Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
(69 reviews)
Price: $319.94
In Stock
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
Item # T43397007K
Our Price: $319.94
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (69)
- Q & A (0)
- Photos
- Why etrailer?
Dexter Brake Actuator - T43397007K
- Surge Brake Actuator
- Drum Brakes
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- 7000 lbs GTW
- Bolt-On
- No Lockout
- Straight Tongue Coupler
- Dexter
Easy and convenient turn-wheel latch lets you fit the coupler on this corrosion-resistant, surge-type actuator to a hitch ball measuring 1-7/8", 2" or 50 mm. Designed for use with drum trailer brakes.
Features:
- Hydraulic actuator synchronizes trailer brakes with tow-vehicle brakes
- Easily adjustable to fit 1-7/8", 2" and 50-mm balls
- Turn handwheel to tighten coupler around ball
- Breakaway kit included
- Zinc plating provides corrosion resistance
- Durable steel construction
- Bolt-on installation
- Bolt holes 3" apart on center
- Mounting hardware not included
- Made in USA
Specs:
- Application: hydraulic drum brakes
- Ball size: 1-7/8", 2" or 50 mm
- Some adjustment may be required
- Mounting: 3" wide channel tongue
- Capacity: 7,000 lbs
- Maximum tongue weight: 700 lbs
- 1-Year warranty
When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle. With surge brake systems, the actuator is triggered as your trailer moves forward while the tow vehicle slows. The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes.
068-139-01 Dexter Axle Model 60 ZX7000 Multi-Fit Actuator for Drum Brakes - Zinc
Replaces Titan T4339700 and 43397007K
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Defective
- Product did not meet expectations
Customer Reviews
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs - T43397007K
Average Customer Rating: 4.5 out of 5 stars (69 Customer Reviews)
Easy and convenient turn-wheel latch lets you fit the coupler on this corrosion-resistant, surge-type actuator to a hitch ball measuring 1-7/8", 2" or 50 mm. Designed for use with drum trailer brakes.by: Chuck11/04/2022
Not a fan because of the screw down and up for ball attachment. Unit Itself works great.
by: Hoby08/11/2018
Direct Bolt on, better than welding. Surge Brake Line connected just fine. Bled Brakes. Test drive was successful. What more could you ask for. I chose the hand tightening knob over the Lever because it was more assuring to me that it was tight on the ball and the locking mechanism has never failed. I have used Titan surge actuators for 40 years. I am using this actuator on a 4,000 lbs. boat and trailer. On my way to the lake!
by: Steven 08/05/2022
Very easy to install, I took the old unit off and had the new one installed in less than an hour. I hooked the trailer to my truck and primed the Hydraulic cylinder before I attached the brake line. No problems.
by: Pete 10/05/2022
Seems to be what I needed to have replaced, was easy to install. Only problem, NO instructions. I did find video suggestions online.
by: Tony09/05/2022
Arrived corroded and not functioning properly. I had to disassemble and clean the rust that was on the inside of the fluid reservoir and the piston. I would have sent back but I needed it at the time. The piston was frozen. It took some time for me to figure this out.
by: Pam06/16/2022
The part was a perfect fit and the service was prompt and friendly. I had a question and the person on live chat was friendly and helpful. I would definitely use etrailer again
by: Bill04/26/2022
The master cylinder leaks around the ca p.
Comments
You mentioned that the master cylinder is leaking around the cap. I suggest replacing the cap and we do have it available. It is part # T4480701
Replacement Master Cylinder Filler Cap for Dexter Model 60 and Aero 7500 Actuators
$14.94 on our site.
-- Replacement Master Cylinder Filler Cap for Dexter Model 60 and Aero 7500 Actuators
$14.94 on our site.
Jenny N - 05/02/2022by: Jonathan 10/28/2022
Perfect replacement. Easy to install.
by: Robert09/16/2022
DO NOT...I REPEAT DO NOT BUY THIS PIECE OF JUNK (I have stronger words but you get the idea) You get this piece of junk and ZERO info. I'm going to stop reviewing now before I go off the deep end!
by: Rusty 08/26/2022
Looks great ! But a Little high priced
by: Melissa 09/28/2022
Fast and correct part.
by: Greg 06/25/2022
It mounted in the same holes my old unit was removed from great fit.
by: Paul P05/16/2015
Bolted right onto the trailer. No instructions and the link on the web sit didn't work but what do you need for two bolts. Wouldn't have minded some guidance with bleeding the brakes but got it done anyway.
Greatly improved the towing of my boat trailer!
Good price. Shipping good. What else would you want!?
Comments
Well, it worked great till I sold the boat last October. Shocked about the follow-up! Wow
Paul P - 06/07/2016by: Steve 07/05/2021
Perfect replacement for my existing brake. I'm using this brake coupled with the Titan actuator W/reverse lockout solenoid since there is no manual lockout and I don't have free backing brakes.
by: Chris Webb06/01/2022
Ordered for item repair at our plant. Ordering was easy and shipping was good.
by: Blake04/30/2021
This product perfectly replaced my tongue master cylinder on my 1992 Capri boat trailer. It bolted right up and the brake line thread was the same. It was super easy. It is a huge improvement!
by: Rich T09/12/2019
Excellent product. This was almost an exact replacement for the original one that was on my boat trailer. I had the boat out about once a week this summer and the actuator worked perfectly. Braking was smooth and it locks down easily on the hitch ball. I highly recommend this actuator.
by: Dave C.02/12/2015
Fast delivery & looks like the right brake actuator will install later this spring boat in storage. Very good service will recommend my friends to your company. Thanks for your help David Castle
Comments
Its working great replaced my 26 year old brake actuator
Dave C - 02/12/2016by: George O11/17/2017
good stuff, nice product, shipped fast, exact fit / this is just what I wanted I had questions called and asked and got answers / the price couldn't be beat I tried other on line and local stores / am a happy camper I would buy here again.
George O
by: Larry F10/07/2016
I cannot say enough about etrailer!! I ordered my part at a much cheaper price than I would have paid locally, it was mailed the same day and I got it three days later!! When ordering, I spoke to Shawn who was very professional and very precise in my wishes......she made me feel like a very valuable customer!! The part arrived in perfect shape and was easy to install. I would not hesitate to order from etrailer again!! Keep up the good work!!
by: JIMB04/27/2017
Just as shown online product fit perfect great to see a company that has great service and low prices. I will buy again when I need something. Brake actuator looks exactly like my old one saved a lot of time and money.
by: Eric03/08/2018
Wow.. I’m impressed!! Super fast shipping and pro packaging.. hitch exactly as described! Thank you and yes, I’ll be back
by: Curtis 06/03/2021
Nice part. Easy installation.
by: Jim B.12/08/2015
Thank you guys at e trailer, great service, good prices and was a pleasure doing business. Will definitely shop here again for all my trailer needs.
25
69
Show More Reviews
See what our Experts say about this Dexter Brake Actuator
- Will the Titan Zinc-Plated Brake Actuator # T43397007K Activate 4 Brake AssembliesYes, as long as the brake assemblies on your trailer are drum brakes the Titan Zinc-Plated Brake Actuator # T43397007K will work activate 4 brake assemblies. I attached a review video for this actuator for you to check out as well.
view full answer... - Testing A Hydraulic Coupler and Bleeding a Hydraulic Brake SystemWe have a video that shows how to bleed a brake system, click on the link provided. You will need a helper, a length of rubber tubing that will fit onto the bleeder valve and a clear plastic or glass bottle. I prefer a glass bottle because it is easier to see through glass. Start with the brake furthest from the actuator, and open the bleeder screw and allow it to remain open while your helper pumps the actuator until you see brake fluid free of air bubbles coming out of the bleeder screw....
view full answer... - Does a Hydraulic Trailer Brake Actuator Have to be Primed for UseThe brake actuator, # T43397007K, does not have to be primed. After you have replaced the parts needed and reconnected the brake lines, you will fill the reservoir with DOT 3 brake fluid, leave the cap off, and proceed to bleed the brakes. I have included a link to a video that shows how to bleed the brakes manually. I have also included a link to the replacement actuator parts and a link to wheel cylinders we carry.
view full answer... - How to Bleed Hydraulic Surge Trailer BrakesThere are a couple of ways you can bleed a trailer brake system. Titan offers the following instructions, which I have also linked for you, on bleeding the brakes: Remove the master cylinder cap and fill the reservoir to three quarters full with DOT-3 brake fluid. DO NOT allow brake fluid to contact painted surfaces since it will damage the finish. Wipe up any spills immediately and wash the area with water. If you choose to manually bleed the system, an assistant makes the job easier....
view full answer... - Compatibility of Titan Hydraulic Actuating Coupler on Military Trailer with Automotive Drum BrakesIf your military trailer has a 3 inch channel tongue, and its Gross Load (trailer plus weight of its contents) does not exceed 7000 lbs, the Titan # T43397007K would indeed work with the automotive-style drum brake system on your trailer.
view full answer... - What Size and Grade Bolts Should be Used to Install Titan Model 60 Brake ActuatorThe Titan brake actuator # T43397007K will take 1/2 inch by 4 inch grade 5 bolts, nuts, and lock washers. Since this is a boat trailer if you can find some grade 5 zinc coated or stainless steel they will have better corrosion resistance. I have linked a video review and the installation instructions for this actuator for you.
view full answer... - How Many Drum Brakes Assemblies Can be Operated by Titan Zinc-Plated 7K Brake ActuatorThe Titan Zinc-Plated 7K Brake Actuator # T43397007K that you referenced can handle the four hydraulic drum brake assemblies on your tandem axle trailer. This bolt-on actuator includes an electric reverse lockout solenoid (and a solenoid shield to protect it) as well as a built-in breakaway kit. It will fit 3-inch wide trailer tongues and has a multi-fit coupler to allow use with three sizes of hitch ball, 1-7/8-inch, 2-inch and 50 millimeter. I have included a review video to help illustrate...
view full answer... - How to Pump Master Cylinder on Surge Coupler to Allow Bleeding Hydraulic Drum Trailer BrakesA surge coupler for actuating hydraulic drum brakes, such as Titan # T43397007K, can be pumped for purposes of bleeding the brake lines by using a 2 x 4 or similar piece of lumber to compress the coupler. The linked photo shows the general arrangement for doing this, which includes using the trailer safety chains for leverage. The complete instructions for Titan coupler # T43397007K are linked and these include a detailed procedure for bleeding the system using this wood-with-chains method.
view full answer...
- How to Pick out a Surge Brake Actuator for a M105 Military TrailerThat really depends on the weight of the trailer plus the weight of any cargo you plan on putting in that trailer. I would recommend you check out the link I attached to the right that shows all of the Titan actuators we carry, select the weight capacity you need from the facets on the left and then select any of the couplers listed and you should be good. I also attached an FAQ article on adding hydraulic drum brakes to a trailer, as well as an article on adding hydraulic disc brakes...
view full answer... - What Parts Are Needed To Add hydraulic Brakes To Boat Trailer For 2002 Skeeter Bass BoatIn order to add brakes to your trailer for your 2002 Skeeter Bass Boat, we will need to know what your trailer currently has. You will need to know the axle weight capacity. There is normally a plate or sticker on the axle that lists the weight capacity. If you are unable to find that, you can get the numbers from the bearing and seal to determine what size axle you have. I have attached a photo that shows where you can typically find the bearing and seal numbers. I have attached a helpful...
view full answer... - Troubleshooting Hubs and Drums Heating Up on Boat TrailerA bad shock/damper and over adjusted brakes could be the cause of your problem. However, I would start off by checking to make sure that the spindle nut wasn't tightened down too tightly after replacing the bearings and seals. You should tighten the spindle nut until it is tight and then back it off one 1/4 turn. If this doesn't correct your problem, you could try backing off of the pad adjustment to see if this will help.
view full answer... - Installation Instructions for the Titan Zinc-Plated Brake Actuator # T43397007KI attached a link to the right that contains detailed installation instructions for the Titan Zinc-Plated Brake Actuator # T43397007K that you can use as a guide to install this coupler on your 1994 Maxum 20 foot boat trailer.
view full answer... - Will Titan Zinc-Plated Brake Actuator # T43397007K on a 4 Inch Long Tongue 3 Inches WideThe mounting hole spacing for Titan Zinc-Plated Brake Actuator # T43397007K is 3 inches on center. Since you have 4 inches it will work! I have included a link to a video review of this product for you.
view full answer... - Recommended Replacement Actuator For Fulton A50 On 2007 EZ Loader TrailerMy contact at Fulton confirmed that the A50 series is now obsolete and they don't make replacement parts. For a replacement, I recomemend the Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7K # T43397007K. This surge brake actuator will help make your 2007 EZ Loader Trailer functional again.
view full answer... - How to Properly Bleed Trailer BrakesWe have exactly what you are looking for. I have attached a detailed demonstration video on bleeding the brakes on a trailer for you to check out. As a general summary, you will first top of the master cylinder with appropriate fluid. To pump the fluid from the master cylinder, you can unbolt the plate that holds the lever into place and then use the lever to actuate the master cylinder and force the fluid through. Next you will find the bleeder valve and open it. Take a rubber hose,...
view full answer... - Master Cylinder is Not Pumping FluidIf your actuator, like part # T43397007K, is new and you are testing the master cylinder without it being in the fully assembled actuator then that would be your problem. If your actuator is not new then you will want to look for any clogs in the brake line. There should be fluid moving through the line even with it being disconnected from the brakes. Try cleaning the brake line and if that doesn't help let me know and I can help you to troubleshoot further.
view full answer... - Replacement Surge Brake Actuator For 1979 Rolco Boat TrailerIt sounds like you need to replace the brake actuator on your 1979 Rolco trailer. When you say the hitch portion are you asking about a surge brake coupler on the trailer? These were used a lot on trailers from that time. I have attached a link to our product page for the surge couplers we offer. As you can see on the page, choosing the right coupler will depend on the size hitch ball you use and also the trailer tongue channel size. Also, the couplers have a weight capacity and vary by...
view full answer... - Tie Down Model 66 Surge Brake Coupler ReplacementYour Tie Down Model 66 can easily be replaced by one of our actuators. The Titan part # T43397007K would be a great drum brake option that has a 7,000 lb capacity and can fit 2 inch or 1-7/8 inch hitch balls.
view full answer...
- How to Bleed Air from Titan Zinc-Plated Brake ActuatorOn the Titan Zinc-Plated Brake Actuator # T43397007K you can get access to the plunger for purposes of bleeding the system of air by removing the plate that surrounds the breakaway lever and by removing the front plate with the logo. You can then manually push the lever to pressurize the system and bleed out any air in the lines. It is also possible to bleed the brakes by using a 2x4 piece of lumber as a lever to compress the actuator to apply pressure to the system.` You may care to...
view full answer... - Will Titan Brake Actuator part # T43397007K Replace a Tie Down 70E ActuatorYes, the Titan brake actuator part # T4339720 that you referenced will easily replace the Tie Down actuator you have now. The fitting size is the same. I attached a review video for this actuator for you to check out as well.
view full answer... - Can Reverse Lock Out Solenoid be Left On Titan Model 60 If Never NeededIf you never plan to use the reverse lock out solenoid that comes with some of the Titan Model 60 actuators you could remove it if you wanted to, but if you never wired it up you could just leave it on there and it wouldn't ever activate or cause issue. The solenoid is normally open so it wouldn't close on you at any point if never wired up. If you are purchasing a new coupler, I recommend simply getting one without the lockout solenoid like # T43397007K for example because it is one less...
view full answer... - Availability of Replacement Parts for Brake Actuator on 1999 Heritage Tandem Boat TrailerIn order to recommend a replacement master cylinder, I'd need to know the manufacturer and model number of the existing brake actuator. We carry replacement master cylinders for certain Titan, Dico, Atwood and Demco brake actuators. If parts are available, it might be feasible to replace parts as needed, but this will depend on the age of the actuator and the availability of parts. The brand name of the trailer isn't as helpful as you'd think, as there's no master reference showing which...
view full answer... - Coupler Replacement for Tie Down Model 66 ActuatorYour Tie Down Model 66 can easily be replaced by one of our actuators. The Titan part # T43397007K would be a great drum brake option that has a 7,000 lb capacity and can fit 2 inch or 1-7/8 inch hitch balls.
view full answer... - Could Surge Actuator part # T43397007K be Welded onto TrailerYes, the coupler part # T43397007K that you referenced could easily be welded onto your trailer. However, this coupler is zinc plated so it would need to be welded in a very well ventilated area.
view full answer...
Do you have a question about this Brake Actuator?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate brake actuator information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Written by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Jenny M
Updated by:
Hannah L
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-833-496-1390
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.