# 1
Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
This is an excellent replacement for the jack on my Legend 16' V-nose with aluminum frame, it was easy to install, mounting flange matched perfectly. This style trailer sits very low and has always been a headache going in and out of gas stations, ect. The original style Jack foot hits "sometimes very hard," even when the jack is cranked all the way up. Now I rotate the top pin, remove the bottom foot pin and remove the complete Jack and store it in the back of the truck, takes 30 seconds.
Mine arrived with a drill bit end broken into the release handle. In fact, the drill bit was what was holding it together. I don't know what a production unit has in that through hole (a roll pin?). Regardless, it isn't something you want to find in a new jack. After I punched it out, I added a snap ring pin to hold it in place. One other comment would be that the foot needs to be unbolted in order to remove the jack. Ideally a locking pin would have been better than the bolt for a "no-tools-needed" removal.
# 2
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
I purchased this JA-5000S-B Sidewind jack for my 20' Car Hauler because I added a Harbor Freight toolbox that was taller than my top wind jack. This one is somewhat taller than the one replaced and moves the wind handle toward the truck. In my case the tailgate still drops and clears the handle by 10" or so. The jack is a little slower than the last one but has a higher weight rating (5000 lbs) etrailer always helps with the selection and has been a great resource.
Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.
# 3
Bulldog Round, A-Frame Jack - Sidewind - 15" Lift - 5,000 lbs
ordering was an easy and simple process. Tracking process and delivery time was top notch. Will order from etrailer.com again!
After the gears on my original/stock A-frame sidewind jack had stripped and failed (BAL 2000 mounted on my 2017 Forest River Rockwood mini-lite model 2306 with a dry weight of 4005 lbs), I replaced it with another BAL 2000 sidewind model which lasted less than 6 months before the gears also had stripped and failed. After reviewing numerous A-frame jack sidewind models, I decided to purchase the Bulldog A-frame sidewind model with a rating of 5000 lbs and a 15" lift. I also purchased the corresponding foot pad to help with the distribution of weight. The installation was straightforward and simple and so far, I have not experienced any functional issues with the jack. For anyone searching for and in need of a high quality and capable A-frame sidewind trailer jack, I would highly recommend this particular model.
# 4
Pro Series Round, Snap-Ring Swivel Jack - Bolt On - Topwind - 10" Lift - 2,000 lbs
I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.
This jack is perfect. It fits my trailer well, seems well built, and was easy to install. Some of the other jacks I looked at locally seemed like they were mounted loosely and would rattle around. This one is tight against the trailer and doesn't rattle while driving.
# 5
etrailer Boat Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 29-1/8" Lift - Zinc - 2.5K
Excellent delivery time! Very quick and easy installation. The jack feels well made the cranking is smooth. Highly recommend this jack.
Exactly what I needed for my boat trailer. When retracted it clears the road. The flip up hitch that was on it could not handle the salt water dips and seized up after a year. This is a lifetime jack.
# 6
Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 3,000 lbs
Jack works great. Damaged the original when I forgot to lift the foot and hit my concrete parking apron. After I straighten out the mount this jack fit the hole perfectly and works great.
Instillation was very easy and it works amazingly. My trailer had a electric jack before and I was always having to maintain a battery, now I don't he to mess with that and it lifts super easy. I highly recommend this jack for enclosed trailers or heavy tongue weighted trailers.
# 7
Pro Series Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,000 lbs
Perfect replacement for my jet ski trailer. Easy installation and fast shipping from etrailer. Thanks!
Easy install to provide greatly improved unhitched trailer handling. This item was the final component to complete a refurbished trailer for my catamaran. My project started with a 1987 Calkins single-axle used trailer, adding the following E Trailer parts: 1. Miro-Flex Trailer Stop/Turn/Tail Light unit 2. CE Smith V-Wing Bolster Brackets 3. Rectangular Trailer Reflectors, Adhesive Mount - Amber 4. Erickson Hide-A-Hook Truck or Trailer Anchors 5. Pro Series Snap-Ring Swivel Marine Jack and completed with a hand-built frame assembly and covered bunk boards.
# 8
Fulton XLT Electric Boat Trailer Jack w/ Footplate - Drop Leg - 22" Lift - 2.5K
Worked Great the first year. My battery died so I used the manual override feature the key broke < 2yrs old. Having trouble getting a replacement Pin and Bolt Adapter.
Excellent services, a trouble with my Fulton XLT was fixed rapidly, i recommend. A special thanks to Paula and William, they are there for your questions and answer rapidly
# 9
Pro Series Round, A-Frame Jack w/ External Gearbox - Sidewind - 14" Lift - 2,000 lbs
Mounted on the bottom of the new trailer jack i bought from etrailer. Everything works as advertised. Fair price and great customer service
seems to be good frame jack
# 10
Bulldog Round, A-Frame Jack - Topwind - 15" Lift - Zinc - 2,000 lbs
The jack was in stock, the shipping process started immediately, and it was delivered when promised! Thank you.
Replaced original on the trailer. Works perfectly and easy install.
# 11
Buyers Products A-Frame Jack w/ Support Foot - 15" Travel - 5,000 lbs
Have used this on a flatbed for over a year. Has worked flawlessly and recommend this jack. If the weight rating matches your needs, this is an excellent product for the price point.
Easy installation, seems sturdy, and no problem in raising or lowering the. Wish it was made in the USA. Replaced the coupler at the same time, as the picture shows
# 12
etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs
Great product at a fair price. etrailer customer service is second to none.
Heavy Duty works as expected. Arrived in short order. Installed in minutes. Thank you etrailer!
# 13
Fulton Boat Trailer Jack w/ Footplate - Fixed Mount - 28" Lift - Zinc - 5,000 lbs
This product has proven durable and easy to use. Installation with simple and straight forward. If you're looking for a robustly built, long lasting Jack for your boat this would be THE product you're looking for. We previously purchased other jacks that did not last, became hard to crank, and ultimately failed. I'm glad I purchased this.
Makes an easy job of lifting a heavy trailer tongue.
# 14
Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
The perfect jack for low clearance trailers! I had trouble finding a jack for my bumper pull horse trailer that wouldn't drag the ground pulling into gas stations, parking lots, etc. I looked at all the farm and home stores in my area with no luck. I thought maybe it didn't exist...then I found etrailer. The short extension below the mount on this jack was exactly what I needed! When fully retracted, it extends no lower than the hitch. I gained five inches from the previous jack. Great peace of mind when traveling and much less worry about dragging when I need all the clearance I can get! Thanks etrailer...and the video was excellent in helping me make sure I was getting what I wanted!
Nice addition to my trailer. I spent a lot of time looking for a jack with a short "hang down " distance from the frame to the ground. This one is perfect. The trailer rides low and will bottom out without a short "hang down".
# 15
Ram Round A-Frame Trailer Jack - Topwind - 14-7/8" Travel - Zinc - 3,000 lbs
After a year it has become hard to turn, tried to lubricate it but still hard after any weight is placed on it. Requires two hands and an excessive amount of force. Would not recommend for long term reliability
The jack fit perfectly on my 5x10 trailer and the operation of the jack is super smooth. I also bought the optional wheel and foot for it. The wheel makes it easy to move around our place doing light yard work without having to hook it to the truck. The lawn tractor can easily pull it via the safety chains.
# 16
Pro Series Round, A-Frame Jack - Topwind - 14" Lift - 2,000 lbs
After a year being stored outside on the trailer, it is working just fine
The trailer part was delivered on time and the unit was the right item, the first time.
# 17
Round Snap Ring Swivel Jack w/ Footplate - Bolt On - Black - Topwind - 10-1/2" Travel - 2K
Perfect. Needed a jack for my off road utility trailer which is only 2” square. Just what the doctor ordered. Super fast shipping. Awesome customer service. Thanks.
Easy to install and use I can get my Tritoon trailer on & off with ease one handed!! My old jack was not even a year old and took two hands to crank it!! Has grease zero fitting to lubricate it !! And under $ 50.00 + minimum shipping was about $64.00 total what deal !! Sincerely from Bonita Springs Florida RSB
# 18
Phoenix Electric Trailer Jack - A-Frame - 22-1/2" Lift - 4,000 lbs
I installed this on a construction tool cargo trailer. This trailer is outfitted with solar and a battery bank so an electric jack was a no brainer since I already had plenty of power storage. I didn't want to install in the stock jack location so that I could fully open my truck's tailgate. I was able to find a bolt-on jack bracket from a different online store, which made for a easy installation without welding. The same electrician that installed the solar and batteries wired the jack into the elec system and he said it was slick. The trailer has several thousand pounds of tongue weight and this jack has no problem lifting it. The memory settings are handy. This saves quite a bit of time connecting and disconnecting. With the push of a button the trailer jack lifts or lowers automatically while I deal with the safety chains, break away cable, and 7 prong plug. Just as advertised it lifts very quickly even under load. It was installed about a year ago and it's still going strong. I give this a 5 star rating without hesitation. Strong, durable, and well made.
I have had 6 trips with the Phoenix 4000 and it worked great for first 4 . Hooking up for 5th trip I pressed button to raise . Button lite up for a second then turned off. Trailer did not raise . I turned power off then back on hoping to reboot and it worked. It failed again at camp . I used ratchet to operate. When I got home I found 30 amp fuse blown inside of camper . I replaced fuse . I also believe inline fuse provided was loose at spring so I replaced with30 amp blade style fuse . It has worked perfectly now and hoping it will continue.
# 19
Pro Series Round, A-Frame Jack w/ Removable Footplate - Topwind - 14" Lift - 2,000 lbs
It works perfect for our trailer right out of the box and is continuing to work for us. Thanks so much.
Overkill for my little 5x8 utility trailer, but it looks and works great!
What our customers are saying:
"What can you say. I ordered the part on the 17th and I received it on the 19th. Fantastic purchase. I know where I will go for all my future trailer needs. Thanks for the great experience."