Menu Icon
Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs

Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs

Item # BD500162

lowest price pledge

Retail:$509.73

Our Price: $332.95

You Save: $176.78
Camper Jack

This item qualifies for Free Shipping

Shipping Weight: 76 lbs

Quantity: 
In Stock, Ships Today
Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs Sidewind Jack BD500162
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

3d view icon
Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs Sidewind Jack BD500162
Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs 8000 lbs BD500162
Bulldog Landing Gear - BD500162
BD500162 - 36 Inch Lift Bulldog Camper Jack
Bulldog Bolt-On Camper Jack - BD500162
Camper Jack BD500162 - 8000 lbs - Bulldog
Camper Jack BD500162 - 8000 lbs - Bulldog
BD500162 - 8000 lbs Bulldog Camper Jack
Bulldog Camper Jack - BD500162
Bulldog 36 Inch Lift Camper Jack - BD500162

Videos


  • Landing Gear
  • 8000 lbs
  • Sidewind Jack
  • Bulldog
  • 36 Inch Lift
  • Bolt-On
Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Crank sold separately. Call 800-298-8924 to order Bulldog camper jack part number BD500162 or order online at etrailer.com. Free expert support on all Bulldog products. Guaranteed Lowest Price and Fastest Shipping for Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs. Camper Jack reviews from real customers.


  • All Info
  • Reviews (11)
  • Q & A (74)
  • Videos (1)
  • Photos
  • Why etrailer?

Bulldog Camper Jack - BD500162

Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Crank sold separately.


Features:

  • Landing gear is designed for use with your 5th-wheel trailer or RV
  • Large, self-leveling footplates provide excellent stability
  • Connecting rod telescopes to desired length to fit your application
    • Position jacks as far apart as you need to and still be able to connect them for tandem operations
  • Sturdy steel construction
  • Black-finished outer tubes and zinc-plated inner tubes resist corrosion
  • Mounting brackets weld onto front of trailer frame
  • Jacks bolt to brackets with included hardware
  • Hand crank (BD500203 - sold separately) is required


Specs:

  • Bracket height:
    • 32" Retracted
    • 50" Extended
  • Total travel: 36"
    • 18" Lift
    • 18" Drop leg
  • Combined weight capacity: 8,000 lbs
  • Outer tube width: 2-1/2"
  • Inner tube width: 2-1/4"
  • Footplate dimensions: 8" long x 6" wide
  • 5-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.



500162 Bulldog Fifth Wheel Landing Gear - 8,000 lbs






Video of Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Bulldog Camper Jack - Landing Gear - BD500162 Review

Today we're going to be taking a look at the Bulldog Tandem Landing Gear set. Now, this landing gear set is designed for use with your 5th wheel trailer or RV. It's going to feature these large, self-leveling footplates that provide excellent stability. Those are going to measure 8 inches long by 6 inches wide and they really help spread out the applied weight, especially on softer surfaces, to help prevent sinking. The self-leveling design means that it's able to tilt a little bit once it hits the ground. That's a really great feature of the unit.

The unit's also going to feature these drop legs, so you're going to have your outer tube, your inner tube and a drop leg. Drop legs increase overall extension for maximum adjustability, and to use those drop legs, this unit features the spring loaded pull pin for quick and easy operation of the drop leg. It's also going to come with your connecting rod. This connects to the jacks, hardware to get that connected is included. This connecting rod telescopes to the desired length, so it extends all the way out from about 36 inches to 70 inches or so, right in that area. This telescopes to the desired length to fit your application so that way, positioning the jacks shouldn't be a problem.

You can position them as far apart as you need to and still be able to connect them for tandem operations. The unit's made from a sturdy steel construction, nice durable design. We're looking at a black finished outer tube and zinc plated inner tubes that are design to resist rust and corrosion. It's going to come with 4, brand-new weld on mounting brackets. These weld directly to the front of the trailer frame. These are included as well as the hardware to get the jacks attached to them.

On each side of the jack you're going to have the welded on brackets that are like those stop brackets for those plates. All that's included and again, the jack bolts to the brackets with the included hardware. It does require a hand-crank to operate. This is manual operation. It's not electric.

Your hand-crank is sold separately, so that's not included. Again, the cross-shaft length, 36 inches to 70 inches. When it comes to the bracket height, simply what we're doing is we're measuring the overall length, so if I do that real quick, for this jack over here, not including the gearing, we can see that's going to be around 32 inches with it retracted. With it all the way extended, that increases to about 50 inches. The unit gives us a total travel of 36 inches, so we're going to have an 18 inch screw lift and then an 18 inch drop leg lift. Combined weight capacity for the unit is 8,000 pounds. Outer tube measures 2 1/2 inches by 2 1/2 inches. Again, the foot plate measures 8 inches long by 6 inches wide. The last thing I want to go over with you real quick is simply the distance between those welded on stop plates or stop brackets. The distance we have in between those brackets is going to be 15 1/2 inches, from the top of one to the bottom of the other, that's going to be 17 1/2 inches. I do want to show you this plunger pin real quick, or this pull pin. It's really easy to use. Right now I have it all the way engaged. When you're ready to extend your drop leg what you do is you grab this pin, and you want to pull it out, and then you can rotate it and it will stay in the open position. That's our drop leg. Provides an additional 18 inches of lift. Then, the spring loaded design, once that pin lines up with the hole, it automatically kicks in there and engages. That's going to do it for today's look at the Bulldog Tandem Landing Gear set with an 8,000 capacity.


Customer Reviews

Bulldog Tandem Landing Gear Set - Drop Leg - 18" Lift - 8,000 lbs - BD500162

Average Customer Rating:  4.8 out of 5 stars   (11 Customer Reviews)

Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Crank sold separately.

- BD500162

by:


The product came earlier than advised...we figured that would happen. It was all packaged together with no real attempt at protecting the whole unit aside from some shrink wrap around the two seperate landing gears. With that said, there was some paint chipping on the cross bar that connects the lead gear to the following gear, big stinking deal I'm the only one in there. The landing gear unit was installed about as easily as could be expected considering I was laying on top of my generator to get the drivers side (following) landing gear, in which coincidently, I had to trim a 1/8th inch off of the top cleat that is welded onto it. The distance between the top and bottom was off just that much that the unit would not fit into place if I did not do it. Knowing that I would measure the distance before feeding up into the brackets and climbing in and then over the generator to ind out it was a bit off. Of course the passenger side (lead) gear went in without a hitch and with full easy access. I installed the bulldog 8000 lb. unit on our 2007 raptor 3712 ts toyhauler. Note: I never downloaded the instructions so...From jacking the unit up from 16" of front clearance to 32" clearance, two small cuts in the under belly to swing the unit in, to the above mentioned customization to completion was 4 hrs. all by myself. I would recommend this product and etrailer.com. I raised and lowered the unit a few times just to try it out and everything was just fine. I should mention I had a previously purchased a metal housed reduction gear and motor that I install instead of the plastic housed gear that it comes with. I have only one complaint and it is the fact of climbing into the generator hatch off of a ladder became a nuicance. But it has nothing to do with the product just the things we have to do if we want to do the work ourselves to save a lot of money. Again, I would recommend this product and etrailer.com. I hope this review helps! 249100



- BD500162

by:


I bought this product to replace a broken landing gear on my 2002 Forest River Sierra Sport 5th Wheel. Upon arrival I quickly discovered that the weld stops were on the wrong sides of the legs for my application, but with a cutting wheel and welder, I was able to remedy this problem fairly easily. The fit otherwise was spot on. I installed this landing gear by myself with no difficulty. After I got it securely mounted, I realized that the old motor from my broken landing gear was different. I have now ordered the high speed replacement motor LG-141893 to install on this landing gear. Overall, installation was easy and the quality of the product appears to be adequate for my application. Thanks to the etrailer.com staff for their help in assuring that this product would work for me. 260048



- BD500162

by:


The Bulldog Landing gear set seems to be very well made and installed very easily. It was a slightly configuration than the pieces I removed but the legs went in without any real difficulties. It helped to have a second pair of hands but that wasn't crucial. As this set doesn't come with a motor I re-used mine and it bolted right up. In hindsight I should have taken more photos of the unit and parts I removed as I had to think carefully about some steps of the reinstall before I got ahead of myself. The ordering and subsequent follow-up by etrailer was very good. I felt like they truly care about my experience. I did have some questions about shipment and delivery and they answered my questions promptly. If I had any criticisms to make it would be with shipment itself. The cardboard box arrived a bit beat up and had some tears in the sides. A couple of the bags inside were also torn and loose parts (bolts etc.) were rolling around inside the box. Thankfully nothing had fallen out, that I'm aware. This was more to do with the choice of carriers though, nothing to do with etrailer itself. On the whole 2 thumbs up. I'd definitely re-order from etrailer again! 230759


Comments

Dwayne,We are replacing our landing gear too with the Bulldog 162 and have an electric motor from the old set. It was good news to hear that an electric motor can be installed on this set of manual Bulldog landing gear legs. So you had no trouble with the connections being the same size??????? Thanks for the info.

-- comment by: Greg H - 03/16/2016

17123
Comments

The system is still working well to date although to be fair we have not used it much since the install. A move to a different city has limited our camping this past year. I hope to remedy that next year.

Dwayne S - 10/24/2016

21611

- BD500162

by:


Yes we received our Fifth Wheel landing on time, it was exactly what we wanted and the quality was over and above our expectations compared to prices they were selling in stores that sell trailer stuff, you were the best. We have been purchasing from etrailer whatever we need for our Fifth Wheel because you have the best prices and the best quality products always. We can only invite anyone looking for anything for your Fifth Wheel, Winnebago, etc, buy it from etrailer and then watch their movies ON YOU TUBE that will show you exactly how to replace your piece as that is what we have done and if it was easy for my non mechanical husband, anyone will understand the videos. ETRAILER YOU ARE THE BEST. 474261



- BD500162

by:


Thank you good service 364312



- BD500162

by:


works great 352090



- BD500162

by:


Wow. What a great jack setup for the price. And what a good company to buy from. It was fast delivery. I'd recommend etrailer to anyone. 252105



- BD500162

by:


A very good product easy to use 242698



- BD500162

by:


Bolted right up, easy to install,work great. Did not have any issues wIth the Bully Dog landing. Box was in bad shape from shipping and nuts and bolts scattered out in box but all there. The only I did not like there is no grease fitting on them, I will install a Zerk fitting on them for easy greasing. I would recommend the Bully Dod Landing yhey worked great for me. ALAL W. 240680



- BD500162

by:


Item I received work great would purchase other items from you in the future 96716



- BD500162

by:


Great set of landing gear for the money. Similar gear was nearly double the price at other vendors. 84405


12
12

Ask the Experts about this Bulldog Camper Jack
Do you have a question about this Camper Jack?


  • Stromberg-Carlson Replacement Follow Jack for 5th Wheel Landing Gear Models LG-1 and LG-183708
  • The Stromberg-Carlson Replacement Follow Jack for 5th Wheel Landing Gear, part # LG-179014, is a replacement for the non-driven side of the # LG-1 powered landing gear and # LG-183708 manual landing gear. Both of these landing gear products use weld-on installation and both have a 6000-lb weight rating. According to my research on the Forest River website, the Cardinal 35-foot 5th wheel trailer model 3030RS has a dry tongue weight of 2,550 lbs. A set of landing gear rated for 6000 lbs...
    view full answer...

  • How to Pick Out Landing Gear for Trailer, Bulldog or Ultra Fab
  • In order to pick out a direct replacement for the landing gear on your 2007 Desert Fox 38U we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...

  • What Landing Gear Will Fit 1996 Avion 5th Wheel Trailer
  • I have a solution for your 1996 Avion 5th wheel, however, it is not as simple as getting two new legs. Your Avion was manufacturered by Fleetwood and the landing gear was manufacturered by RBW. Fleetwood discontinued the Avion and RBW sold out to Al-Ko. Al-Ko decided to discontinue the landing gear and sold the rights to Atwood Mobile. Atwood Mobile decided to not produce the original RBW landing gear. however, to make a long story short, after my research I have found a way for you...
    view full answer...

  • Replacement Bulldog Landing Gear Recommendation for Prowler 5th Wheel
  • For a manual crank set of landing gear by Bulldog you would want the part # BD500162 that has an 8k lifting capacity. For a powered set you would want the part # BD500161. I attached a picture that shows the dimensions of the legs of the jacks for you to compare to what you have on your trailer. The Bulldog stuff works great and typically fits as a replacement for most landing gear sets on trailers. The dimension picture shows the powered jacks, but the important measurements apply to...
    view full answer...

  • Replacement Landing Gear for a Keystone Laredo 5th Wheel Trailer
  • Bulldog Tandem Landing Gear Set # BD500162 is a great option for a manual set to replace the landing gear on your Keystone Laredo. I have linked a video review for you. The handle is not included so use # BD500203 to add the crank handle. For an electric set you could use # RVLG-8HDL and add motor # M1230 and, if you don't already have one, a switch # LC145236.
    view full answer...

  • Replacement Landing Gear for 2011 Jayco Eagle 5th Wheel Trailer
  • You do have landing gear with an odd measurement, but all of the replacement landing gear will be the 29.5 inches or 33.5 inches long. The # LC241846 is 29.5 inches long on that outer tube. Even with the difference in height, the mount locations for the brackets will be 17.5 inches so you can get a replacement landing gear set that is compatible. I've attached a photo to help. For that same 8,000 lb capacity, I recommend # RVLG-8000 to give you matching legs that are compatible...
    view full answer...

  • Could Bulldog Landing Gear # BD500162 Fit 2006 Raptor Camper
  • The Bulldog landing gear set part # BD500162 that you mentioned is designed to fit the standard landing gear dimensions so it should work well. I attached a picture that shows the dimensions that this landing gear set would fit with. The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. The sure way to tell is that if the distance between the mounting brackets (underside of top bracket to top of...
    view full answer...

  • 1996 Carri Lite Landing Gear Replacement Availability
  • In order to pick out a direct replacement for the landing gear on your 1996 Carri-Lite 633RKS we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...

  • Fit of Bulldog # BD500162 Replacement 5th Wheel Landing Gear on 2004 Keystone Montana Big Sky
  • The Bulldog # BD500162 landing gear bolts to its brackets, but the brackets would weld to the trailer frame. You should be able to reuse your existing brackets as long as they're not damaged or excessively corroded. The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. The sure way to tell is that if the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown...
    view full answer...

  • Landing Gear Recommendation for a 2002 Carriage Cameo Fifth Wheel Model F34CK3
  • It looks like you will need to have your current brackets removed and have new ones welded on since none of the landing gear sets we offer are designed for brackets that are 15 inches apart. Any qualified welder could do this for you and would not be a big deal. The Bulldog Tandem Landing Gear Set # BD500162 would be an excellent choice for your 2002 Carriage Cameo Fifth Wheel.
    view full answer...

  • Landing Gear Replacement Recommendation for a 2010 Keystone Montana Mountaineer Model 345DBQ
  • In order to pick out a direct replacement for the landing gear on your 2010 Keystone Mountain we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...

  • Landing Gear Jacks for a Keystone Cougar 5th Wheel Trailer
  • Bulldog square weld-on jack # BD182513 could potentially be used on a 5th wheel trailer but it really is meant for trailers with exposed frames and doesn't have stops on the outer tube for brackets like landing gear jacks have. If you have brackets already then you would just need to weld on some stops to the outer tube and the heights needed. For a tandem, manual landing gear set you could use # RVLG-8HDL which is both legs with the stops already on them, brackets, handle, and connecting...
    view full answer...

  • Troubleshooting Venture Landing Gear Follower Leg that Stopped Working
  • Before you replace the landing gear replacement leg you could try the follow leg repair kit, # LG-146060 to replace the bevel gears. The next step would be then to replace the entire follower leg with part # LG-177201.
    view full answer...

  • How to Pick Out Replacement Landing Gear for a 1999 Fleetwood Wilderness
  • In order to pick out a direct replacement for the landing gear on your 1999 Fleetwood Wilderness we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the...
    view full answer...

  • Motor Availability for the Bulldog Landing Gear Jacks BD500162
  • I spoke with my contact at Bulldog and he said that he has heard of people using the landing gear motor part # 75391 with the Bulldog jacks part # BD500162 that you referenced. But since they have not fully tested this they can't guarantee it will work just fine. However, we had a customer come back and leave a review saying they used this motor with this jack set and it worked well. My contact at Bulldog said that this jack set was originally designed for a trailer manufacturer that...
    view full answer...

  • Recommended Manual Landing Gear Set For 1998 Salem Fifth Wheel Trailer
  • We have a couple landing gear sets that may work well for you. One of the sets we offer is the Bulldog Tandem Landing Gear Set, part # BD500162. This set features an 18 inch drop leg and coupled with the 18 inches of lift gives you 36 inches of total travel. This set comes with 8 inch X 6 inch footplates. This set has a weight capacity of 8,000 lbs. The other landing gear I recommend is the Stromberg Carlson Manual Landing Gear, part # LG-183708. This has a 6,000 lb weight capacity...
    view full answer...

  • Powered Landing Gear Set Recommendation for a 2008 Rockwood 5th Wheel Trailer
  • The highest rated and most popular powered landing gear set we offer is the Bulldog Electric 5th Wheel Landing Gear Set part # BD500161. This set has a 10k capacity that would work great for you.
    view full answer...

  • Landing Gear Jack Recommendations for a Livestock Trailer
  • If you are considering a dual jack setup like the part # BD500162 that's what I would recommend. Two jacks will offer more stability and since two jacks will be doing the lifting instead of one the cranking will be a bit easier as well. The easiest to use setup will be a powered landing gear set though as it would only require you to press a button. For that the Bulldog part # BD500161 would be a great option.
    view full answer...

  • Removing the Gear Box on Bulldog Landing Gear # BD500162
  • To get the gear box off of the Bulldog Tandem Landing Gear Set # BD500162 you would first need to disengage the connecting rod between the two jack legs. So you would be left with just the lead leg and gear box attached. The rod that goes through the leg and gear box also has to come out. This rod is held in inside of the leg with roll pins that have to be driven out to be able to remove the rod. Use a center punch and hammer to drive out the roll pins enough to grab them with pliers...
    view full answer...

  • Would the Bulldog Landing Gear # BD500162 Install on a Franklin Fifth Wheel Trailer
  • Some landing gear sets are interchangeable, but due to the differences in where the weld stops are on some trailer some sets can bolt directly on and others may require modifications to those brackets for a new set to install. Even if the # BD500162 would not bolt directly to your trailer a qualified welder would have no problem moving the weld stops of your trailer so that the set would work on your trailer. This set has a lifting capacity of 8,000 lbs, you may be able to find a...
    view full answer...

  • How to Pick Out Landing Gear Jacks for 1996 Coachmen Catalina
  • In order to pick out a direct replacement for the landing gear on your 1996 Coachmen Catalina we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets...
    view full answer...

  • Availability of Motor Kit for Bulldog Landing Gear BD500162
  • For a 13K 5th wheel the Bulldog Tandem Landing Gear Set # BD500162, which is rated for 8000-lbs, will be more than adequate. According to my contact at Bulldog they do not offer a motor kit for this particular jack. For powered landing gear you might instead consider # LG-1 from Stromberg Carlson. This landing gear is rated for 5500-lbs, still enough for your trailer. For a higher-rated Bulldog powered jack kit use part # BD500161. This is a dual-motor set-up rated for 10K.
    view full answer...

  • Pick Out Landing Gear for 27 Foot Fleetwood Wilderness
  • In order to pick out a direct replacement for the landing gear on your Fleetwood we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Bulldog Tandem Landing Gear Set # BD500162. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the...
    view full answer...

  • Outer and Inner Tube Measurements and Wall Thickness on Landing Gear RVLG-8000 and BD500162
  • The etrailer landing gear # RVLG-8000 has the standard 2-1/2 inch square dimensions like most landing gear sets including Bulldog set # BD500162. Inner tubes are 2-1/4 inches square. The steel wall thickness is approximately 1/8 inch thick. Both landing gear sets are rated for a total of 8,000 pounds.
    view full answer...


Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Laura H
Installed by:
Cole B
Updated by:
Sarah W
Updated by:
Jenny M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!

Call 800-298-8924


^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
73

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.