Slime 4-Way Tool and Valve Cores Set

Video Transcript for Slime 4-Way Tool and Valve Cores Set Review

Today we're going to take a look at the Slime 4-Way Tool and Valve Puller Set, part number SLM20088. Let's go ahead and take a look at what you get with this part number. First off you get this tool right here and four standard valve cores. The four valve cores are designed to work with your standard schrader valve. This is a great kit to have around in case you have to do some maintenance on your tires and wheels. A lot of times, if you don't find a leak on a rim or a tire, it could be your valve core going bad on the inside, this is very easy to replace. Let's go ahead and cover the different ends of our tool here. First off we got this slotted end right here.

This works for removing and tightening down or installing the valve core. Get it loose and you can go ahead and pull it out. We got two different ends here, one here and here, they're intended to clean out the inside threads of your valve. In this case we'll be using this size. You just twist it in, back and forth to help clean it out.

Make sure you get any dirt out of there or debris. You can also use this end on the outside threads here. This works really good if you got metal valve caps to go on your brass valve here to help keep them clean. Once we have all our threads cleaned out we can go ahead and install a new core, and use our tool to install it. Doesn't have to be super tight, just snug, and that's it. That'll finish it for Slime 4-Way Tool and Valve Core Set, part number SLM20088..