Most Popular Weld-On for Ram 1500

This is an excellent replacement for the jack on my Legend 16' V-nose with aluminum frame, it was easy to install, mounting flange matched perfectly. This style trailer sits very low and has always been a headache going in and out of gas stations, ect. The original style Jack foot hits "sometimes very hard," even when the jack is cranked all the way up. Now I rotate the top pin, remove the bottom foot pin and remove the complete Jack and store it in the back of the truck, takes 30 seconds.

Mine arrived with a drill bit end broken into the release handle. In fact, the drill bit was what was holding it together. I don't know what a production unit has in that through hole (a roll pin?). Regardless, it isn't something you want to find in a new jack. After I punched it out, I added a snap ring pin to hold it in place. One other comment would be that the foot needs to be unbolted in order to remove the jack. Ideally a locking pin would have been better than the bolt for a "no-tools-needed" removal.

I purchased this JA-5000S-B Sidewind jack for my 20' Car Hauler because I added a Harbor Freight toolbox that was taller than my top wind jack. This one is somewhat taller than the one replaced and moves the wind handle toward the truck. In my case the tailgate still drops and clears the handle by 10" or so. The jack is a little slower than the last one but has a higher weight rating (5000 lbs) etrailer always helps with the selection and has been a great resource.

Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.

Great product, just what I was looking for. I've purchased 8 of these Jack's in the past few months and very happy with them. 2 days at my door after placing order to witch is impressive

7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order

ordering was an easy and simple process. Tracking process and delivery time was top notch. Will order from etrailer.com again!

After the gears on my original/stock A-frame sidewind jack had stripped and failed (BAL 2000 mounted on my 2017 Forest River Rockwood mini-lite model 2306 with a dry weight of 4005 lbs), I replaced it with another BAL 2000 sidewind model which lasted less than 6 months before the gears also had stripped and failed. After reviewing numerous A-frame jack sidewind models, I decided to purchase the Bulldog A-frame sidewind model with a rating of 5000 lbs and a 15" lift. I also purchased the corresponding foot pad to help with the distribution of weight. The installation was straightforward and simple and so far, I have not experienced any functional issues with the jack. For anyone searching for and in need of a high quality and capable A-frame sidewind trailer jack, I would highly recommend this particular model.

A big upgrade and more trusted product. I just didn't fill safe with the trailer jack I had on the side. It was easy to install along with the detachable footplate w/pin. Ordering from etrailer online was easy No issues at all. Thx etrailer, Merry Christmas from Tx

Parts quality at a price that no one else seem to be able to match, parts were in my hands and on the trailer in less than 4 days. Great service, great prices. etrailer.com is now in my favorites and the first place I go for parts. Thanks etrailer!

Package arrived a day early. Jacks were just as I expected and best price I found. Can’t wait to get them welded on. Will be buying more jacks in the future. Best selection I’ve found as well.

Purchased to stabilize my recently obtained trailer for hauling my tractor. The jacks add a great deal of security and safety to the operation by allowing me to block the downward movement of the rear of the trailer while driving the tractor onto it, then being able to remove them once loaded for transport.

Worked perfectly for supporting the rear of the trailer for loading my tractor Mounted one on each side on rear of trailer

Good inexpensive jack. I ordered two. My use for them is somewhat "off label". My 19" 9000# capacity flatbed trailer has a label on the dovetail indicating that the rear of the trailer should be supported for any loads over #3000. Personally I think supporting the rear for a trailer is always a good idea when loading and unloading. It puts less strain on the rear of the trailer and it prevents the trailer from lifting the rear of the tow vehicle during loading which can be extremely dangerous. I had a friend weld the tube mounts on each side of the rear of the trailer. See pictures below. Now I don't need cribbing or chunks of wood to shove under the rear of the trailer. These will also adapt well to uneven ground. They can be stowed horizontally, like in the picture or removed when not needed.

Bought the jack for a very heavy no till grain drill. Jack was well built and handled the tongue weight fine

Was having issues with the trailer lifting the backend of my truck when I loaded tractors. When I would drive the tractor on the back of the trailer would go down from the weight on the rear which caused the front of the trailer to lift the backend of my truck. So, I bought a couple of the Square, Pipe Mount, Swivel Jacks with Footplates and a Drop Leg. They are Topwind, 7K, Jacks. I had them welded on. This should stop the issue I'm having. I know the 7K was a little over kill but the price was great.

Mounted on the bottom of the new trailer jack i bought from etrailer. Everything works as advertised. Fair price and great customer service

seems to be good frame jack

The jack was in stock, the shipping process started immediately, and it was delivered when promised! Thank you.

Replaced original on the trailer. Works perfectly and easy install.

We've installed these on several trailers for out autorestoration and custom welding shop in detroitlakes mn, we also build bumper jacks and other lifting equiptment out of these. Etrailer sells them at the best price ,and packaging/shipping was impressive too. Even beaten half to death, scratched, dented, left in the weather, mud and rust, these things still work effortlessly, theyre the only way to go and easy to hook to hyraulic, chain, motor or cable drives for hands free operations !

this trailer jack is easy to lift your trailer. It also has grease fittings to keep it turning easy. Good product

The jack on my cattle trailer wore out. I ordered a replacement from etrailer and within a couple of days the new jack was delivered. My son, a welder, cut the old jack off and installed the new jack. The new jack is so superior to the old one. The ability to turn the jack parallel and out of the way is great. I am sending before and after photos. Thanks for the great service and product!

The action is smooth and the construction sturdy. A+

Good price, exactly what I needed. Order fulfillment times can't be beat.

Great product at a great price. Used the chat and and got great help quickly.

Im starting to wonder about shipping

ordered the wrong jack and was sent a return freight label, and i ordered this one right away good service. waiting to receive my credit minus shipping

I received Reese jacks instead of the PRO SERIES JACK as pictured.

Very heavy. Replaced an OEM with a wheel. I much prefer the foot to the wheel. Install was ok. I simply used the existing mount and the original snap ring. The snap ring shipped with the mount was a little thicker and I couldnt get it to work. I saved the weld on mount for another trailer I'm building.

I have used the Jack several times and works excellent. Well built. I leave it off the trailer and will use it on other trailers which have pipe mounts, as the trailer I bought it for is used infrequently. All the people that work at etrailer were very helpful in getting the right jack for my needs. I will be rebuilding another bulldog jack and will order parts when I determine what is required to repair it.

Original jacks arrived damaged by shipper in transit. etrailer sent replacements right away and a prepaid label to return damaged products. Replacements arrived shortly afterwards, thank you. Jacks themselves are well made, sturdy and easy to use. Swing away feature also allows jack to be physically removed from trailer and stored elsewhere, an especially important feature as the jack could otherwise be easily removed and stolen if left on trailer tongue. Pictures of project to follow.

The perfect jack for low clearance trailers! I had trouble finding a jack for my bumper pull horse trailer that wouldn't drag the ground pulling into gas stations, parking lots, etc. I looked at all the farm and home stores in my area with no luck. I thought maybe it didn't exist...then I found etrailer. The short extension below the mount on this jack was exactly what I needed! When fully retracted, it extends no lower than the hitch. I gained five inches from the previous jack. Great peace of mind when traveling and much less worry about dragging when I need all the clearance I can get! Thanks etrailer...and the video was excellent in helping me make sure I was getting what I wanted!

Nice addition to my trailer. I spent a lot of time looking for a jack with a short "hang down " distance from the frame to the ground. This one is perfect. The trailer rides low and will bottom out without a short "hang down".

After a year being stored outside on the trailer, it is working just fine

The trailer part was delivered on time and the unit was the right item, the first time.

Really quick shipping. Shipping box was not in the best shape and part of the footplate was protruding from the box. Looks like it will be a perfect replacement for a 25 year old jack on my gooseneck horse trailer. I will get the old one cut off and this new one welded on as soon as the weather warms up.

My horse trailer is 20 years old and I thought that overnight I'd aged 40 years when I could no longer crank the jack up or down! I looked on line after a 20 something friend suggested that the jack needed to be replaced. He helped me crank the old one down and thought that he'd hurt his back. I ordered this Bulldog Square Jack on a Sunday afternoon. It was delivered to my trailer guy on Wednesday about noon. My guy swapped out my old jack for this one in about 2.5 hours. When I picked up my trailer, I tried the new jack and realized that once again, I was 64 years young!! It operates smooth as silk!!

Didn't know back in 2001 that the Fulton jack on my brand new Javelin boat trailer was as tough as it has been. No garage, no concrete. Just a metal carport sitting on dirt. Took 23 years of abuse (no maintenance very little greasing) to finally give out. I know it's unusual for someone to keep a boat that long but I love it and I don't plan on getting rid of it. Hopefully I get another 23 years out of this Fulton

Hey have to give to etrailer.com fast shipping and jack was exact fit