you will want to test the switch; use a 12V battery to get power to the wire that signals the gear to extend. If it does extend with the 12V battery, the issue is the switch and the replacement you'd need is # LG-145236. However, if you have tried to manually operate the landing gear and cannot move it at all, then the unit would need to be replaced. For that you can use the Stromberg Carlson Electric Landing...
    view full answer...

  • Repair Kit for Lippert Components Venture Landing Gear Lead Leg
  • We do offer a lead leg repair kit for the Lippert Components Venture landing gear models # LG-1 and # LG-183708 and that repair kit's part number is # LG-146059. You can view this item's contents and the selling price by clicking on the link provided.
    view full answer...

  • Replacement Lead Leg for Fifth Wheel Landing Gear
  • Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179013 is designed to be used with Stromberg Carlson models # LG-1, # LG-3 and # LG-183708 and is compatible with the majority of landing gear sets, including models by Atwood, Venture, and Lippert. If you know the manufacturer of your landing gear and it's one of the aforementioned then you have the proper replacement. I've attached a link to a video review of this product for you as well.
    view full answer...

  • Replacement Landing Gear Recommendation for Trailer with Bad Follower RBW Leg
  • I wish their was a follower leg that was universal and would fit your trailer that has RBW landing gear on it currently. Since I don't have a follower leg I can recommend the best recommendation I can give would be to replace both legs with a set like the # LG-183708.
    view full answer...

  • Replacement Landing Gear Follower Leg for a 2010 Montana 5th Wheel Trailer
  • The Stromberg Carlson replacement follower leg, # LG-179014, is designed as a replacement for landing gear # LG-1 and # LG-183708. But also works with most other brands including Atwood, Lippert, and Venture. It is very likely this leg will work with your landing gear.
    view full answer...

  • Repair Kit and Replacement Follow Leg for Stromberg Carlson 5th Wheel Landing Gear
  • Trailer makers rarely keep records of smaller items like the landing gear and stabilizers they install on their trailers but if you can confirm the landing gear is from Stromberg Carlson and is either their model # LG-1 or model # LG-183708 then kit # LG-146060 is the correct part. Both the powered # LG-1 and the manual # LG-183708 provide the same 34-7/8-inches of lift. You can compare your follow leg dimensions to confirm compatibility. Both landing gear sets have a leg length of 29-1/2-inches....
    view full answer...

  • How to Determine Lead Jack For 2004 Thor Wanderer 365WTB
  • Normally, you will be able to find the make and model information directly on top of the jack or landing gear. If not there it may be near the bottom of the outer tube. Another place to check out would be on or inside the housing that the gears are in. If you cannot find it in any of these places, it may be in the owners manual for the fifth wheel. The Lead Jack Repair Kit, part # LG-146059 is designed for Stromberg Carlson Trailer Jack part # LG-1 or part # LG-183708 landing gear.
    view full answer...

  • Replacement 5th Wheel Landing Gear for 1999 Fleetwood Terry 5th Wheel
  • We can help you with new landing gear for your 1999 Fleetwood Terry 5th wheel. According to my research the 28-foot M-27 5K weighs about 6500-lbs dry. For cost effective manual landing gear you can use the Stromberg Carlson kit # LG-183708 or for a 12V powered set their # LG-1. You will want to match up the length of the outer tube and the lift height of your existing landing gear to ensure the new one provides the same fit and lift. The linked page will display for you all landing...
    view full answer...

  • Troubleshooting Lippert Follow 5th Wheel RV Landing Gear with Possible Broken Shaft
  • I spoke with my contact at Lippert and he said it sounded like you have a broken shaft and you will need a replacement follow landing leg and snap pin. The Stromberg Carlson replacement follower leg, # LG-179014, is designed as a replacement for landing gear # LG-1 and # LG-183708. But also works with most other brands including Atwood, Lippert, and Venture. It is very likely this leg will work with your landing gear.
    view full answer...

  • Recommended Manual Landing Gear Set For 1998 Salem Fifth Wheel Trailer
  • We have a couple landing gear sets that may work well for you. One of the sets we offer is the Bulldog Tandem Landing Gear Set, part # BD500162. This set features an 18 inch drop leg and coupled with the 18 inches of lift gives you 36 inches of total travel. This set comes with 8 inch X 6 inch footplates. This set has a weight capacity of 8,000 lbs. The other landing gear I recommend is the Stromberg Carlson Manual Landing Gear, part # LG-183708. This has a 6,000 lb weight capacity...
    view full answer...

  • Replacement Gearbox for Venture 940 Trailer Landing Gear
  • If your Venture landing gear was made by Lippert Components (which it should be) and the landing gear style is the same as or similar to # LG-183708 then yes, you can use the Replacement Aluminum Gearbox # LG-179015. If it is a different design or not made by Lippert then it will not be a fit.
    view full answer...

  • Replacement Landing Gear Set Recommendation for 2007 Keystone Cougar
  • A Keystone Cougar would use the standard style of landing gear unlike the Montana which uses a unique style. For a powered set that will fit your trailer and work well we have the Stromberg Powered Landing Gear part # LG-1 or for the non-powered kit that will cost a bit less we have the part # LG-183708 which will require you to crank the jacks by hand. The # LG-1 will raise and lower as you hold down the corresponding button.
    view full answer...

  • Which Side Is The Lead Leg For The Landing Gear On 2008 Montana Trailer
  • The lead leg of a landing gear for a trailer is typically on the driver's side of the trailer, so it would be on the left side when looking at the trailer from the rear. The easiest way to tell is to open the access door for the landing gear and see which gear has the motor or gear box attached at the top of the landing gear. check out the attached photo that shows what the lead leg would look like for a manual landing gear system like part # LG-183708. For a landing gear system...
    view full answer...

  • Replacement Gear Box Recommendation for a Venture Landing Gear Set
  • Most likely you have the Stromberg Carlson Landing Gear Set part # LG-183708. Which if you do the correct replacement gearbox would be the part # LG-179015.
    view full answer...

  • Replacement Lead Landing Gear Leg for Unknown Landing Gear Brand on a 5th Wheel Trailer
  • Many of the landing gear sets are either made by Lippert or otherwise have some interchangeable parts. However, a different lead leg could be geared different and cause uneven lift. So even though a different lead leg may work with the follower leg, and vice versa, I do not advise mixing brands. If you do happen to have the follower leg # LG-179014 then the correct replacement lead is # LG-179013. Otherwise I recommend replacing the landing gear with # LG-183708 which has as 6,000 pound...
    view full answer...

  • Atwood Landing Gear Motor Compatibility with Stromberg Carlson Landing Gear Set
  • The Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs # LG-183708 will allow you to use your Atwood landing gear motor. You may be interested in the spring mounted pull pins # LG-119113 to make leveling faster and easier with this system.
    view full answer...

  • Replacement Lead Leg for Landing Gear on 27-Ft Ragen 5th Wheel Toy Hauler
  • Many landing gear brands/sets and replacement parts are interchangeable but a great way to find correct parts such as a lead leg is to locate the part number from the existing item. Most Atwood, Lippert and Stromberg Carlson landing gear can use common replacement parts. For example, part # LG-179013 is a replacement lead leg assembly that fits Stromberg Carlson LG-1 or LG-183708 landing gear as well as most Atwood and Lippert units. If you cannot find brand or part numbers on the existing...
    view full answer...

  • Recommended Replacement Landing Gear For 2010 Sunnybrook Bristol Bay 3510 Re
  • For your replacement landing gear on a 2010 Sunnybrook Bristol Bay 3510RE, I recommend the Replacement Landing Gear # LG-183708. The size of 5th wheel trailer landing gear is pretty much all the same but the capacities vary a little and some install differently than others. This particular type requires brackets welded directly to the trailer frame like in the picture I included. It is wise to replace your motor at the same time simply because you will already be working in that area....
    view full answer...

  • How To Determine What Brand Landing Gear Is On 2007 Montana Mountaineer Fifth Wheel
  • Normally, you will be able to find the make and model information directly on top of the jack or landing gear. If not there it may be near the bottom of the outer tube. Another place to check out would be on or inside the housing that the gears are in. If you cannot find it in any of these places, it may be in the owners manual for the fifth wheel. The Lead Jack Repair Kit, part # LG-146059 is designed for Stromberg Carlson Trailer Jack part # LG-1 or part # LG-183708 landing gear.
    view full answer...

  • Replacement Landing Gear for Frame Clamps That Measure 18-1/2 Inches Apart
  • If you have measured your landing gear like in the accompanying diagram and the frame clamps are 18-1/2 inches apart you have an uncommon spacing; you can use the Landing Gear Set # LG-183708 but would need to have a welder come in and remove your current brackets and weld new ones on that are the appropriate length. The probable reason you have uncommon spacing between your brackets is the landing gear on your Avion Savannah was likely made by RBW some years ago and they are no longer...
    view full answer...


Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924