1. Camper Jack
  2. Stromberg Carlson
  3. Landing Gear
  4. 5500 lbs
  5. Electric Jack
  6. 35 Inch Lift
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs

Item # LG-1
lowest price pledge
Retail:$475.95
Our Price: $431.76
You Save: $44.19
Camper Jack
This item qualifies for Free Shipping
Shipping Weight: 76 lbs
Quantity: 
In Stock
LG-1 - Weld-On Stromberg Carlson Landing Gear
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K. Call 800-298-8924 to order Stromberg Carlson camper jack part number LG-1 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs. Camper Jack reviews from real customers.
  • All Info
  • Reviews (50)
  • Q & A (148)
  • Videos (2)
  • Photos
  • Why etrailer?

Stromberg Carlson Camper Jack - LG-1

  • Landing Gear
  • 5500 lbs
  • Electric Jack
  • Stromberg Carlson
  • 35 Inch Lift
  • Weld-On

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.


Features:

  • Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV
  • Electric-powered adjustment for easy operation
  • Single-speed motor won't trip circuits or cause problems with coach's electrical systems
    • IP-rated switch will not spark, so it can be mounted safely in bottle-gas area
  • Drop legs minimize jacking time and help to level the trailer on uneven ground
    • Legs adjust in 1" increments
  • Cage pins included to release drop legs
    • Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release
  • Hand crank included for manual operation
  • Heavy-duty steel construction
  • Gearbox is housed in a corrosion-resistant aluminum body
  • Landing gear welds onto trailer frame
  • Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware
  • Made in the USA


Specs:

  • Leg length: 29-1/2"
  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Combined weight capacity: 5,500 lbs
  • Cross shaft length: 41" - 71"
  • Footplate dimensions: 8" long x 5" wide x 2" tall
  • Outer tube width: 2-1/2"
  • 1-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.


Stromberg Carlson's landing gear was designed with safety in mind. The motor, manufactured by Lippert, won't trip circuits or cause problems with the coach's electrical systems. In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area.


Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.


This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.



LG-1 Stromberg Carlson Deluxe Electric Landing Gear for Fifth Wheel



LG-1 Installation InstructionsInstallation Details LG-1 Installation instructions



Video of Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Stromberg Carlson Camper Jack - Landing Gear - LG-1 Review

Today we're going to be taking a look at the Strongberg-Carlson Electric Landing Gear. The landing gear can support up to 5500lbs. It's also going to feature an IP-rated switch that's going to feature safe operation. This set is going to be perfect for fifth-wheel campers. It's going to feature electric powered adjustment for easy operation. You've got the motor right here.

This right here is that IP-rated switch I was talking about. It's going to allow you to extend and retract the 30 amp fuses included, and it's got the wiring that can easily get connected to the motor and the power source to operate the extending and retracting functions of the jack itself. Really nice design. It's going to feature the single speed Lipert motor. That's going to have built-in safety features.

The motor won't trip circuits or cause problems with the coach's electrical systems. Again, the IP-rated switch is designed so it won't spark. That way, it can be mounted safely in the bottle gas area. The unit on each support leg is going to contain a drop leg. That's really going to help minimize the amount of jacking and amount of time it takes to jack.

It's going to help to level the trailer even on an uneven ground. The legs will adjust in increments of 1". It's going to feature the cage pins. Those are included to release the drop legs, and the total drop leg travel on each side is going to be 16". Plenty of versatility there when it comes to getting those out to where you need it. This piece right back here, this is going to be our crank handle, so it does have the manual option available with the crank handle.

That is included for manual operation. The unit's going to be constructed of heavy-duty steel. Really nice, strong dependable construction. The gearbox, which is located on this side over here by the motor. The gear box is going to be housed in a corrosion-resistant aluminum body. One of the things I want to mention too is that the gear box is going to have multiple stops, and can be fitted to the lead leg according to a position that would best work for your particular application. You can see that I have it mounted vertically which puts the motor on top, but again that can be rotated to best fit your application. The landing gear is designed to weld onto the trailer frame. The set is going to include 2 jacks. It's going to include your gear box, your motor, your switch. It's going to have the foot plates. They're on the base of the landing gear. It's going to have the telescoping cross-shaft. It's going to have the hand crank, and it's going to include your weld brackets. Two for each side. That way you can easily get it welded on. We do recommend that welding is done by a professional. It's going to come with all necessary hardware as well as installation and operation instructions. The amount of lift that this unit's going to offer is going to be 21" from the welding point. The cross-shaft, it does have a telescoping design. That way the length can adjust from 41" to 71". When it comes to the foot pads, that's going to be these pieces down here. Really nice large design, so that way they really help distribute the weight that's applied to the unit. Those foot pads are going to measure 8" by 5" wide. The tube, the outer tube right here, that's going to give us a square design and that's going to measure 2 1/2" by 2 1/2". Please keep in mind that the landing gear is designed to stabilize a portion of your trailer's weight. It's not intended to support the full gross vehicle weight rating of your trailer. You want to be careful not to use your landing gear in a way that would lift your trailer or RV, especially during tire changes or service work. You want to make sure that you don't exceed the capacity of the landing legs. This system and its parts are designed to be compatible with most of the other fifth wheel landing gear that's out on the market including Atwood and Lippert, so if you're replacing your old landing gear, you can install this set from Stongberg-Carlson using your existing mounting hardware. That's going to do it for today's review of the Strongberg-Carlson Electric Landing Gear Set.


Customer Reviews

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs - LG-1

Average Customer Rating:  4.7 out of 5 stars   (50 Customer Reviews)

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.

- LG-1
by:

The folks at etrailer were great to work with an the product was exactly what I needed to get me up and running again. I had the pleasure of emailing Jameson when I first started to find the product that would suit my needs. Jameson was prompt with his replies was spot on to the product that I needed to order to complete my project. When I received the product is was exactly as advertised. It was easy to install and all the parts were there that were needed to complete the job. Great Job etrailer team!! Thanks, Alan 580184



- LG-1
by:

Arrived a day or two earlier than expected. Almost identical to original equipment I had on my keystone Laredo 2009. Old gear was very easy to remove. New gear installed easily. Took about two hours with just socket wrenches and basic hand tools. Installed it at a campground. The only reason I didn't give a five star review is that the kit didn't include new feet as advertised...I just used the old ones. I think this gear is just fine, so long as you get in the habit of chocking the wheels when connecting or disconnecting. Pushing or pulling the trailer with the feet on the ground bends the legs and then the motor overloads. 345791



- LG-1
by:

Great!!!’ Landing gear Installation went very smooth! etrailer customer service... is~2nd to none! 504083



- LG-1
by:

They where easy to install no hassle 677720



- LG-1
by:

This product was as described and had fast shipping as always when dealing with etrailer. It has been 1 year since we ordered this and the Jack works great. I would recommend etrailer to anyone needing anything that this company sells. They have wonderful customer service and make sure you are 100% satisfied with any item. 674651



- LG-1
by:

After one year these landing gears still worked perfectly 662104



- LG-1
by:

Awesome .. the jacks on my weekend warrior jacks were undersized from the factory... these Jack lift with no problem... very happy ! 615093



- LG-1
by:

Really won’t be able to say to much till I get them in and working. I’m replacing Atwood’s that are no longer available. But got them in excellent time. Thank you. 608571



- LG-1
by:

Exactly what I expected. Parts arrived not damaged in a timely manner. 583164



- LG-1
by:

This was purchased as a compromise. An exact fit was impossible to find since Lippert discontinued Atwood landing gears. A set including motor was ordered since it could not be determined if the old motor would fit the new legs. As it turns out the old motor fits and works far better than the new one. The legs are not really long enough but can be used if not fully retracted. Not completely satisfactory but we are working around the problems. Cathy T. was very helpful. I just wish she had a more appropriate set. 570321



- LG-1
by:

Had a challenge with parts at first. Etrailer fixed it with no problems. The jacks Still work great. 551501



- LG-1
by:

These have worked flawlessly and I appreciate your followup. Your site is easy to navigate. Thank you 547071



- LG-1
by:

Very impressed with these Jack's. They operate twice as fast as the Jack's I replaced. 522336



- LG-1
by:

Good quality product. Fast shipping 512065



- LG-1
by:

The product was easy to install and operates fine. 499506



- LG-1
by:

Quick delivery, good product, reasonably priced. Would buy here again. 488745


Comments
Working fine. No problems after one year
Randy - 03/24/2019

50932

- LG-1
by:

EXCELLENT QUALITY AND EASY TO INSTALL.......THIS IS AN EXCELLENT CO. TO PURCHASE FROM. 475936



- LG-1
by:

Every thing fit and worked well fast de livery 444220



- LG-1
by:

Ease of instalation was the best! 443975



- LG-1
by:

etrailer is top notch. Smooth transaction and quick shipping. 434511



- LG-1
by:

Received package when I was supposed too all the parts were there I'm very satisfied with etrailer 421354



- LG-1
by:

Thank you Shery and etrailer for reordering, at the same price, the LG-1 so it would arrive on time. It works great on my 2004 Montana. I did have a problem with lining up the the legs to the already welded on brackets, but with a minamum amount of ajustment (some filing of bolt holes and hammering on leg) I was able to secure solidly. My decision to replace the entire landing gear assembly in stead of just the broken lead leg was based on the age of my RV and the cost to do so (it was a great price). I will continue to use your service in the future and reccomend it to anyone I can. Thanks again for the great service. 417180



- LG-1
by:

Very easy to install went right on where old ones were and simple to install. For power I just ran a pigtail to the pickup so you will always have power. 408748



- LG-1
by:

Bill was a great help finding this landing gear to fit my 5th wheel, my old unit was discontinued, this unit fit perfect 408589



- LG-1
by:

Installed in about an hour. Fairly simple to do. Looks like it will work just fine. Motor to drive it sounds like it may be a little weak for my application on a 30' fifth wheel though. Other than that satisfied. 406892


Comments
Working just fine still. Will outlast the trailer Im sure probably! Thanks for the great customer service and checking back dont get that from any other dealer around here!
Robert B - 07/17/2018

41089
27
52
Show More Reviews

Ask the Experts about this Stromberg Carlson Camper Jack

  • Recommended Landing Gear Motor for Fleetwood Wilderness 5th Wheel Trailer
    Atwood no longer makes the product you are seeking, so I recommend the Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs # LG-142178 as well as the gearbox # LG-179015 to make it compatible. Your other option is to update your entire system using the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1. If the brackets are in the correct locations, the exchange will be a simple bolt on. I've attached photos to assist.
    view full answer...
  • Replacement Parts for Atwood Landing Gear Legs
    In the past we have had customers use the Replacement Gearbox part # LC276602, Lead Leg Leg Repair Kit part # LC146059, and Follow Leg Repair Kit part # LC146060 on the Atwood landing gear legs with success but it would be hard for me to confirm fit without pictures and part numbers. Atwood was sold off to Lippert some time ago so direct fit parts are not always available. With that being said, I think the best option for you is a complete replacement. If you can measure the distance...
    view full answer...
  • Determining if Replacement Stromberg Carlson Landing Gear Legs Will Fit 2008 Keystone Challenger
    The Replacement Lead Leg # LG-179013 and Follow Leg # LG-179014 referenced in your question are direct replacement legs for the Stromberg Carlson # LG-1, # LG-3, and # LG-183708 Landing Gear Systems. They can also be used with many systems from Atwood, Venture, and Lippert. I am not sure of the exact system you have installed on your Keystone Challenger, so your best bet is to take a few measurements to see if these replacement legs will fit with your existing brackets. They have a...
    view full answer...
  • Repair Kit and Replacement Follow Leg for Stromberg Carlson 5th Wheel Landing Gear
    Trailer makers rarely keep records of smaller items like the landing gear and stabilizers they install on their trailers but if you can confirm the landing gear is from Stromberg Carlson and is either their model # LG-1 or model # LG-183708 then kit # LG-146060 is the correct part. Both the powered # LG-1 and the manual # LG-183708 provide the same 34-7/8-inches of lift. You can compare your follow leg dimensions to confirm compatibility. Both landing gear sets have a leg length of 29-1/2-inches....
    view full answer...
  • Replacement Landing Gear Set Recommendation for 2007 Keystone Cougar
    A Keystone Cougar would use the standard style of landing gear unlike the Montana which uses a unique style. For a powered set that will fit your trailer and work well we have the Stromberg Powered Landing Gear part # LG-1 or for the non-powered kit that will cost a bit less we have the part # LG-183708 which will require you to crank the jacks by hand. The # LG-1 will raise and lower as you hold down the corresponding button.
    view full answer...
  • Replacement Landing Gear for 2011 Palomino Sabre 31 RETS
    Your 2011 Palomino Sabre 31 RETS has Venture landing gear on it currently so to replace what you have you'd want the Stomberg Landing Gear part # LG-1 for a powered set of landing gear or part # LG-183708 if you'd prefer a manually operated set. Based on what you described your current set is damaged to the point of needing replaced.
    view full answer...
  • Troubleshooting Landing Gear That Stopped Moving
    If your landing gear is motorized, the motor works fine and the gear looks good you will want to test the switch; use a 12V battery to get power to the wire that signals the gear to extend. If it does extend with the 12V battery, the issue is the switch and the replacement you'd need is # LG-145236. However, if you have tried to manually operate the landing gear and cannot move it at all, then the unit would need to be replaced. For that you can use the Stromberg Carlson Electric Landing...
    view full answer...
  • Can the Motors of the Bulldog Landing Gear # BD500170 be Flipped
    The motors of the # BD500161 can't be inverted when installed. If space above the top of the jacks is needed a better option might be the Stromberg Carlson Landing Gear # LG-1.
    view full answer...
  • Does the Cage Pin on the 5th Wheel Landing Gear Hold the Weight of the Trailer
    Yes, the 3/8" thick cage pins on the landing gear, like the Stromberg Carlson Electric Landing Gear Set # LG-1, are the only thing that is keeping that leg from adjusting once you have them install (see attached picture). If you are worried about the weight bearing down on them you can rest assured that Stromberg Carlson has done extensive testing to make sure that it is perfectly safe to use. Keep in mind that you should have also chocked the wheels on your trailer and that the landing...
    view full answer...
  • Electric Landing Gear Replacement for 2007 Keystone Raptor 3612
    For an exact replacement to what you currently have the correct part number you need is the # LG-1. This is the exact same powered kit as what you have.
    view full answer...
  • Landing Gear Replacement for Trailer with Atwood Jacks MPD 71119
    The picture you submitted shows a standard Atwood landing gear jack set like the Stromberg Carlson kit part # LG-1. If you are wanting an exact replacement you would want the part # LG-1 as Atwood is no longer in business and this set is made to same specs.
    view full answer...
  • Could Stromberg Carlson Landing Gear Replace RBW Landing Gear on Fifth Wheel
    In order to pick out a direct replacement for the landing gear on your 1998 Carri Lite we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # LG-1. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the...
    view full answer...
  • Replacement Landing Gear with 17-1/2 Between Mounting Brackets!
    I have the perfect solution for you! The Stromberg Carlson Electric Landing Gear Set # LG-1 has the same 17-1/2" measurement between the mounting brackets and the legs measure 33-1/2"! The only thing that you need to check is the weight capacity of 5,500 lbs for the whole unit and the total lift of 34-7/8". If this lets you level your trailer then this is exactly what you need!
    view full answer...
  • Dimensions of Replacement Crank Handle # LG-119226
    The inner diameter of the Replacement Crank Handle # LG-119226 where it connects to the landing gear is 1/2" while the diameter of the outer sleeve on the landing gear end is 3/4". Please note that this is designed for use with Stromberg Carlson landing gear # LG-1, # LG-2, # LG-3, # LG-4, or # LG-183708. It can fit with a lot of other brands like Atwood or Lippert but if you don't have this landing gear just let me know what you have and I can see if we have one that is compatible with...
    view full answer...
  • Landing Gear Replacement Recommendation for 2008 Keystone Cougar
    The standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the actual legs like what you have. The etrailer Landing Gear Set, part # RVLG-8000 can be used to replace the landing gear set you have on your Keystone Cougar 2008 or the # LG-1 would work as well.
    view full answer...
  • Recommended Replacement Landing Gear For 1996 Jayco Eagle 5th Wheel Camper
    For replacement landing gear for your 1996 Jayco Eagle 5th wheel camper, I recommend the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1. This landing gear has a leg length of 29-1/2 inches with a total lift of 34-7/8 inches when using the drop leg fully. I've attached a video to assist.
    view full answer...
  • Difference Between Stromberg Carlson LG-183708 and LG-1 Fifth Wheel Landing Gear
    The two differences between the two Landing Gear kits, # LG-1 and # LG-183708 is the weight capacity, and the fact that one is powered, the other is manually operated. The LG-1 has a 5500 lb capacity and is electrically operated, while the BD500161 has an 8000 lb capacity and is manually operated with a hand crank. When mounted, either jack will have a 17-1/2 inch distance between the bottom of the upper frame clamp to the top of the lower frame clamp. The jacks do include frame clamps,...
    view full answer...
  • Stromberg Carlson Landing Gear Replacement Parts
    It sounds like you have gears in the legs that are bad or you have pins that have sheered on either end of that cross shaft. You will want the Lead Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146059 and the Follow Jack Repair Kit # LG-146060 if the gears are bad. You'll need to remove the top of the jack to see if that is the issue. You can get the entire replacement set # LG-1 if you just want to swap out everything for a new Landing Gear set.
    view full answer...
  • Recommended Replacement Landing Gear For Keystone Cougar 285 5th Wheel Trailer
    The Venture brand was made by Lippert Components, so it is very likely that a Lippert landing gear jack will work for you. Based on the weight of your trailer, you will want the # LG-1 landing gear set, but we will want to measure to be sure this is the right size for you. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located)....
    view full answer...
  • Is the Stromberg Carlson # LG-179013 the Same as the Lippert Universal Fit Lead Jack # 179013
    I spoke with my contact at Stromberg Carlson and the Replacement Lead Jack with Drop Leg, # LG-179013, is the same part as the Lippert Universal Fit Lead Landing Gear, # 179013. The only difference between the two products is that they are sold through different companies so the part numbers are slightly altered. If you were interested in a replacement follow jack with drop leg you can took at part # LG-179014 or the entire assembly is available with part # LG-1.
    view full answer...
  • Replacement Venture Landing Gear Box for VMC940RB
    For your Venture landing gear you can use # LC276602 or # LG-179015. Either one will work.
    view full answer...
  • Replacement Landing Gear for 2008 Jayco Eagle Fifth Wheel with Atwood Legs
    Since Atwood is no longer around and we can't get their replacement lead and follow jacks your best option will be to replace the entire landing gear set like with the similar # LG-1 for a powered set or part # LG-183708 for a manual set. These kits will install with the same brackets as what your trailer has currently so it will be an easy install.
    view full answer...
  • Where to Measure To Determine if Lippert Landing Gear Jack part # LG-1 Fits Trailer
    The overall dimension you are measuring is the length of the outer tube of the jack. If you check out the first picture I attached you'll see where the part # LG-1 measures 29-1/2 inches in length. The second picture I attached shows the dimensions that are relevant for mounting the jack to your trailer.
    view full answer...
  • Replacement Lead Leg for Fifth Wheel Landing Gear
    Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2" # LG-179013 is designed to be used with Stromberg Carlson models # LG-1, # LG-3 and # LG-183708 and is compatible with the majority of landing gear sets, including models by Atwood, Venture, and Lippert. If you know the manufacturer of your landing gear and it's one of the aforementioned then you have the proper replacement. I've attached a link to a video review of this product for you as well.
    view full answer...
  • Troubleshooting New Powered Landing Gear Motor that Pops and Clicks Instead of Raising/Lowering
    What you are describing means that the power and/or ground wire of your trailer isn't sufficient and the motor isn't able to function. Try making sure your battery is in good condition and is fully charged as well as make sure that the power and ground wires are connected properly as well.
    view full answer...
  • Availability of Replacement Gearbox for Atwood Landing Gear System
    I may have a solution for you, however Atwood is no longer producing landing gear products so specific replacement parts are getting harder and harder to find. We have had a few customers say that the Replacement Aluminum Gearbox # LG-179015 worked great for their Atwood landing gear system, but it has not been officially tested. Your best option may be to go with an entirely new landing gear system, since you likely won't be able to find additional replacement parts for your current...
    view full answer...
  • Powered Landing Gear Replacement Recommendation for Landing Gear with Gear Box # 125340
    What you have is a standard Lippert style of RV landing gear which we can easily match you with a replacement for. The Stromberg Powered Landing Gear part # LG-1 would fit what you have as an exact replacement and would work well.
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Shelly K
Updated by:
Sarah W
Installed by:
Cole B
Installed by:
Randy B
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924