CycleOps Fluid² Turbo Bike Trainer

Video Transcript for CycleOps Fluid2 Turbo Bike Trainer Review

Today we'll be taking a look at the CycleOps Fluid2 trainer, part number CY9904. Ride with one of the best selling bike trainers in the US. The Fluid2 helps you get the most out of your training regardless of the time, temperature or traffic. The large precision balance flywheel creates the same inertia riders feel on the road and the flywheel keeps spinning when you stop pedaling to simulate coasting. Fluid inside the casing heats and expands creating resistance as you pedal faster. The patented design channels one hundred percent of the air intake to cool the fluid and maintain that smooth, road like feel. The fluid too is power to and for optimal performance.

It's going to fit 650B, 700C and twenty six inch through twenty nine inch wheel sizes with a tire width of up to 2.25 inches and the whole thing is a three hundred pound weight capacity. Some additional accessories to round out your CycleOps experience, a Bluetooth virtual trainer, part number CY30319, a leveling block, part number CY9702, a riser block, part number CY9701 or a trainer tire, part number CY9710. The CycleOps Fluid2 comes with a limited lifetime warranty. This is also available in a Fluid2 training kit that includes two climbing blocks, a training mat and a sweat guard, part number CY9905 and a Fluid2 power training kit that includes a power tap, power cowl, and a jewel cycling computer to read data, part number CY9906. Now that we've gone over some of the features, I'll go ahead and show you howto get your bike installed on the trainer. We've already got our included skewer installed on our bike here as you can see and we've already got our adjustment set up for our bike here today. Let's grab our bike, we'll set it between our trainer.

We've got three adjustment levels here, so you can adjust it to fit your bike. Let's just lift it up, we'll put this into the skewer end first until it just kind of sets in there like that, then we'll take the bolt action lever and close it up on this end of the skewer until it fits in it just like that and we're going to close it up all the way until it locks into place, just like that. Then, we can come on down to our resistance wheel and we're going to turn this yellow knob clockwise until it clicks two times, that's how we know it's got good and the proper contact that we have on the tire. Just keep turning until you hear those clicks and there we go. Finally, our two feet here at the bottom are adjustable if we're working with an uneven surface. You just give them a slight turn to the left or right and make sure that it's level and that's going to complete our look at the CycleOps Fluid2 bike trainer, part number CY9904..