Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2

Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2

Item # 288-01892-2

lowest price pledge

Retail:$58.27

Our Price: $53.57

You Save: 8%
Camper Jack

Orders above $99 qualify for Free Shipping

Shipping Weight: 10 lbs

Quantity: 
In Stock
Stallion Bolt-On,Weld-On Camper Jack - 288-01892-2
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Stabilizer Jack
  • Drop Leg Jack
  • Swing Down Jack
  • 1000 lbs
  • Stallion
  • 22-1/4 Inch Lift
  • Bolt-On
  • Weld-On
GMC Sierra 3500 camper jack from Stallion. Expert camper jack advice with thousands of helpful questions and answers. Stallion reviews from other Sierra 3500 owners. Guaranteed lowest price and fastest shipping.


  • All Info
  • Reviews (17)
  • Q & A (12)
  • Videos (1)
  • Photos
  • Used (1)
  • Why etrailer?

Stallion Camper Jack - 288-01892-2


Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. With 7" of drop leg travel, these jacks have an extended height of 22-1/4".


Features:

  • Stabilizing jacks help keep your trailer or camper level and steady
    • Great for loading and unloading cargo or for camping
  • Folding design lets you flip jacks up for travel, down for use
  • Drop leg extends so you can adjust the height
    • Spring-loaded lever releases drop leg for use
    • Steel rod lets you easily fine-tune height adjustment
  • Large foot provides stability
  • Sturdy steel construction
  • Bolt-on or weld-on installation
    • Mounting hardware not included
  • Black color

Specs:

  • Bracket height:
    • Retracted 15-1/4"
    • Extended: 22-1/4"
  • Drop leg travel: 7"
  • Lift capacity: 650 lbs
    • Maximum load the jacks can lift
  • Support capacity: 1,000 lbs
    • Maximum vertical load the jacks can support
  • Quantity: 2 jacks

Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.


These stabilizer jacks are handy for leveling or stabilizing lightweight trailers. Support the front of your cargo trailer so you can load it or unload it without the trailer rocking or tipping. Or level your pop-up for a night at the campground.



01892-2 Stallion Stabilizer Jacks - 15-1/4" - 22-1/4" - Qty 2





Video of Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Stallion Camper Jack - Stabilizer Jack - 288-01892-2 Review


Customer Reviews

Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2 - 288-01892-2

Average Customer Rating:  4.8 out of 5 stars   (17 Customer Reviews)


- 288-01892-2
by:

Product came as ordered and ahead of schedule! Using on a camp trailer we put together as leveling feet when I disconnect from the Jeep 666099



- 288-01892-2
by:

Works as described and is built sturdy. 594509



- 288-01892-2
by:

This product deserves a 5 stars on how it’s well done. Robust and sturdy, those jacks are not yet installed and can wait to have installed. Just received them today and im impressed already of the quality. 705242



- 288-01892-2
by:

First of all the packaging was stellar. May not sound like much but says alot about the culture of the company. Have not installed the product yet so can’t attest to the functionality however the quality is top knotch. Will definitely make future purchases. 698879



- 288-01892-2
by:

Fast delivery. 695370



- 288-01892-2
by:

The product was exactly what we needed. It arrived very quickly. Very smooth process 695146



- 288-01892-2
by:

The product I received was exactly what I ordered and appears to be of excellent quality. It was delivered in a timely manner with no issues. I have purchased other items from etrailer.com and expect to purchase more in the future! 694941



- 288-01892-2
by:

Great service, fast shipping, great qua lity 682046



- 288-01892-2
by:

Works perfect, fast shipping thank you 670251



- 288-01892-2
by:

Working on an Off-Road/Expedition Trailer and needed the extra height that these provided. Perfect fit and excellent quality product . Shipping and packaging was right up there with the best I’ve experienced. Thanks! 668375



- 288-01892-2
by:

super fast delivery. excellent product. so easy to deal with awesome company :) 667011



- 288-01892-2
by:

I bought these for rear supports on my army jeep trailer that I turned into an offroad trailer, easy to install with two bolts each. Made very well, and they fold down / up quickly with quick releases for the drop down leg. They come with gloss enamel paint, I'm going to spray them with bedliner to match the undercarriage of the trailer. 663401



- 288-01892-2
by:

This item was as described and functioned as represented. Will do the intended job. 661346



- 288-01892-2
by:

GREAT QUALITY AND SPEEDY DELIVERY 616449



- 288-01892-2
by:

Great product. Stabilizes my trailer when loading not attached to the hitch. I went with a weld on install. Only took a couple minutes to do both. 615287



- 288-01892-2
by:

You really did good. Order delivered before you said it would. Well packed and correct. A plus! The stabilizers and lights will be perfect for my project. 606937



- 288-01892-2
by:

Fast delivery great prices good product s, 595692


17
17

Ask the Experts about this Stallion Camper Jack

Do you have a question about this Camper Jack?


  • Comparing Stallion and etrailer.com Drop Leg Stabilizer Jacks for Trailer
  • Quality-wise there isn't much of a difference between the etrailer.com stabilizer jacks part # TJ01RT-HD and the Stallion Stabilizer Jacks # 288-01892-2 that you also mentioned. I'd recommend going with the kit that matches the height requirements you need best. The # 288-01892-2 has a travel of up to 22-1/4 inches and the # TJ01RT-HD has a travel of up to 18 inches. I also attached a review video for these jacks for you to check out as well.
    view full answer...

  • Will Stabilizer Jack Leg Fit in MaxxTow Adjustable-Height Ball Mount
  • I went to take some measurements for you and found the leg of the Square Drop Leg Stabilizer Jack # SJ-R208 measured 1-1/4" outside to outside of the leg itself and 1-1/2" for the mounting bracket. The tube portion of the MaxxTow Adjustable-Height Ball Mount # MT70068 that accepts the ball mount measures about 2-1/2" from outside to outside and 2-1/8" inside to inside. So the stabilizer jack leg would physically fit inside the ball mount; the only issue is that the pull pin from the...
    view full answer...

  • How Does Stabilizer Jacks # TJ01RT-HD Normally Attach to Trailer
  • I attached an install video for a similar set of stabilizer jacks to the part # 288-01892-2 for you to check out. The trick is you swing the jack to the side which allows you access for hardware through the bottom of the mounting plate.
    view full answer...

  • Could Bump In Road Cause Drop Leg to Fall on Stallion Stabilizer Jacks
  • The drop leg on the Stallion Stabilizer Jacks # 288-01892-2 that you referenced is held securely in place by a spring-loaded lever. The leg cannot physically drop unless the lever is pushed down by hand so you don't have to worry about a big bump in the road knocking something loose that would cause the leg to drop unexpectedly. Also keep in mind that when these jacks aren't in use they can be folded to stow parallel with the trailer frame. When in this position it's locked into place...
    view full answer...

  • How Far Down Do the Stallion Stabilizer Jacks Sit When Closed on the Trailer
  • From where the Stallion Stabilizer Jacks # 288-01892-2 mount to the trailer to the bottom of the mounting bracket measures 3-3/8" but to the lowest point on the leg is 4-3/8" as you can see in the attached demonstration photo.
    view full answer...

  • Mounting Hole Dimensions of Stallion Stabilizer Jack
  • As you can see by the accompanying photos, the Stallion Stabilizer Jacks # 288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650 lbs and a support capacity of 1,000 lbs.The Stallion Stabilizer Jacks # 288-01892-2 also have mounting hole dimensions of 3 inches apart on center
    view full answer...

  • Replacement Handle Rod for Stabilizer Jacks
  • The Stallion Stabilizer Jacks # 288-01892-2 do in fact come with an adjustment bar, also called a handle rod, because otherwise you wouldn't be able to adjust the jacks (which is pretty important). Thankfully, we do have something you can use, the Replacement Handle Rod # SJ-100-HD which will work for your jacks so you can adjust them!
    view full answer...

  • Stabilizer Jack Recommendation that Provides Height Greater than 25 inches for Trailer
  • For trailer stabilizer jacks that are taller than 25 inches the best option would be a scissor jack setup like the Ultra Fab Scissor Jacks part # UF48-979031 which can be adjusted up to 30 inches in height. These mount to the corners of the trailer like the drop down jacks but offer a larger height range and in general do a better job stabilizing trailers so this would be your best option. I attached a review video for these jacks for you to check out as well.
    view full answer...

  • Recommended Stabilizer Support Jack for 40 Foot Trailer When Loading and Unloading
  • From your description, it sounds like you need a stabilizer jack like the Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2 # 288-01892-2. These jacks are able to be out of the way when not needed and then add 1000 lb capacity support when needed and up to 650 lbs of lift. This will give you the support and stability you desire for loading and unloading. If you need more support then I recommend the Ultra-Fab Ultra Scissor Jacks - 30" Lift - 6,500 lbs - Qty 2 # UF48-979031....
    view full answer...

  • Is Stallion Stabilizer Jacks # 288-01892-2 Sold Individually
  • We do offer the jacks of the Stallion Stabilizer Jacks # 288-01892-2 individually with part # 288-01892 so if you only needed one you'd just need to order the # 288-01892 and you'd be set!
    view full answer...

  • Can Stallion Stabilizer Jacks Be Used to Lift Trailer to Change Tire
  • Mounting four of the Stallion Stabilizer Jacks # 288-01892-2 on each corner of your enclosed trailer will do a great job of stabilizing the unit so it doesn't rock back and forth as you load/unload cargo or climb in and out of it, however these are not designed to actually lift a portion of the trailer. Because of this I cannot recommend using these to raise even a lighter trailer like yours for the purpose of changing a tire. A much better option for this is a simple bottle jack like...
    view full answer...

  • Trailer Jacks That Can be Welded to Sides of Trailer For Increased Stability
  • We have close to exactly what you need, although a direct-weld jack such as the Square Direct Weld Jack # TJD-5000 you referenced will not be able to flip up, it will need to remain vertical where it is welded. If you are okay with that then a pair of these jacks will work great for stability so the front of your trailer doesn't pop up and the hitch ball become detached (assuming you do not exceed the 10,000 lb support capacity a pair of these jacks will give you). If you do need something...
    view full answer...


Do you have a question about this Camper Jack?


Used Items Available
RU-19-22-00307480

Condition: Missing Parts

Notes: Item is missing the 2 rods. Otherwise new and unused.

Our Price: $40.88

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Cole B
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.