Most Popular Swivel Jack for Ram 1500

I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.

This jack is perfect. It fits my trailer well, seems well built, and was easy to install. Some of the other jacks I looked at locally seemed like they were mounted loosely and would rattle around. This one is tight against the trailer and doesn't rattle while driving.

Perfect replacement for my jet ski trailer. Easy installation and fast shipping from etrailer. Thanks!

Easy install to provide greatly improved unhitched trailer handling. This item was the final component to complete a refurbished trailer for my catamaran. My project started with a 1987 Calkins single-axle used trailer, adding the following E Trailer parts: 1. Miro-Flex Trailer Stop/Turn/Tail Light unit 2. CE Smith V-Wing Bolster Brackets 3. Rectangular Trailer Reflectors, Adhesive Mount - Amber 4. Erickson Hide-A-Hook Truck or Trailer Anchors 5. Pro Series Snap-Ring Swivel Marine Jack and completed with a hand-built frame assembly and covered bunk boards.

Package arrived a day early. Jacks were just as I expected and best price I found. Can’t wait to get them welded on. Will be buying more jacks in the future. Best selection I’ve found as well.

Purchased to stabilize my recently obtained trailer for hauling my tractor. The jacks add a great deal of security and safety to the operation by allowing me to block the downward movement of the rear of the trailer while driving the tractor onto it, then being able to remove them once loaded for transport.

Worked perfectly for supporting the rear of the trailer for loading my tractor Mounted one on each side on rear of trailer

Good inexpensive jack. I ordered two. My use for them is somewhat "off label". My 19" 9000# capacity flatbed trailer has a label on the dovetail indicating that the rear of the trailer should be supported for any loads over #3000. Personally I think supporting the rear for a trailer is always a good idea when loading and unloading. It puts less strain on the rear of the trailer and it prevents the trailer from lifting the rear of the tow vehicle during loading which can be extremely dangerous. I had a friend weld the tube mounts on each side of the rear of the trailer. See pictures below. Now I don't need cribbing or chunks of wood to shove under the rear of the trailer. These will also adapt well to uneven ground. They can be stowed horizontally, like in the picture or removed when not needed.

Was having issues with the trailer lifting the backend of my truck when I loaded tractors. When I would drive the tractor on the back of the trailer would go down from the weight on the rear which caused the front of the trailer to lift the backend of my truck. So, I bought a couple of the Square, Pipe Mount, Swivel Jacks with Footplates and a Drop Leg. They are Topwind, 7K, Jacks. I had them welded on. This should stop the issue I'm having. I know the 7K was a little over kill but the price was great.

So far been holding up very well. Used as a tongue jack on some hopper bottom pup trailers and these jacks give us the reach to be able to unhook them from the pintle without need to hunt around for wood blocks to place under the jack.

The jack on my cattle trailer wore out. I ordered a replacement from etrailer and within a couple of days the new jack was delivered. My son, a welder, cut the old jack off and installed the new jack. The new jack is so superior to the old one. The ability to turn the jack parallel and out of the way is great. I am sending before and after photos. Thanks for the great service and product!

The action is smooth and the construction sturdy. A+

Good price, exactly what I needed. Order fulfillment times can't be beat.

Great product at a great price. Used the chat and and got great help quickly.

Great product at a fair price. etrailer customer service is second to none.

Heavy Duty works as expected. Arrived in short order. Installed in minutes. Thank you etrailer!

I received Reese jacks instead of the PRO SERIES JACK as pictured.

Very heavy. Replaced an OEM with a wheel. I much prefer the foot to the wheel. Install was ok. I simply used the existing mount and the original snap ring. The snap ring shipped with the mount was a little thicker and I couldnt get it to work. I saved the weld on mount for another trailer I'm building.

After about 2,000 miles, maybe 30 times disconnecting the trailer, a part in the crank fell out, I believe it was a pin. But it fell out inside the cover and I put it back in and the crank worked again. It hasn't failed yet, even tho I know it's just a temp. fix. I wish the handle stowed, it just dangles when in the up position, but it's never hit the ground that I know of. And it was a pain to find someone to weld it on. But I would still buy this product again and would recommend it to a friend.

For the last 20 years I've had a small utility trailer that I've been picking up, moving around and dropping on the hitch ball. At 66 years old I decided it was time to save my back and I bought The Pro Series Round , Snap-Ring Swival Jack- (weld on) w/ 10" lift - 2,000lbs. With 2 hours I had the jack weled on my trailer. WOW - wish I did this years ago. The jack cranks very smooth and lifts and drops down Iike a dream!!

Perfect. Needed a jack for my off road utility trailer which is only 2” square. Just what the doctor ordered. Super fast shipping. Awesome customer service. Thanks.

Easy to install and use I can get my Tritoon trailer on & off with ease one handed!! My old jack was not even a year old and took two hands to crank it!! Has grease zero fitting to lubricate it !! And under $ 50.00 + minimum shipping was about $64.00 total what deal !! Sincerely from Bonita Springs Florida RSB

Didn't know back in 2001 that the Fulton jack on my brand new Javelin boat trailer was as tough as it has been. No garage, no concrete. Just a metal carport sitting on dirt. Took 23 years of abuse (no maintenance very little greasing) to finally give out. I know it's unusual for someone to keep a boat that long but I love it and I don't plan on getting rid of it. Hopefully I get another 23 years out of this Fulton

Hey have to give to etrailer.com fast shipping and jack was exact fit