# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
The rack is much bigger than my previous one. I was disappointed that it was made in China instead of the USA. It assembled very easily and the light kit works very well. The only draw back is I can no longer open my tailgate with the rack installed due to the spare tire hitting the raised rack.
Purchased in March 2023. I really like the size, it holds a lot. The carrier is very sturdy, well made and assembled very easily. I purchased the light kit but found wiring could have been a little longer to dress the cables neatly down toward the hitch.
# 2
32x48 Reese Steel Solo Cargo Carrier and Folding Ramp for 2" Hitches - 400 lbs
Very fast shipping, I like that.now about this rack,very well built and easy to put together.ramp is ok but not good enough for me,to steep,took to a welder shop and had another 2ft added,now it's 6ft long and folds up the same way,now it works great.this rack sits about 4ft from the truck so I'm putting lights on this and new stickers,the ones that are on suck,they fell off.now the receiver of the rack,can be turned to make the rack lower but to me it's to low and will drag in dips so I have it up high,its about 2ft now and can't drag that why I added to the ramp,make it work for you.now this rack does wobble some so buy a hitch stabilizer for 20 bucks that stops that problem. This is still better than dragging around a trailer and still I can park in a parking lot so it works for me
cargo carriers work great! we use them for hauling mowers for our landscaping business so they get daily abuse and hold up very well
# 3
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
I only gave an average rating because the carrier was not easy to assemble without slight modification. The bolt holes for assembly were blocked by the steel mesh. I cut the mesh that covered several of the holes with a rotary disc cutter.
# 4
20x48 Reese Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
This is a sturdy carrier. Welds all seem good. Paint is just fine. Steel tubing is very strong. The weight is heavy but reasonable for one person to install and remove. I plan to remove it when not in use on our trip to avoid having to fold it up and lose ability to access the hatch on our van. It has a bit of play in both the receiver and on the folding hinge. I’m going to use construction shims taped in place to reduce the wiggle but even without those, it’s not bad. Even with a jumbo cooler, we can still see the plate. This will do the trick for vacation and camping gear without having to haul a massive 60” carrier. Love the size and build.
Product came in a single box in perfect shape. Great construction, easy to put together. I bought this to go on the front of my John Deere Gator 855D. Sometimes, there just isn't enough room to pack everything you need when going down the trail or you don't feel like slinging a Honda generator and a heavy cooler packed full of ice and your favorite beverages up in the back of the bed. This cargo carrier fit the bill perfectly. It took all of 5 minutes to put it together and slide into the front 2" receiver on my gator. With the fold up design, I have 22" of clearance between the ground and the bottom of the carrier when carrier is folded out horizontal. Being the carrier is 48" wide, it is narrower than the gator, so I don't have to worry about trying to squeeze through a tight space in the woods. If the gator will go through the space, so will the carrier rack. When I don't need the carrier, it is a snap to pull the pin, swing the carrier rack 90 degrees up and pop the pin back in. Even when folded into the upright position, you can easily see over the carrier rack. Thanks for making a great product.
# 5
20x47 Reese Cargo Carrier for 1-1/4" Hitches - Steel - 300 lbs
This is great cargo basket: solid and secure, easy assembly, well designed. The angled neck keeps the basket well away from the ground; I haven’t had any problems with it bottoming out. My first use was actually on a trip back from Florida following Powered Paragliding training. I was intending to bring back just a Paramotor (which would have stood vertically inside the basket), but ended up bringing back a whole Trike assembly! Mounted it on the basket as shown, and it rode just fine back through four states. Got a lot of looks on the way home! I concur with an earlier reviewer that a neat trick is to use a stabilizer strap from the hitch to the corner of the basket. There is plenty of slop in the receiver when the neck is inserted, and a short ratcheting tie down cancels the rattle effectively. I’m very pleased with this purchase; and while I don’t plan to haul around anything as big as that trike, I look forward to many more years of use from it!
First look - not yet loaded up. Ordered this because the less expensive Curt (C18110) was out of stock. It seems like a worthwhile upgrade anyway, with rounded corners and better tie-down options. Finish seems high quality. Significant play exists in the hitch receiver (Curt C11276 - gap visible in photo) to the point that I ordered a hitch immobilizer and don't plan to test the carrier with a full load until that's installed.
What our customers are saying:
"The hitch and the carrier came in much earlier than expected. The cargo carrier assembled in a few minutes. The hitch went on like a glove. I was very satisfied with it's quality. My salesperson was very helpful and made sure that I had the right things. Overall, I was very pleased."