Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

Item # 90195

lowest price pledge

Retail:$218.03

Our Price: $135.95

You Save: $82.08
Brake Controller

This item qualifies for Free Shipping

Shipping Weight: 1.4 lbs

Quantity: 
In Stock, Ships Today
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional Up to 4 Axles 90195
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Tekonsha
  • Proportional Controller
  • Electric
  • Electric over Hydraulic
  • Up to 4 Axles
  • Under Dash Mount
  • Automatic Leveling
  • 360 Degrees
  • Digital Display
Tekonsha brake controller for your 2013 BMW X3 are available from etrailer.com. Installation instructions and reviews for your BMW brake controller. Expert service, and cheapest brake controller price guarantee. etrailer.com carries a complete line of Tekonsha products. Order your Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional part number 90195 online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (3541)
  • Q & A (4543)
  • Videos (122)
  • Photos
  • Why etrailer?

Tekonsha Brake Controller - 90195

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. Transferable between automobiles.


Features:

  • Brake controller activates trailer brakes in proportion to your vehicle's braking action
    • Automatically adjusts trailer's braking based on deceleration of tow vehicle
    • Activates immediately - no pausing like with time-delayed brake controllers
  • Automatic-leveling ability - internal sensor detects deceleration even if controller is not mounted flat
    • Position at any angle up or down in the vertical plane
  • 5 Storable settings let you customize controller for multiple trailers, varying loads or different drivers
    • Store display settings, brake type, language preferences, and desired boost level and power levels
  • 3 Boost levels let you adjust initial braking power and aggressiveness
  • Continuous diagnostic check alerts you to any potential problems
  • Integrated safeguards protect your vehicle , trailer and the controller
    • Minimizes drain on car battery by drawing only 3.6 milliamps when not in use
    • Prevents trailer brakes from overheating by reducing power output to them during prolonged stops
    • Defends brake controller and trailer breakaway systems against shorts
  • Customizable, easy-to-read LCD display lets you choose color, adjust contrast and pick from different languages
  • Built-in, rotary-style manual override lever
  • Quick-disconnect feature lets you easily remove and store the control when not in use
    • Replacement wiring harness (sold separately) and replacement bracket (TK5906- sold separately) required to move the controller from one vehicle to another
  • Plug-in, vehicle -specific brake-control adapter (sold separately) can be used for certain applications to reduce installation time


Specs:

  • Application: trailers with up to 4 axles (8 brake assemblies)
    • Designed for use with electric or electric-over-hydraulic trailer brakes
  • Overall dimensions: 3-5/8" wide x 4-5/8" long x 1-3/8" tall
  • LCD display dimensions: 1-3/16" wide x 9/16" tall
  • Mounting: 360-degree vertical plane operating range
  • Limited lifetime warranty


Proportional Braking

With a proportional brake controller, you can get heavy-duty emergency braking, general braking or slow-to-an-idle braking for your trailer automatically. The intensity with which your trailer brakes are activated and the rate at which they are applied are dependent on the deceleration of your tow vehicle. This means that, unlike time-delay controllers - which send the same amount of preset power to your trailer brakes every time - proportional controllers are able to adapt to every braking situation differently. So, if you slam on the brakes in your truck, your trailer brakes will activate with that same extreme intensity. And if you merely slow down as you approach a red light, your trailer will gradually brake in the same manner. Just set the initial power level, select a boost setting, and you're good to go.


As long as the P3 controller sits level on a horizontal plane and is pointed in the direction of travel, it will sense - via an internal inertia sensor - how your tow vehicle brakes. This inertia-based sensor responds to the deceleration of your tow vehicle as you brake by signaling the controller to send out enough power to your trailer brakes so that they are activated with an intensity that matches. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.


Power Boost for Heavy-Duty Towing

Aside from smoother, more efficient braking, Tekonsha's P3 brake controller also offers a boost feature that gives you more initial braking power for those times when you're towing heavy loads. You can switch boost levels so that the power output to your trailer brakes automatically starts out at either 13 percent or 25 percent of the predetermined power setting.


So, if you boost the initial power so that your trailer brakes activate with 25 percent of the overall intensity at the start, the brakes will reach maximum braking faster. This is particularly beneficial if you are towing a heavy load because the intensity required to stop that load may be far greater than that needed to halt your vehicle. Therefore, sending out more initial power to the trailer brakes - and causing them to reach maximum braking faster - allows you to better control the trailer so that it doesn't push your tow vehicle before coming to a complete stop.


If your trailer weighs less than your tow vehicle, no boost is needed. But if you wish to set the boost so that your trailer leads the braking of your towing setup, you can select level B1. The following table gives an indication of when you might use the different boost levels and the power increases that they offer.


Approximate Gross Trailer WeightBoost LevelIncrease in Initial Power Output
Less than tow vehicle GVWB113%
Equal to tow vehicle GVWB1 or B213% or 25%
Up to 25% more than tow vehicle GVWB2 or B3*25%
Up to 40% more than tow vehicle GVWB3*25%

*Both B2 and B3 offer a 25-percent boost in initial power. But the braking curve for B3 is more aggressive than that of B2. This means that, even though you will start out with the same intensity when using these boost levels, you will get an overall more aggressive braking experience with the higher level. So if you use B3, you will reach maximum braking sooner than if you use B2.


Storable Settings

Customize your P3 and store settings so that you can easily access them later. If you tow multiple trailers, or the same one but with differing loads, store the desired boost and power levels for each so that you don't have to completely reset the controller every time you switch between the trailers. Do other drivers use your towing setup? Customize the P3 display with your desired screen color, brightness and language, and you can easily return it to your preferred settings the next time you tow.


Customizable LCD Display and Advanced Diagnostics

The P3's LCD display features a distinctive look with multiple color and contrast options. It also includes a highly advanced, easy-to-understand roadside diagnostics display. The P3 advanced diagnostics not only notify you of potential problems, but they can also tell you where to begin troubleshooting.


Display screen when P3 unit turns on.Boost mode one.Boost mode two.Boost mode three.
Display screen is white.Display screen is green.Display screen is orange.Display screen is light blue.
Display screen is purple.Display screen is blue.Display screen is pink.Display screen is cyan.
Screen displays force of braking.Screen displays warning open ground no brakes.Screen displays no trailer connection.Screen displays no trailer connection.

Diagnostic troubleshooting displays include:

  • Battery voltage
  • Voltage supplied by stoplight switch when brake pedal is depressed
  • Output voltage to trailer brakes
  • Output current to trailer brakes

Diagnostic warning signs include:

  • Open ground
  • Overload
  • Output short
  • Power loss
  • No trailer connection

Safety Features

The Prodigy P3 offers advanced safety features to prevent damage to various components of your towing setup. Integrated reverse battery protection shields the brake controller and your trailer's breakaway system from shorts. When the P3 is not in use, it will be in power-saving mode. In this setting, the power draw falls to only 3.6 milliamps, minimizing drain on your vehicle's battery.


When you stop at red lights, or any time that your truck and trailer are at a standstill with the brakes applied for more than 5 seconds, the P3's "hold" feature will activate. When this happens, the power output to your trailer's brakes will be reduced to just 25 percent of the preset power setting so that the brakes will not overheat.


If ever there is a time that you need to brake your trailer separately from your tow vehicle - when traveling down a steep incline, for example - the manual override lever is easily accessible. Pushing this lever engages the brakes on your trailer with full power. In addition, when you activate this override, the brake lights on your trailer will illuminate, properly warning those behind you of the braking action of your rig.


Automatic Leveling and Simple Installation

The self-leveling feature of the P3 ensures that the brake controller continues to function even as you drive up steep hills or through the mountains. Simply mount it in your cab at any vertical angle, and the controller will level itself automatically thanks to its 360-degree rotational range.


Correct P3 mounting360-Degree P3 mounting

Note: The P3 must be mounted on a level horizontal (side-to-side) plane and must be lined up with the direction of travel for the internal sensor to function properly.


P3 mounted in bracket P3 mount

Installation is a snap. After mounting the P3 unit in your cab using the included bracket, hardwire one end of the included pigtail harness directly into your vehicle. The other end plugs into the brake controller. To transfer the P3 to another vehicle or to remove it for storage, just unplug the unit and slide it out of the bracket.


Installation Accessories

For even easier installation, a vehicle-specific wiring adapter (sold separately) is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end plugs into the controller - no hardwiring required.


Note: If a custom brake-control wiring adapter is not available for your vehicle, one of the following will be required:

20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications

30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications


See also etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.



90195 Tekonsha Prodigy P-3 Proportional Trailer Brake Control

39526 Hidden Hitch Proportional Brake Control

20195 Draw-Tite Intella-Stop Xtreme Proportional Brake Control



90195 Installation InstructionsInstallation Details 90195 Installation instructions

California residents: click here


Video of Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tekonsha Prodigy P3 Trailer Brake Controller Review

Speaker 1: Today we're gonna be taking a look at the Tekonsha Prodigy P3 proportional trailer brake controller. This is gonna work great for one up to four axles. The party number is 90195. Now the big advantage we get with the P3 over other brake controllers especially the time delay brake controllers. With it being proportional, it senses the negative acceleration of our truck or the deceleration. And it brakes accordingly.

So if we really jam on the brakes hard, it's gonna give us braking power back to our trailer brakes very quickly.If we do it just in more of a stop and go traffic situation. It applies the brakes lightly. Essentially what that's gonna mean is when the trailer is doing its fair share of the work in a heavy braking application, you're saving wear and tear on your truck and the same vice versa on your trailer. So for a light braking situation, you're not overworking your trailer brakes causing those to wear out prematurely.Now the P3 can also be mounted in just about any position as long as we keep it straight in line with the direction of travel. That's gonna give you a lot of mounting options on where you wanna put it even if you wanted to go like down on the dashboard or something like that.

Really not gonna have any limits. Now to change are breaking output, we've got our buttons right here. You can see max power is gonna be 14 and we can bring that all the way down to zero.Zero would of course be when you don't want the brakes on your trailer to be applied. And then we can slowly bring that up to the adequate braking performance that we're looking for. That's gonna vary on road conditions and it's also gonna vary on the load that you have on your trailer.

The more weight, typically the higher you're gonna set this. And a rule of thumb is to set this just below where the wheels on your trailer will lock up. So on a lighter load, they're gonna lock up sooner than with a heavier load.So we'll just move that up. Then when we operate it, you can see it's gonna go up to that 2728 if that's where we have it set. Whether we do our floor brake, when we're in movement or a manual override here.

Now if we move that up, whether we hit the brake on our floor again or we hit our manual override, you see it's gonna up to what we have set. So we're never gonna have to worry about the trailer locking up and causing it to be unsafe. Now with those settings properly adjusted, you're never gonna have to worry about your trailer tires locking up and causing you to be in an unsafe situation.The next setting's gonna be our top right hand button. That's for our boost mode. Now that's gonna change the quickness and aggressiveness in which your brakes are gonna be applied. So for a lighter trailers, we really don't need it. We can typically brake with our vehicle. Everything's gonna be safe. But as those get heavier and heavier, we want those to come on more quickly and more aggressively to keep everything handling properly. Now in standard small utility trailers pulling it behind your vehicle, you're probably just gonna leave boost level off.You see we've got a truck here with a small trailer. Now in boost one, we're going to a slightly larger utility trailer, tandem axle. Boost level two, that's gonna go up to more like a fifth wheel style trailer and boost level three, again, a larger trailer than that. Now that changes the quickness and aggressiveness in which your brakes are applied. So as our loads get heavier, we want those to come on more quickly and more aggressively to keep everything nice and safe. Now we also have our menu here. The menu allows us to change our display settings, whether we wanna change the brightness or the color. It's gonna allow us to change the brake type so with this controller, not only are we gonna be allowed to use an electric brakes, but also electric over hydraulic.And then finally we've got our help mode here if we needed some assistance. The P3 will also allow you to program a couple of settings. So if you have different drivers that kinda like the brake controller set up differently or if you have different size trailers, you can have them pre-set in their, be able to get to them without having to change all the settings. Now the manual override level, you can see, is really easy to get to here. This is designed to allow us to apply the brakes of our trailer without applying the brakes of our truck.Typically this is used in a sway event type situation. Now the P3's gonna have some built in safe guards too. The first is gonna be battery rem down protection. So if we stop and park somewhere, if we're not using our brake controller, it's gonna power off after a few minutes to keep our trucks battery safe. Next it has short protection, and it's gonna protect both the truck and the brake controller from faults coming from our trailer. And now if you'll take a look at this screen, it's gonna have disconnect warning. So if the trailer plug we're to wiggle out somehow or not be connected properly, it's gonna flash and let us know.As soon as we get that plugged back in and we have a proper connection made, it's gonna go right back to its normal operating mode. Now when comparing the P3 to other brake controllers available on the market, it definitely stands out above any other time delayed systems. As you can see with the time delay brake controller, we have a pre-set amount of time it's going to take for our brake controller to get to the maximum gain that we have set. This means with a setting to high, we can cause premature wear on our trailers brakes and tires. Or with a setting to low, we can cause premature wear on our vehicles brakes.Now when you reach 100% with the time delay controller, it's gonna stay at that gain level the entire time your foots on the brake. With the newer technology built in, the proportional aspect is definitely the way you wanna go. Now this controller is also designed to work with the electric over hydraulic braking system. So if you have that, I'd be a great choice. When you compare that to other brake controllers on the market, some of them are not gonna offer that feature. Now the Prodigy P3 is one of the most popular brake controllers available on the market. And you see it echoed over and over again in our customer reviews.It's like Dennis C said, "In my opinion, the Tekonsha brake control products are the best on the market. I purchased the Prodigy P3 as an upgrade to my old Tekonsha Explorer unit. The added features that come with this unit such as the boost feature and electronic read out are exceptional and easy to program." A year later he said, "I'm as happy today as when I purchased this unit. I have made several long hauls, 3,000 miles or more, and many short hauls with my trailer. This controller has worked flawlessly."And that'll complete our look at the Tekonsha Prodigy P3 proportional trailer brake controller. Part number 90195.


Customer Reviews

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional - 90195

Average Customer Rating:  4.9 out of 5 stars   (3540 Customer Reviews)

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. Transferable between automobiles.

- 90195
by:

Easy install. Works perfect. Fast shipping. Best price. 572632



- 90195
by:

I haven't used a lot of other brake controllers but I wanted to buy one that was easy enough to use and intelligent enough to where my girlfriend and/or mother could operate it and not have any sort of stopping issues (both have next to zero experience towing a trailer). From the small amount I've gone out and tested this, it works absolutely awesome and is very easily adjustable. I took my 26' enclosed trailer out with my 3800 lb car inside and the truck stopped almost exactly the same as with no trailer at all. My favorite parts are the fact that I can easily adjust the boost settings by clicking a single button and that it can distinguish between a gradual stop and a panic stop and adjust trailer braking force accordingly within a fraction of a second. Got cut off quite a few times like is normal in Chicago traffic and was able to hit the brakes and KNOW that everything was going to stop when I needed it to. Worth the extra money in my opinion to have a controller that I know is going to work great every time and that anyone in my family could operate correctly if needed. The built-in fault detection system is great also, no guessing if your trailer brakes are hooked up or working correctly, if it detects an issue at any point, it tells you right away. 154701



- 90195
by:

I could have ordered the parts directly from the website and had the same result but it was good to speak to someone at Etrailer to reassure me that I had selected the right components. Installation instructions were excellent. the unit and trailer brakes worked great. 574499



- 90195
by:

The Tekonsha Prodigy P3 brake controller installed very easily in my 2010 Tundra with factory towing package. I purchased the plug-in wiring adapter for quicker installation. This controller is very easy to set up with the preinstalled settings and very little fine tuning. 564856



- 90195
by:

I just purchased a new 2017 Chevy Silverado 1500 4.3 L V6, 8ft bed, base model truck, with no options. The truck is rated to tow a 5900 lbs trailer with a CGVW limit of 11000 lbs. I will be towing a Lance 1985 travel trailer, that weighs in around 4500 lbs wet. With excellent reviews and outstanding installation videos from etrailer.com, I ordered the Curt C14006 class IV hitch; the Tekonsha proportional Prodigy P3 brake controller; the Tekonsha plug-in wiring adapter specified for my truck; Cipa custom slip-on towing mirrors; and the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - HM40975 specified for my truck. All new Chevy Silverado 1500's (even the base model with no options) comes from the factory pre-wired with a basic seven wire trailer towing harness already installed. Everything electric just plugged in without a single cut or splice of the wiring or any other wiring modifications. I just followed the instructions in the excellent installation videos on the etrailer.com website. The hitch installed quickly and lined up perfectly with factory bolt holes already on the truck frame, no drilling required. Finally I slipped on the Cipa custom towing mirrors and I was ready to tow after about two hours work. If I would have ordered my truck with a factory tow package, integrated brake controller, and extendable towing mirrors, the options would have run me slightly over $1450 on a new Chevy truck. Instead, I spent two hours of my own time doing the installations and paid about $550 for all the parts by ordering by from etrailer.com. Nice savings. You need to have a good set of socket and open end wrenches, including a torque wrench adjustable to a minimum of 110 ft/lbs for the hitch bolts. Spend some time and review all the installation videos for the parts that you need to order. The etrailer.com website also has downloadable installation instructions provided by the parts manufacturers. 477369


Comments

I have towed about 3,000 miles, everything is working great no problems. I

Stephen N - 02/20/2019

49693

- 90195
by:

Quick hook up and works with all 3 different types of trailers we pull with our truck and their different brake types. Great product and easy to set up and dial in depending on the load. I would highly recommend this for any vehicle needing trailer brake control. 574264



- 90195
by:

I called E Trailer, Ricky S. Answered the phone, He was extremely helpful on my purchase of the Tekonsha P3. I have ordered at MANY places, I have one thing to say, E Trailer is where I will shop from now on! Got my product In 2 days! I live in michigan, that was the fastest, but I had payed the extra couple dollars to expedite. Thanks to Ricky! I am super satisfied! And will d effinatly recommend E trailer! And they Stand behind the products they sell. Thank you Rick! Wish every place I ordered from was as considerate and helpful as you are! I am going to be a loyal customer :) 222627


Comments

I have had this controller for about a year,It is ABSOLUTELY the best i have ever owned,and i have had MANY of the cheaper ones. Etrailer is the place I HIGHLY RECOMMEND TO BUY FROM! I have got Superior service. I will buy my future products from E trailer.??

Danny R - 08/28/2016

20622

- 90195
by:

I installed this on a 2018 Subaru Outback. On my model the pale green wire was the brake stop light wire. The install was a little daunting but with patience and time it can be done, don’t give up!! One important thing to note is that THE READOUT ON THE BRAKE CONTROLLER WILL SHOW A NUMERIC OUTPUT WHEN YOU PRESS THE BRAKE IF INSTALLED CORRECTLY. Of course you need to have the trailer plugged in first. If you are driving and testing after the install and you don't get a power readout when you press the brakes you may have a problem with your brake stop light splice. That’s where my problem was. I had to buy some additional wire splicers because the ones provided were too big. Two very important things to remember. If installed correctly go put your ear by the wheels with brakes (on the trailer) and get someone to pull the manual brake lever. You should hear a hum sound. That means it’s working. Remember, if you’re in a bind and you need to use your trailer and your brake pedal isn’t activating the electric brakes but the manual brake is. You can use your manual brake instead. But don’t do this long term, I’m sure it’s not good for it. This is just some advice in the install. Otherwise it’s been a great brake controller! 530029



- 90195
by:

This new P3 operates much better than my first, entry level controller. I wired it in my 2006 Jeep Commander that is used to tow my 2015 4,700 lb Rockwood Mini Lite trailer. The wiring instructions were clear, as were the initial set-up procedures. The P3 activates the brakes very smoothly without the lurching I had with the prior controller. Living in the Pacific Northwest, I am often driving over mountain passes, and with the P3 I am now confident my trailer brakes will function in a smooth, progressive manner. I would recommend the Tekonsha Prodigy P3 to anyone. 221013


Comments

I removed the P3 from the Jeep and re-installed in my recently purchased Ford pick-up. No issues with the installation and the unit continues to function fine.

Joe R - 08/21/2016

20441

- 90195
by:

A snap to install with the custom wiring kit. Took me all of 30 minutes ....... Biggest problem is where to install the control so you can get in and out of the vehicle without smacking the controller..... But all things considered a great product. 574351



- 90195
by:

Well, you may not see the actual brake controller in these shots, but I wanted to display just how much etrailer product was used to restore this old trailer. Re-decked the trailer, new wheel bearings, added brakes on all 4 with this brake controller and battery powered emergency disconnect... new rust protection, primer and paint, new lights and wiring all the way around, new wiring harness/box, and new tire carrier. Nearly all product except the decking and paint was from etrailer. the customer support was fantastic, I highly recommend this company! 546570



- 90195
by:

Works great. Fast shipping. Thank you. Always pleased that etrailer will help with technical questions over the phone whether you are currently buying or not. 575953



- 90195
by:

I have not connected the Brake Controller yet, but all I can say It was very easy to order. The price of the unit beat all other companies that was selling the exact model. The free shipping helped also. I thought it would take a week for the controller to arrive, but it was on my door step in two days with regular shipping. etrailer is a GREAT company for their products. Before I look at any other company for an item, I check with Etrailer first. I am getting ready to place a order with them now for an additional item. Etrailer, YOU GUYS ROCK!! Thank you for the great service! It has been a long time since I have been able to say that about a company!! 440018


Comments

The brake controller was installed and worked exactly the way it was described. The controller installation was very simple after reviewing the video for the product. In my opinion the video is a big plus in purchasing items from etrailer. Once again, keep up the GREAT work and customer service and I will always be back and refer all your products to family and friends!! Thank You Again!!

Derrick M - 10/06/2018

44379

- 90195
by:

Great product and I have found that etrailer is the best at customer support. They will always get answers to your questions and provide pictures and videos of many installations. I always use their website and 800 number for all questions I have. 575661



- 90195
by:

Found the teckonsha p3 easy to install. Have not used it yet waiting to install flatbed on truck. Like the features on this unit. 575550



- 90195
by:

Bought a Rockwood A122 camper that I pull with a 2018 Toyota Tacoma (I previously had a 2017 Tacoma). Bought the Prodigy P3 after doing a bunch of research online. When it showed up I was kind of blown away with how easy it was to install. The Tacoma has a Trailer Brake connector stuffed up under the left foot kick panel. Popped the panel off, found the connector and hooked it up. That's it! Then zipped two screws in the mount on the lower lip of the dash which no one will ever see even if the brake controller gets removed. Took me a little fiddling around to get it set for the right amount of braking that suited me but I have yet to touch the thing or mess with it since installing it. It just WORKS. It's small, unobtrusive (if you mount it in the right place) and it just works day in and day out with a minimum of interaction. Get one of these. 574016



- 90195
by:

Seems to work good, but the trailer brakes could not be adjusted to lock up no matter how high I adjusted the settings on the controller. According to the owners manual it should be able to lock up. Could it possibly be defective? Any help would be appreciated. Thanks 575180


Comments

The first thing youll want to check is that the brakes are properly adjusted. Jack up the trailer and use a brake adjusting tool to run the star wheel on the adjuster down until the wheel cant be turned by hand. Then, back it off by about 10 notches of the star wheel, or until theres only a very slight brake drag. If the brakes are properly adjusted, use a voltmeter to test the wiring at each brake magnet while a helper activates the manual override on the brake controller. You should see about 10-12 volts, but NO LESS than 10 volts. If youre seeing less than 10 volts, check the connector on the trailer and on the vehicle, making sure nothing is damaged or corroded. Trace the brake feed wire from the trailer connector back to the brake magnets, making sure that all connections are secure and that the grounds are connected to clean, bare metal. Examine the brake magnets themselves, as well. If the face of the magnet is excessively grooved or worn to the point where the copper wiring in the magnet is visible, the braking effectiveness will be greatly reduced and replacing the magnet would be recommended. Its usually recommended to replace the drum and magnet at the same time, if the armature surface of the drum shows any wear.

-- Mike L - 10/18/2018

44789

- 90195
by:

I pull a 30 ft. fifth wheel. My break controller that came in my diesel pickup gave up the ghost. To fix it would be to expensive. I purchased a Tekonsha Prodigy P3 Trailer Break Controller and my problem was solved. It works very well. 575187



- 90195
by:

I purchased the Prodigy P3 and wiring kit for my 2017 RV on a Ford E350 chassis. I removed the small dash panel to locate the Ford wiring harness, then along with the 3034-P wiring kit it is simply plug in, adjust settings and go. 572625



- 90195
by:

Crazy fast shipping ordered my item Tuesday morning got it Wednesday afternoon! Fast and super helpful. 575167



- 90195
by:

The Tekonsha P-3 was reasonably easy to install, and works like a champ. I had to spend a bit of extra time fishing wires because my truck didn't come with factory tow package wiring, but even then it wasn't hard, just time-consuming to route the wires where they won't get chafed. The controller comes with a nifty click-in mount, but I just used the U-bracket (also included) because I have no need to move it between vehicles. It's nice to have the choice of how to mount it. The instructions were very clear and easy to follow, even for a non-plug-in installation. It took me a little while to get it adjusted so that the trailer brakes didn't lock up on hard stops, but once I got it there, it's great - no more feeling like my trailer is going to push the truck through the intersection when I stop. It's easy to adjust for different trailer weights. It's almost too easy to adjust, in fact: I'll have to keep an eye on it to make sure I don't accidentally hit the "boost" button, which is designed for heavier trailers - I wish there were some way to disable the boost feature from the menus. Overall I'm delighted with the P-3. I like the text interface instead of cryptic numbers that so many units use, and I love the way it performs. 49045



- 90195
by:

Have always had good luck with the Prodigy B/C.. The new model I expect the same from. Haven't tried it yet but, but will nxt weekend, as we pick up the new trailer!! Megan L was great to work with, and made sure that I was satisfied.. shipping was fast also!(2 days) thanks again Etrailer for another great experience!! 573781



- 90195
by:

Prodigy P3 brake controller was a very easy install with the help of etrailer video for 2007 chevy silverado new body style. Melissa W. was a big help with ordering everything I needed for the install. She knew what she was talking about. She was huge help before, during and after the purchase. She followed up with emails to confirm my order arrival and sent me other information about the install that I didnt even ask for. Great customer service so far! Thanks Melissa! Seems like a well built product. I will follow up with a review once I get to use it with my new trailer. So very glad I pruchased this model from etrailer.com. I went to the trailer store down the road from me and the same model would have cost me $40 more. Good job etrailer and Melissa W. 5 stars so far! 574141



- 90195
by:

This unit was little bit of an issue to install (not too bad though), I also bought the # 3050-P Tekonsha Plug in wiring adaptor (This makes it very easy to connect to the existing harness in the Nissan without hacking the wiring to connect to it), the lower part of the dash had to come apart so I could route the wiring to the area where I wanted to install the unit which is where Nissan would install their unit as you can see in the photo, plugged it in and it came up as instructions said it would, seems to be okay will have to wait and see when I go to use it. 575462



- 90195
by:

After a year of use , the brake controller is great . It was easy to mount and connect . Nice probuct . Would buy again . 576108



- 90195
by:

Loved the brake controller but didnt come with the adapter. Had to order it separately. Wasnt happy about that now i have to wait another week. To hook it up. 573601


Comments

The brake controller itself is not a vehicle specific item, itll include a universal harness that terminates in blunt cut wires that can be wired directly to the vehicle. There are a few dozen different vehicle-specific harnesses that will allow a plug and play installation, if your vehicle is equipped with the connector under the dash. The vehicle-specific harnesses arent included with the brake controller, theyd need to be purchased separately.

-- Mike L - 10/12/2018

44543

- 90195
by:

After tiring of jerking, over reacting brakes from my trailer, or delayed almost no brakes (there was no in between) from my old 90's era Tekonsha Voyager XL (that has served me well through three trucks...until this last year), I finally decided to upgrade. What a difference! The P3 is silky smooth. I took it for a test run pulling a 8x21 enclosed trailer (empty at 3800#), 2 brake axles. Was easy to dial in. I started at a much lower setting then the instructions say. I never set my brake controller by "if the trailer tires slide, reduce power" meathod. I just paid $500.00 for good trailer tires (not china bombs) and I'm not fond of locking them up on pavement. So, i started low and worked my way up until I liked the braking action. Display is easy to read, day and night, even with my 53 year old eyes. It does concern me to see several pictures and one install video of the controller mounted below the dash. Very difficult to reach the overide without compromising your driving position and view of the road. Maybe it's just from towing with a controller with heavy loads for so many years...when you need to grab that overide there is a good chance its because there is a 'situation'. I'm right handed so mine is mounted just above my right knee. I only have to extend my arm to reach the overide. In fact, I make a habit of occasionally using the overide just to make sure I know how it feels...in an emergency, I don't want any other surprises. lol. I absolutely love etrailer.com...the best customer service on the web, good prices and great products. 565827



- 90195
by:

Writing my one year follow-up review on my Tekonsha Prodigy 3. Well so far so good, works just like day one. I have it installed on my 2012 Toyota Tundra hauling a 28' travel trailer and it does an awesome job. I actually recommended this to my neighbor right before he was going to buy another brand without the manual brake override lever and he thanks me very time he gets back from a trip. I don't use it as often but I've been towing for a while and this is his first trailer so he feels safer using it, I know I do. So if you ask me I do recommend getting this brake controller. Easy installation and adjust to your braking power. Has lots of features and makes you customize your braking power. I also like the case it comes with to protect it when not in use. That's basically all I have for this controller. 565952



- 90195
by:

Overall, this probably the best brake controller on the market, as far as braking performance. It provides braking as smooth and safe as is possible with electric brakes. Adjustments are easy, with provisions for remembering the settings for multiple trailers. The manual control toggle/knob is very sturdy and smooth operating. The P3 controller is not without some design faults. The supplied brackets are OK for some installations, but they both position the controller too far from the mounting surface, often creating a knee-banger situation. While trying to figure out how to mount the controller in our new 2015 Nissan Xterra, I finally gave up on the brackets and used some industrial quality 3M dual-lock fastener (like velcro on steroids) to mount the controller. The controller is securely mounted right up against the lower dash panel, but is still is removable, if needed (see my photo). Although the curvy potato-like shape is aesthetically pleasing (to some), it would have been much easier to mount, with less wasted space, if the four sides were straight. The body of the connector that plugs into the rear of the unit should have been designed so that it is recessed into the unit, instead of sticking out almost an inch. That would have made the controller able to be installed with its rear panel right up against something, when necessary. Finally my biggest complaint is with the quality (or lack thereof) of the LCD display. The display on my controller is barely readable even when viewing perpendicular to the screen. If you are off axis by more than 20-30 degrees the display is unreadable. Rarely is it possible to mount a brake controller where the driver has a straight shot at the display. This is almost never the case. Modern LCD technology provides affordable displays that have an incredible off-axis visibility. I would have thought that Tekonsha would have included a display that is up to the same level of quality as the rest of the P3 controller. Instead, it appears they used a bottom of the line LCD with 1980’s technology. I tried all combinations of settings for color and brightness. Some were worse than others, but none of them were good. 233610



- 90195
by:

The hitch and controller was installed on a 2002 Chevy 2500HD. It took roughly 15 min to install the Tekonsha P3 Brake Controller, plug it in and program it. As far as the B&W Turnover Ball Hitch, I cut the hole in the bed and cut the heat shield out the day before while I was waiting for the hitch to arrive. The next day my parts arrived, I laid out all the parts to make sure everything was there and then started the install. I didn't want to cut the 1"x1/2" notch out of my fender well to get the angle iron in so I spent about 15 min. trying to get it up on top the frame from underneath the truck. A waste of time. Do like the instructions say, cut the notch and slide it straight across the top of the frame. It will save time and aggravation. After getting both braces in place I ran a piece of rope down thru the hole and pulled the hitch plate up into place and tied it off. I installed all the bolts finger tight, put the side plates on and tightened everything up. It looks nice and I saved myself a $435.00 installation fee. With out a lift and without taking my rear tires off it took about 3 1/2 hrs. to install by myself. The only thing I want to say to B&W is don't place the heavy metal hitch parts on the booklet with the packets of Lithium Grease in it, they bust as the picture shows. Last but not least, thank you Sherry for all your help with my order and getting it to me quick in such short notice. I really appreciated it. 358379



- 90195
by:

I purchased the Tekonsha P3 proportional brake controller and the Plug-in Wiring adaptor for my Dodge Ram Diesel 2005. It shipped promptly and arrived on schedule. I plugged it into the under-dash socket in about 30 seconds and tried it out before installing it; it powered up immediately and everything looked good. It took a few minutes to install the P3 bracket to the dashboard just to right of the steering column and about the level of my knee. The adaptor has enough length to put it left or right of the steering column, but not very high on the dash. The adaptor made the installation quite simple – gathering the tools and deciding controller placement took 20 minutes out of the total 30 minute installation time. The actual installation was to drill 2 holes and screw in 2 screws to the dash and 2 screws to the pocket bracket, then tying the cord to other wiring behind the dash. Settings for electric brakes and other info into the unit took under 2 minutes. Wow! What a difference - the braking was strong, smooth and uniform. I can only compare on my vehicle to braking without a controller unit engaging the trailer brakes, but it showed me how important those brakes are to an easy and safe stop. I have driven other people’s trucks with loaded horse trailers, and their controller units did not give anything like the constant readout of trailer brake voltage and other information this one gives you. This is obviously a high quality unit with everything I need and more. My priority is horse safety on the road and that includes smooth, proportional braking. I like the ability to monitor the voltage of the vehicle system, the volts and amps to the trailer, and troubleshooting capabilities. I spent 6 or 8 hours reading everything on brake controllers before ordering this one, and compared it to several other highly-rated units. While it is available for similar pricing from eBay and other sites, I found etrailer.com's website to make things very easy, such as finding the exact Plug-in Adaptor for my vehicle, finding videos about various controllers, and finding instructions for installing the unit. Thanks to the etrailer.com website, I was able to check under my dash to verify the brake controller plug was there waiting to be used, and I had a very realistic idea of the installation procedure in advance. Getting the Plug Adaptor in the same shipment was important too, and let me install it immediately. I was glad I ordered from etrailer.com and would not hesitate to order from them again. 164083



- 90195
by:

I primarily picked this controller based on product reputation and customer reviews. I had picked this controller over it's sister product Tekonsha P2 based on the etrailer tech product review who compared the simplicity of the P3 readout compared to reading letter and period codes on the P2. The 4 buttons on the P3 make it easy to scroll through settings and diagnostics. Need to contact Tekonsha while on the road? ...their contact info is even found in the HELP option (lol). I love the sturdy feel of the bottm half of the controller made of cast metal. It comes with a bracket that holds a quick-release holder for the controller for people that want to move the controller from vehicle-to-vehicle, or a bracket that will solidly attach the controller with 2 screws. Having many videos and photos of other installs available on this website made this a breeze to mount even for a novice like me. I installed it in a 2001 Jeep Grand Cherokee w/factory installed tow package using the etrailer part #3020-P "Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge". It connected flawlessly to both connections in literally seconds. A test light at the rear of the car confirmed that the 7-pin trailer connector brake pin was actuating when the brake pedal was depressed. NOTE: 2001 is the only year in the Jeep WJ series with the factory installed MOPAR connector; the other years in the WJ series, with factory installed tow package, have a single blue wire running to the 7-pin trailer connector. Total install time was under 30 minutes including tool roundup and waiting for my wife to put on her shoes to press the brake pedal to confirm power to the trailer connector. 175399



- 90195
by:

I ordered the Tekonsha P3 for my 2016 VW Touareg TDI. etrailer had a really great video about how to install it. It was a little difficult finding the electrical connection under the dash. The plug for the harness was under some grey foam rubber. I was ready to give up until I felt something that may be a plug under the foam. I scratched and tore the foam until I tore a hole in it. I then found the connector under the foam. This is all done working blind with one hand. I had already purchased the wiring harness coupler wires and parts from the VW Dealership Parts Department. When the Tekonsha P3 arrived, I assembled the harness with the dealer parts (wires and connector plug) and the electrical connector that came with the P3. I triple checked my work when building the connector harness. I covered the wires with some protective wire wrap after securing all connections with electrical tape and cable ties. My wiring harness was great looking. I had to reach under the dash, working blind, and I connected the harness to the plug under the dash. I had lubricated the plug with a small amount of synthetic grease. I had to work with one hand. There was not anything behind the connector plug to push against. So, I made a tool with a small piece of wood. I put the wood behind the plug and this gave me something to push against. I was elated when I felt and heard the coupler plug snap into place. I installed the new brake controller bracket and brake controller. The result was no power at all to the brake contoller. I took the Tourareg to the Dealership with instructions to program the computer for towing. Keep in mind the Dealership does not install brake controllers. The technician did a great job. However, he told me that I may have assembled the wiring harness wrong. I said I would go and check it out. When I hooked up the trailer and P3 brake controller, it all worked fine. I had power to the brake contoller. I programmed the Tekonsha P3 with my settings into the P3's memory. The P3 has a nice electronic display. The Tekonsha P3 works great for towing. All trailer lights work and there is 12 volt power charging the trailer house batteries. I did a test drive and I noticed nice even braking on the trailer brakes. So, I am happy with the Tekonsha P3. It works great on the 2016 VW Touareg. I am starting to think you may be on your own when it comes to brake controller installation. The dealership may have to program the tow vehicles computer. In my case, the computer had to be programmed. I was provided a loaner car and there was no charge for programming the computer. Thank you Volkswagen. 541827



- 90195
by:

Bought to replace a P2. Comparing the brake controlling performance, I don't really see any significant difference between the P2 & P3. As for features, the P3 is light years ahead of the P2. The diagnostic features of the P3 are extremely helpful when towing a light or unloaded trailer, where possible issues with the trailer brakes (i.e. shorts or broken wires, etc.) wouldn't be that noticeable. Both of my Tekonsha controllers were 5 star performers. What cost the P3 a star is the bracket options. The P2's bracket was plastic and I never had a problem with it hold the unit and I'm sure the P3's plastic bracket would perform equally well in holding the unit. Unlike the P2 bracket, which I mounted directly under the dash, the P3 uses an additional metal bracket to attach the plastic part to the under dash area. The additional metal bracket causes the unit to stick out almost an additional inch. For those with manual transmissions, the could be an issue while using the clutch pedal. Since I won't be using the P3 in more than 1 vehicle, I used the other metal bracket for permanent installations. It too wasn't without concerns. Using the upper holes of the bracket caused it's side tabs to stick out beyond the bottom of the unit. Hating to find out what these protruding tabs could possibly do to my knee in the case of an accident, I just cut the excess off. Though the P3 is unquestionably the best brake controller available when it comes to performance and features, no matter if your pulling a 10K triple axle or a 5x10 enclosed trailer, it's mounting hardware doesn't seem to be that well thought out. Thus it rates just 4 stars. (I would give it 4 1/2 stars if I could) 403856



- 90195
by:

So easy to install, I watched the how to videos and it was just that easy! Great product so far, hooking it up to the new camper next weekend. 571327



- 90195
by:

The actual installation of the prodigy P3 took less than 5 minutes with the plug-in adapter. If you have a factory tow package get the adapter-no double checking each wire to be sure it is right, no cutting, or wire nuts-just plug and go. another 2 or 3 minutes to set it. Honestly and it has been said in other reviews- it took longer to get the screwdriver and then figure exactly where I wanted it! checked settings at the school parking lot and it works as advertised. the brakes on my truck told me thank you for relieving them of some of the load. Thank you Tekonsha. Etrailer gets thanks for being the best with price, service and followup. 567811



- 90195
by:

Purchased the Tekonsha P3 and the plug-and-play harness 3017-P for my 2017 Toyota Tacoma with factory tow package. First let me say that I love doing business with etrailer.com. The customer service is top notch, the information available on the website is thorough and helpful, and my orders are always fulfilled correctly and timely. I will remain a loyal customer. As far as the P3 controller goes, this is a great product and works exactly as advertised. I just installed it so no long trips yet, but in a few short test pulls it handles both my 28 foot travel trailer and my flatbed utility trailer just fine. The wiring adapter was plug and play just as advertised and made installation a breeze. It's a little tough to find the plug on the Tacoma and it's necessary to remove some trim to get at it unless you've got much smaller hands and are more limber than I am. The plug is way down low on the left behind and above the dead pedal and Toyota doesn't give much slack. I spent way more time just mocking up and trying to figure out where to mount the controller than I did actually doing the job. Not many good places to choose from on these newer Tacomas. I almost settled on the center cubby area, but it was going to be a lot more work than I wanted and besides I would lose some useful storage space and a cupholder. Didn't want to put it anywhere my knee would smash it because I'm a pretty tall and big guy. Settled on the area shown because I could make a little hole in it easily to run the wire through and the otherwise useless little cubby provides some extra strength/and stability to the back of the unit for mounting. It's nice and tight there, still removable, and very easy to reach and operate. I can remove the controller easily when I am not using it, and it comes with a handy little storage bag. Sorry for the poor quality pics but hopefully they will give some idea of how this worked. There's probably an easier way to get at the back of that cubby to drill it than removing the whole panel, but it was no big deal and took all of two minutes to do once I had decided on a mounting location. 495742



- 90195
by:

I purchased the Tekonsha P3 electric brake controller to use on our 2017 Pacifica Touring-L Plus with towing package. Our Pacifica was pre-wired for an electric brake controller. So along with P3, I ordered the plug-in wiring adapter 3045-P made for the Pacifica. First I determined where to mount the P3, making sure the wiring adapter would reach the P3. I located the Pacifica's pre-wired harness. I had to remove an empty plug that was installed into the receptacle on the end of the pre-wired harness. I then plugged the the adapter into the now empty pre-wired receptacle and then the other end into the P3 (the P3 lit up immediately). I zip tied the wires of the adapter in a way that it would not interfere with anything under the dash. The install was then completed. I liked how easy it was to install everything. The P3 will be used to control the brakes on our R-Pod travel trailer. Adjusting the P3 was as easy as reading the instructions that came with it. The display, when the controller is not in use, will light up when using the vehicles brakes (trailer not connected). When the vehicle is not in use the display will eventually turn off. See the pictures I supplied. 426461



- 90195
by:

I bought this for my Chevy Silverado 1500. For the most part, its pretty good. I tow pretty often but I don't use the brake controller much -- usually I'm towing things that don't need it. But, I have it, and its ready for when I do need it. The good: * Its nice and featureful and has a very top-of-the-line feel to it. * Its easy to read, easy to use. * Very easy to unplug or completely detach from the car when you just want to store it -- this is a big plus for someone like me who isn't using it every day. The bad: * It came with 2 different frames; one billed as "permanent" and one billed as "portable" (i.e. easily removable). The permanent one wouldn't fit right in the space I had (wasn't the fault of the device), so I had to use the portable one. The permanent one is the one that's a big metal frame, and the portable one is the smaller frame + the plastic piece that looks kinda like a spider attacking the device. The portable mount is actually pretty flimsy and it is really hard to get the device in and out of it. Once you pull it out of the mount, it doesn't really want to go back in. So I just leave my device in all the time, and unplug it when I'm not using it. Fortunately, its really easy to plug and unplug from the electrical system, which is what I cared about. * Installation was confusing. This is my 1 year follow-up review so, unfortunately, I don't remember exactly why I was confused ... There was 1 wire that was really unclear where it connected. My Chevy wires were labeled a certain way and the device's manual described the wiring using very different language. I ultimately matched wire gauges to figure out which one goes where and that worked out for me. But there was an extended period of head-scratching where I was trying to figure out the wiring. Ultimately, it's a good device, but if the portable mount was a little easier to use I'd give it a 5 star. Because its kind of shoddy in that respect, I've got to mark it down a star. 358859



- 90195
by:

Excellent Product and Easy to Install. My truck (2008 Dodge Ram 1500) came with factory 4 wire Harness, not the 7 wire Factory harness. If yours comes with a 7 Wire harness Then Its a plug and play in a matter of 10 minutes. If yours is like mine and your a perfectionist when it comes to wiring and have any forethought of if you need to take a part or remove other things under the dash in the future and this wiring not getting in the way your looking at about 2-3 hours. If you want to use butt connectors and your looking at 1.5 - 2 hours. The wiring diagram is pretty straight forward. I went ahead and wired the auxillary line since the cable comes with 2 wires in it. I added some pics. The cold side of the brake light switch on a 2008 dodge ram is the tan/white wire. 527350



- 90195
by:

My F150 had an OEM 4 pin trailer plug and hitch. The 118242 - 7 pin connector with wiring harness is the ticket. The hardest part of the install was dropping the spare tire. The plugs connect directly to the factory plugs and the harness length is the correct length. The 3035-P brake controller connector harness was just as easy. Plugs right in to the OEM plug next to the ECM connector and the other end into the brake controller. The PK12711U-26 - 7 pin bracket and hardware kit fastens directly the OEM bracket that is on the hitch. My truck had an OEM 4 pin trailer towing set up with the hitch. The OEM hitch had the bracket welded on it to attach the 7 pin mounting bracket to it. These kits make this install very easy and professional looking. If I have one complaint, the hardware kit to attach the 7 pin connector bracket is set up to fasten the bracket directly to the bumper with 2 - self tapping screws provided in the kit. The kit also includes 4 #12 machine screws with toothed washer nuts to attached the 7 pin connector to the bracket. This is fine if your truck hitch doesn't have an attaching bracket welded to it. The kit should included in it 6 #12 machine screws and nuts along with the 2 self tapping screws. Since my OEM hitch actually had a bracket welded to it to attach the 7 pin bracket to it, I had to use two other #12 screws and nuts to attach the 7 pin bracket to the OEM bracket on the hitch. Not a big deal, just a thought. It took me about 2 hours, start to finish to install the 7 pin connector, trailer controller, and add the two relays in the OEM relay/fuse box under the hood. I highly recommend these kits. 322334



- 90195
by:

Installed this on my GMC 3500 Duramax with factory integrated brake controller. Not happy with the integrated brake controller on my truck, had problems from the start on 3 different occasions with "Service Trailer Brake" warning on DIC, which of course means NO TRAILER BRAKES. Decided the P3 was the perfect solution. Many more features than the IBC, plus the P3 will also work with electric over hydraulic disc brakes should we ever need that in the future. Fairly easy install on this particular truck, the most difficult thing was running the brake wire from the controller to the 7-pin plug. (This is only required when installing in a vehicle with a factory installed brake control) Well worth the extra effort. 39447


Comments

Recommendation...dont mount it to low out of reach. When you have a trailer go astray...your seat belt will tighten and then you cant reach your controller to help you out. Believe me I mounted my too low and out of reach, and I was seconds from ditching the truck and trailer. Was very lucky. Just a recommendation.

-- comment by: Ernesto - 04/26/2015

11166
Comments

What did you do to complete the bypass besides cut blue wire and wire to new brake control

-- comment by: Mel T - 11/11/2015

15856
Comments

Mel THere is the link that helped us, Good Luck https:/www.etrailer.com/question-43296.html

-- comment by: John S - 11/12/2015

15861

John thanks for responding to Mel's question. Happy to hear that Mike's expert question helped you out.

-- Rachael H - 11/13/2015


- 90195
by:

Great brake controller! I installed this unit in my 2016 Ford F250 4x4 in just over 30 minutes. Of course, I spent a little time (about an hour or so) in advance on the etrailer website researching how to install this controller. After watching a few videos and reading a few detailed reviews I was ready to go. I did order a plastic trim removal tool set on [site] prior to this installation. ** NOTE to etrailer: Think about offering a set of trim removal tools for sale to your customers - very important!**. I figured the $25.00 spent on the trim removal tool set would ensure no damage to the interior of my new truck and I was right. This is my second or third brake controller purchased from etrailer. Fast shipping and great products! Thank you!! 347873


Comments

Good news, Joe! We do sell trim removal tools and for less than you paid on the other site! They may be found at the following link:

-- Laura E - 03/11/2017

22685

- 90195
by:

Installed P3 this weekend in 2013 Tundra Crewmax with towing package and pre-wire. Extremely easy, even with the center console installation. Will let the photos tell the story. Did have to combine the P3 included harness with the additional OEM harness to gain the length I needed. Plug and play with the pre-wire. Hooked up to trailer and set boost levels for varying loads. Works great! Vast improvement over older model Tekonsha controller in my Ram 2500 Diesel. Pull a Kiefer BP horse trailer: about 3600 lbs empty, 7500 with 3 quarter horses and gear. Usually pull 6-8 times per year, with only 1-2 horses. Short distance and flat terrain. It took about an hour to install. Dad is a retired USAF/FAA radar technician with every tool known to man. He QC'd the job. Will try to write better review later. 96005


Comments

how hard is it to remove small center console plugin great installation thanks Mark

-- comment by: mark d - 11/14/2013

2314
Comments

To remove the small center console cubby hole you need to open both 12V outlets, then using your thumb and index finger, slowly work the cubby out. I used a very thin straight edge screwdriver to get it started as well. Helps to have two people. Once out, I used a rotozip tool to cut the back out. I thought I could get away with simply drilling a hole for the wires, but you will need more room. Recommend leaving a lip on the bottom edge where you cut out so small items dont fall behind your dash. Hope this helps.

-- comment by: Chris M - 11/26/2013

2350
Comments

Great write up Chris M. I just mounted mine and would like to make one note about the little yellow clips that hold in the console. They are very good at making a quick exit to some unknown location but I was able to fine the Toyota part number incase someone may need it. It is 90467-10203. They cost about a dollar. I got lucky and finally found the one I lost and saved myself a dollar.

-- comment by: Tim H - 02/12/2015

9463

- 90195
by:

Hi, I got my Item: 90195 and shipping was fast. I was able to get the break controller installed in my 2012 Cadillac Escalade Luxury using the etrailer.com video guide for a 2009 Cadillac Escalade. The install and wiring was the exact same as the video however my wires under the dash or wire bundle did not have a wiring sticker. The color of the wires were the same as in the video. This etrailer video is great and I used it to get my controller installed in about 1.5 hours. My install was trouble free. This weekend I was able to test out the my new P3 90195 controller and get it calibrated with my 29 foot travel trailer this weekend. Used a B2 setting with 8.0 power. The user guide and instructions you get with the controller help you know what settings to use and how to set the power level. This is my second controller as I got a P2 Tekonsha from etrailer about 4-5 years back and installed it in a 2007 trail blazer. This older 2P break controller is still working great. I have been rather happy with the quality of the Tekonsha controllers I have. I have not had to call etrailer for support or install questions but did receive a few emails from them to check in with me to ensure I got my shipment and offer me help. They do a good job supporting and responding to their customers and provide an A+ customer experience. 305014


Comments

All good on my end. The controller is working with no issue. Getting ready for our 6th camping trip this year. Thanks for your follow-up.

BradG - 10/09/2017

28915

- 90195
by:

We own a 2015 Ford F150 SuperCrew, 3.5 EcoBoost with Max Tow package. Of course, equipped like this, the truck came with a factory-installed, integral brake controller. That's good news. The bad news is that there various internet forums report there to be an unusually high failure rate of these factory controllers. So, being a bit paranoid about being out in the middle-of-nowhere in our truck and travel trailer and suddenly having (a) locked brakes, or (b) no brakes at all, I decided to install a high quality aftermarket controller. Based on company reputation and prior experience with Tekonsha products, I selected the P3 and proper 'plug and play' wiring harness. Following Tekonsha's instructions as well as vehicle-specific on-line videos, I found the installation to be super easy. I elected NOT to take the truck to the Ford dealer to have the computer re-flashed for the absence of the factory controller. Now, each time the truck is started, I have to click "OK" to clear the 'TRAILER BRAKE FAULT" message... to me that's no big deal. Also, when compared side-by-side, the Ford controller seems flimsy and cheap, whereas the P3 has a quality feel, fit and finish. Wanting the controller to be easy to see and easy to reach, I chose to install the P3 on top of the dash. So, I am delighted with the Tekonsha P3 and - as always - with etrailer's service. 400815



- 90195
by:

George J, Wanted to write good points about your customer service and the Tekonska braking system. Included are multiple pictures of the unit installed on my VW SUV. First off, I am not an expert in any way in installing and wiring. I had the good fortune of having Steve Kunzel, master mechanic at Westside VW in Minneapolis install the unit.(see Fig 1) The first unit sent did not function and was quickly replaced by etrailer.com at no charge. Second unit is pictured (fig 2) and works well. The trailer is used for caring dogs and gear to various dog events and hunting. The trailer weight is about 4500 pounds and the electronic braking system is necessary for good control of the SUV and trailer when braking. Thanks for all your help getting me up and running. 289246


Comments

Still works well.

Mark N - 08/30/2017

27737

- 90195
by:

Easy installation if you are the least bit handy electrically. Works as advertised with my 2001 4runner. Definitely the nicest piece of technology in my old truck! A trailer with good brakes feels like its not even there when stopping, even on steep downhills. I like that I can easily remove the unit from the clip mount and put it away from prying eyes when not in use. 572123



- 90195
by:

Just installed unit in 2008 Tundra Crewmax, took 45 minutes tops. Very intuitive to set up. Played around with the plastic slide in mount for a while, but finally decided to go with traditional fixed mounting bracket. Just felt more secure. Overall very pleased with product so far. Have not had an opportunity to use it towing trailer yet, but anticipate no issues. 568688



- 90195
by:

First, a huge "Thank You" to Janice!!! You are the best, and the main reason I am the proud owner of Tekonsha P3 Brake Controller! (see, I initially had an issue with my standard online payment service and almost canceled my order because of it) So I went old school and picked up the phone, one with a cord and spoke to a human being. Her name is Janice, and she made me feel confident that I could trust her and etrailer. And as a result, 4 days after placing my order with her I received my package. That's incredible. I am very happy and will most certainly do business with etrailer again in the future because of Janice. I don't have any experience with brake controllers. So I can't really comment on how much better or worse this one is to any others. But since I am new to the B/C scene maybe this can be considered an unbiased, non professional review of the Tekonsha P3. My general skill level is "requires supervision around all power tools". But I do have some mechanical ability (snicker). So I will just say, if I could install this thing anyone should be able to do it. Of course I also bought the OEM wiring harness for my vehicle so even I was able to figure out which plug went where. On A scale of 1 to 10 I give it a 3 (I'm somewhat large and getting under the dash wasn't easy or it would be a 1). And as others have said, deciding where to mount it actually took longer. I attached mine to the top of the lower dash cowl and it fits almost tight to the dash but still within the 180 degree limit. This positions the controller at the same height as my knee and puts it within fingertip reach while resting my hand on my knee. I can see the controller perfectly through the steering wheel spokes. I went with the green screen background. it seemed to provide the best view in all lighting conditions. The controller itself works perfectly and the set-up was a breeze. Once installed all the functions worked as described. The real time vehicle diagnostics are a plus. I like being able to monitor my battery voltage to the decimal place if I want to. I'm sort of a techno geek so this is really cool. I set the B/C voltage per the instructions and will only use the boost feature if I am in a hurry or feel the trailer is at max load, but my truck is 8k lbs so you may want to set yours to suit your own conditions. I highly recommend the Tekonsha P3 brake Controller if you want the latest and probably the best controller out there in this price range. I highly recommend the OEM wiring harness if your skills are not pit crew comprable and want the easiest install possible. And, I highly recommend you buy it from etrailer if you want to get it at the best price available (I checked them all) and want the added security you're buying from one of the best online retailers that sells this product. And do yourself a favor, go old school for a change, use the phone and call them, and ask for Janice, although I'm willing to bet everyone there is as nice as her. Rob 12695


Comments

How long is the wiring harness? I want to mount the brake controller on the right side of my steering wheel. It looks short in the picture. Thanks! Tom

-- comment by: Tom - 09/14/2015

14938
117
3722
Show More Reviews

Ask the Experts about this Tekonsha Brake Controller

Do you have a question about this Brake Controller?


  • Hooking a Gooseneck Trailer with RV 7-Way Plug to 1999 International 9100 7-Way Round Plug
  • The first thing that you need is the Pollak Trailer Connector Adapter # PK12-724 which converts the 7-Way round connector on your 1999 International 9100 to a 7-Way blade style connector. This will plug into your 9100 and provide a pace to connect the gooseneck trailer wiring. The next step is to then use the Roadmaster Brite-Lite Wiring Converter # RM-732 on your trailer side wiring right behind the 7-Way. This converter takes separate brake and turn signals and combines them so that...
    view full answer...

  • Will the Tekonsha Replacement Vehicle Wiring Harness Fit a 2018 Dodge Durango W/O Trailer Wiring
  • The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter part # TK22113 is specifically designed to be used with a 2018 Dodge Durango that did not come with trailer wiring. The harness offers almost an entirely plug and play installation that will not require you to splice any wires. If you also need a brake controller I recommend using the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 as this is our top of the line best selling brake controller. The...
    view full answer...

  • Brake Controller Installation in 2017 Chrysler Pacifica
  • For your 2017 Chrysler Pacifica with tow package, I recommend the Tekonsha Prodigy P3 # 90195 for a brake controller. It has a really nice LCD screen to make it user friendly and has preset options for different trailer sizes for a good fit. You are correct that there is not a plug and play harness for your Pacifica, so it will need to be hardwired. If you don't already have a 4-way flat trailer connection, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
    view full answer...

  • Comparing the Redarc Tow-Pro Elite vs Tekonsha Prodigy P3 Brake Controller
  • The RedArc Tow-Pro Elite # 331-EBRH-ACCV2 is comparable in reliability and performance to the Tekonsha Prodigy P3 # 90195. The difference is really in the design and features. One of the greatest aspects of the P3 is the LCD screen and presets. One of the greatest aspects of the Tow-Pro Elite is the size and mounting location. Both have very usable features and use different methods of communication for diagnostics and modes. Both have the manual override options and are top of the...
    view full answer...

  • Which 4-Way to 7-Way Trailer Wiring Adapter Allows Trailer Battery Charge Circuit to Activate
  • Since your plan is to install a brake controller and want to charge the camper battery what you need is actually the part # ETBC7. This comes with basically the same things as the # ETBC7L except it also includes wiring and circuit breaker to complete the brake controller circuit that you use for charging the trailer battery. I attached a video that shows this kit installed on a similar 2011 Subaru Outback for you to check out as well. The brake controller in the video is our best selling...
    view full answer...

  • Comparing Curt Class III Hitches C13395 & C13171 for 2019 Jeep Cherokee Towing Teardrop Trailer
  • The two Curt Class III hitches made for your 2019 Cherokee, parts # C13395 and # C13171, differ primarily in their installed appearance. Hitch # C13171 will install such that its main cross tube is visible under the bumper cover while model # C13395 has a concealed cross tube that is more hidden. If you refer to the two linked photos you can see the difference; the blue vehicle has visible hitch # C13171 and the red one has the concealed hitch # C13395. The difference in weight ratings...
    view full answer...

  • Brake Controller and 7-Way Recommendation for 2019 Jeep Wrangler Unlimited
  • To install a 7-way and brake controller in your 2019 Jeep Wrangler Unlimited first requires you to install a 4-way connector part # 118786 which provides all of the trailer lighting functions and then convert to a 7-way with the part # ETBC7 which the 4-way plugs into and comes with everything needed to wire up a brake controller. I attached an install video for this kit on a similar 2012 Jeep Wrangler Unlimited as yours for you to check out as well. For a brake controller I would recommend...
    view full answer...

  • Installing 7-Way on 2017 Chevy Express Van
  • To install a 7-blade in your 2017 Chevy Express van, presumably for a brake controller, you are going to need to do some hard wiring. For a brake controller the first thing you'll need is to add 4-way # 118392 and I've added a link to a video showing how this is installed in a '17 Express. Then to add a 7-way you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7; I have also added a link to a video showing a brake controller being installed in a similar Express...
    view full answer...

  • Tekonsha P2 vs P3 Brake Controller Recommendation for 2013 GMC Yukon
  • If you have never used a brake controller before, the P2 # 90885 will be easier to learn on and use than the P3, # 90195 initially. The P3 has several features the P2 doesn't including the ability to change the LED screen color, change the language, and the biggest difference is the diagnostics. Instead of flashing a code you would have to look at the P3 has clear messages telling you what the problem is. Other than that the controllers function in the same way and mount in the same...
    view full answer...

  • Recommended Complete Disc Brake Conversion System For 10,000 lb Dexter Axles
  • To replace your leaking seals, you will want the Unitized Oil Seal # 10-51. This is a confirmed fit for your hubs. I've attached a video of an oil seal installation on a similar hub to help. For your disc brake conversion, you will need to use the Dexter Trailer Hub Assembly - 9,000-10,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-288-3UC1 and then the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - Raw Finish - Leaf Spring - 10,000-lb Dexter # K2R1058D11E compatible with these hub assemblies...
    view full answer...

  • Wiring Harness To Use With EcoHitch Hidden Trailer Hitch Receiver For 2017 Volkswagen Golf Alltrack
  • If you need a 4-Way connection, this Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56391 features a combined wiring system with pulse width modulation. The brake, tail light, and turn signals are sent along the same wire and signals are sent as pulses which need to be deciphered. It allows you to quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter...
    view full answer...

  • Installing a 7-way Trailer Connector on a 2018 Subaru Outback
  • We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific customer harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with a plug and play 4-way and then convert it. I recommend using the Tekonsha, part # 118467, for the 4-way. It plugs in to a connector that's either behind a trim panel in the rear cargo area on the driver's side or in the spare tire compartment....
    view full answer...

  • Adding 7-Way and 4-Way Connectors to a 2018 Toyota Tacoma Without the Tow Package
  • The best (and easiest) wiring kit that we have for your 2018 Toyota Tacoma (without the tow package) is the Tekonsha OEM Replacement Vehicle Wiring Harness # 22117. This comes with everything needed to add a fully functioning 7-Way and 4-Way on your pickup. It connects your basic lighting functions with the T-Connectors that you mentioned and has the rest of the wiring bundled in a loom to make running them up to your cab/engine compartment much easier. This kit even comes with a pigtail...
    view full answer...

  • 7-Way Trailer Connector for a 2017 Mercedes-Benz Sprinter 2500
  • In order to install a 7-way trailer connector on the rear of your 2017 Mercedes-Benz Sprinter 2500 you will need to use the T-One Vehicle Wiring Harness part # 118649 with the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. Unfortunately, they do not make a wiring harness that splices into the taillights and give you a 7-way trailer connector therefore this will be your only option. If you will be towing a trailer with brakes then you will still need to use part # 118649 but instead...
    view full answer...

  • Recommended Trailer Hitch Receiver, 7-Way Trailer Connector, and Brake Controller on 2017 Tacoma
  • Sounds like you're trying to build your own tow package on your new 2017 Toyota Tacoma. We can certainly help you with that. We'll begin with the hitch receiver. I suggest the Draw-Tite # 75238. It's a Class III, 2 inch hitch with a gross trailer weight of 7,000 pounds and maximum tongue weight of 1,50 pounds. Higher than a lot of Class III hitches. It's a fairly straight forward installation because it bolts right to your truck's frame. For a wiring harness to get power to your...
    view full answer...

  • How to Determine if a 2018 Toyota Highlander has a Tow Package
  • To send me your picture you can just reply to me here. To me that connector you found sounds like where you need to plug a converter in which would mean you don't have the tow package. Look at the picture I've attached. If it looks like this will plug into the connector you found then that's what it is. It shouldn't be a connector for a brake controller because your 2018 Toyota Highlander doesn't have a custom adapter to install a controller. If this is what you need then I recommend...
    view full answer...

  • Brake Controller Recommendation for 2009 Toyota Tundra
  • For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well. Then to install it in your 2009 Toyota...
    view full answer...

  • Installing Trailer Brake Controller on 2017 Ford Transit T250
  • There is not a plug-in adapter available for the 2017 Ford Transit T250 that will allow for a plug and play trailer brake controller installation. A brake controller, such as the excellent Tekonsha Prodigy P3 # 90195, will just need to be hardwired to the vehicle using the wires beneath the brake pedal. If the vehicle did not come with the factory tow package or 7-Way connector, you will also need the Tekonsha Vehicle Wiring Harness # 22114. This will include everything needed to install...
    view full answer...

  • What is the Best Way to Tow a 2012 Fiat 500 Behind a Motorhome
  • According to the owner's manual for a 2012 Fiat 500 with a manual transmission (excluding 500c and 500 Abarth), the vehicle can be flat towed with all four wheels down and dolly towed with either the front two or rear two wheels off of the ground. In regards to which is better between flat-tow and dolly tow, they both have their benefits. If you have a leased vehicle or don't want to make any modifications as you plan to exchange it, dolly tow would be your best option but if you plan to...
    view full answer...

  • 2018 Ram 2500 Diesel Brake Controller Installation
  • Yes. The Integrated Trailer Brake Module (ITBM) will need to be disconnected by your local Ram dealer to allow your 2018 Ram 2500 Diesel to use an aftermarket trailer brake controller. If you don't have a controller, I recommend the Tekonsha Prodigy P3 # 90195 along with wiring harness # 3024-P. I've attached a video to assist. Let me know if you have further questions.
    view full answer...

  • Installing a 7-Way Trailer Connector on a 2017 Subaru Outback Wagon
  • That is correct for your 2017 Subaru Outback we only carry 4-way trailer connectors that are a direct fit. However, once you install the 4-way it can be converted to a 7-way, if that's what your trailer needs. Of the 4-way connectors for your Outback I recommend the Tekonsha # 118467 because we always have great success with them. To install the harness you'll need to locate the factory connector in the Subaru's rear cargo area. Then install the included fuse. I've linked an install...
    view full answer...

  • Recommended Brake Controller For 2018 Honda Pilot
  • For your 2018 Honda Pilot I recommend a proportional brake controller. With a proportional brake controller # 90195, you can get heavy-duty emergency braking, general braking or slow-to-an-idle braking for your trailer automatically. The intensity with which your trailer brakes are activated and the rate at which they are applied are dependent on the deceleration of your tow vehicle. This means that, unlike time-delay controllers - which send the same amount of preset power to your trailer...
    view full answer...

  • Recommended Trailer Wiring And Brake Controller For 2017 Toyota Sienna
  • The best way to get a 7-way trailer connector on your 2017 Sienna is by first installing a 4-way connector like part # 118498 if it is an SLE model or part # 118648 for NON-SLE models. You will then need to install a 7-way trailer harness like # ETBC7. This plugs into the 4-way and you can hardwire the additional wires as needed. Many times a 7-way is needed because the trailer has brakes which would also include needing a brake controller in the vehicle. If that is the case, I...
    view full answer...

  • Recommended Brake Controller for 2018 Tiffin Allegro Motorhome
  • For your 2018 Tiffen Allegro motorhome, I recommend the Tekonsha Prodigy P3 Brake Controller # 90195. This is a proportional controller that will allow you to apply trailer brakes at the same time and with the same amount of force as you hit the brake pedal in your motorhome. This controller has an easy to read LCD screen that take code deciphering out of the equation. Your motorhome will have a factory wiring harness. This plug is normally located beneath the dash, near the center...
    view full answer...

  • 2019 Subaru Ascent 4-Way and Brake Controller Install Kit
  • Your 2019 Subaru Ascent should have came with a 7-way installed at the rear of it if it came with the factory towing package. Since you are having a hitch installed currently and looking at wiring you most likely do not have the towing package and would need to install the correct wiring. You have to start with a 4-way for this like the # 118790 as this will be the base for the 7-way conversion needed to install and use the brake controller. Since normally this 4-way kit stores in the rear...
    view full answer...

  • How to Add a Trailer Connector to a 2018 Jeep Grand Cherokee
  • I do not believe all 2018 Jeep Grand Cherokees came with a factory trailer connector. In order to add one you will want to first look under the vehicle's rear bumper near the spare tire for a USCAR car plug which I have attached a photo of for you. The plug may be taped to an existing wiring harness. If you have this plug then you can use part # C55384 to add a 4-way trailer connector or part # C55774 to add a 4 and 7-way trailer connector. I have attached install videos of both harnesses...
    view full answer...

  • Parts Needed to Equip 2017 Mercedes-Benz Sprinter 2500 with 7-Way and Trailer Brake Controller
  • We have 2-inch Class III trailer hitches for your 2017 Sprinter 2500 that you can view on the linked page. Their fits depend on the van wheelbase and bumper style. You can use the drop-down Select Vehicle Style menu tool to choose your specific configuration. Please note that Sprinter frames that measure 30-3/8-inches between the outsides of the frame rails have no confirmed hitch options. Towing capacities vary slightly among the hitches available; for a van without the factory step...
    view full answer...

  • Parts Needed to Install 7-Way on 2011 Nissan Pathfinder
  • If your trailer does not have brakes your best and easiest route would be to use the adapter part # 37185. Your 4-way plugs into it's 4-way and you have both a 4-way and 7-way with just taillight functions. If you need trailer brakes you'll need quite a few more things. To star you'd need the part # 118281 for a 7-way. But you'd need to swap out the socket to the part # HM40975 as it will install and give you both the 4 and 7-way. For a brake controller I would recommend the Prodigy...
    view full answer...


Do you have a question about this Brake Controller?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality brake controller for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate brake controller information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video by:
Joe V
Expert Research:
Jackie C
Expert Research:
Michael L
Video Edited:
Zack K
Expert Research:
Sarah L
Video Edited:
Andrew K
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Test Fit:
Rick A
Expert Research:
John H
Video by:
Patrick B
Expert Research:
Brandon M
Video Edited:
Andrew L
Expert Research:
Adam R
Video Edited:
Kathleen M
Video Edited:
Mike H
Updated by:
Laura H
Video Edited:
Dustin K
Test Fit:
Shane T
Expert Research:
Lori W
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video by:
Alan C
Video Edited:
Sue W
Test Fit:
Randy B
Video Edited:
Chris R
Expert Research:
Sarah H
Test Fit:
Joe B
Updated by:
Sarah W
Test Fit:
Jared G
Updated by:
Alexander C
Expert Research:
Victoria B
Test Fit:
Matthew S
Video Edited:
Zach D
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Video by:
Jonathan Y
Video by:
Robert C
Test Fit:
David F
Video by:
Michael B
Test Fit:
Jacob H
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.