This flex mount doubles as a portable 14" handle or an iPad or tablet holder. Vacuum cups mount to most non-porous surfaces and to the back of your tablet, without need for a special bracket and without drilling. Includes travel case.
Features:
Specs:
You can use this flex mount as a portable handle, or as a tablet or iPad holder. The bendable arm lets you position your tablet so that it's accessible when you need to keep both hands free. The long, flexible arm also lets you position it as needed when using the mount as a handle. To use it as a tablet holder attach one cup to a non-porous surface and the other cup directly to the back of your tablet. To use it as a temporary handle attach both cups to the side of your boat, your shower wall, or any other surface where extra leverage is needed.
The vacuum cups mount and remove in seconds. To install the flex mount make sure the mounting surface is clean and place the vacuum cups on your desired surface then press the pump several times until the orange band disappears. To break the seal and remove the flex mount simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna be taking a look at the SeaSucker Flex Mount Handle. It's available in black with two flex rods, part number 302-6219, in white with two flex rods, part number 302-6218, and in black with one flex rod, part number 302-6204, and finally in white with one flex rod, part number 302-6203.The SeaSucker Flex Mount is perfect for creating a temporary handle wherever you might need one. You can use it for getting in and our of your boat or as a temporary handle on your RV. You can use it to hang items on your RV or boat to dry. Using just one of the seven inch rods makes a great mount for your tablet. As you can see the vacuum cups are able to adhere to the smooth surface on the back.Now that we've got all the features I'll go ahead and show you how to use them.
We've got two different options to mount our rod depending on our need. If you have two rods they easily thread together to create one long one. Now we can attach it to either the side or the top of our vacuum cup. Now we can go to wherever we need a handle, we want to make sure that the surface we're mounting it to is free of any dirt of debris. Then we'll want to moisten the bottom of our vacuum cups, we can go ahead and push it in place, and then begin depressing the pump cylinder until the orange band disappears.We have two cups, each with a 120 pull strings.
Over time if the orange band reappears, no problem, just depress the pump cylinder a few times until it disappears and you're all set to go again. Also included is some multi purpose lubricant sealant, this is to help maintain your pump cylinder. Just put a little bit on the edge here, depress the pump cylinder until it works its way in and you're all set. They're very easy to remove, simply press down on one of the T-tabs on either side and they easily come off. It comes with a hard storage case so you can stow them when not in use.And that's gonna complete our look at the SeaSucker Flex Mount Handle..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.