Most Popular A-Frame Jack for Ram 1500

I have a Jeep Wrangler and the back door would not open because the neck of the jack that came with the trailer was too tall. This neck - when lowered all the way, does not impeed the door from opening. I talk with a rep before ordering. She was very helpful and got me the correct product.

This is an excellent replacement for the jack on my Legend 16' V-nose with aluminum frame, it was easy to install, mounting flange matched perfectly. This style trailer sits very low and has always been a headache going in and out of gas stations, ect. The original style Jack foot hits "sometimes very hard," even when the jack is cranked all the way up. Now I rotate the top pin, remove the bottom foot pin and remove the complete Jack and store it in the back of the truck, takes 30 seconds.

I purchased this JA-5000S-B Sidewind jack for my 20' Car Hauler because I added a Harbor Freight toolbox that was taller than my top wind jack. This one is somewhat taller than the one replaced and moves the wind handle toward the truck. In my case the tailgate still drops and clears the handle by 10" or so. The jack is a little slower than the last one but has a higher weight rating (5000 lbs) etrailer always helps with the selection and has been a great resource.

Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.

After the gears on my original/stock A-frame sidewind jack had stripped and failed (BAL 2000 mounted on my 2017 Forest River Rockwood mini-lite model 2306 with a dry weight of 4005 lbs), I replaced it with another BAL 2000 sidewind model which lasted less than 6 months before the gears also had stripped and failed. After reviewing numerous A-frame jack sidewind models, I decided to purchase the Bulldog A-frame sidewind model with a rating of 5000 lbs and a 15" lift. I also purchased the corresponding foot pad to help with the distribution of weight. The installation was straightforward and simple and so far, I have not experienced any functional issues with the jack. For anyone searching for and in need of a high quality and capable A-frame sidewind trailer jack, I would highly recommend this particular model.

ordering was an easy and simple process. Tracking process and delivery time was top notch. Will order from etrailer.com again!

A big upgrade and more trusted product. I just didn't fill safe with the trailer jack I had on the side. It was easy to install along with the detachable footplate w/pin. Ordering from etrailer online was easy No issues at all. Thx etrailer, Merry Christmas from Tx

Parts quality at a price that no one else seem to be able to match, parts were in my hands and on the trailer in less than 4 days. Great service, great prices. etrailer.com is now in my favorites and the first place I go for parts. Thanks etrailer!

Jack works great. Damaged the original when I forgot to lift the foot and hit my concrete parking apron. After I straighten out the mount this jack fit the hole perfectly and works great.

Instillation was very easy and it works amazingly. My trailer had a electric jack before and I was always having to maintain a battery, now I don't he to mess with that and it lifts super easy. I highly recommend this jack for enclosed trailers or heavy tongue weighted trailers.

Mounted on the bottom of the new trailer jack i bought from etrailer. Everything works as advertised. Fair price and great customer service

seems to be good frame jack

The jack was in stock, the shipping process started immediately, and it was delivered when promised! Thank you.

Replaced original on the trailer. Works perfectly and easy install.

Have used this on a flatbed for over a year. Has worked flawlessly and recommend this jack. If the weight rating matches your needs, this is an excellent product for the price point.

Easy installation, seems sturdy, and no problem in raising or lowering the. Wish it was made in the USA. Replaced the coupler at the same time, as the picture shows

The perfect jack for low clearance trailers! I had trouble finding a jack for my bumper pull horse trailer that wouldn't drag the ground pulling into gas stations, parking lots, etc. I looked at all the farm and home stores in my area with no luck. I thought maybe it didn't exist...then I found etrailer. The short extension below the mount on this jack was exactly what I needed! When fully retracted, it extends no lower than the hitch. I gained five inches from the previous jack. Great peace of mind when traveling and much less worry about dragging when I need all the clearance I can get! Thanks etrailer...and the video was excellent in helping me make sure I was getting what I wanted!

Nice addition to my trailer. I spent a lot of time looking for a jack with a short "hang down " distance from the frame to the ground. This one is perfect. The trailer rides low and will bottom out without a short "hang down".

After a year it has become hard to turn, tried to lubricate it but still hard after any weight is placed on it. Requires two hands and an excessive amount of force. Would not recommend for long term reliability

The jack fit perfectly on my 5x10 trailer and the operation of the jack is super smooth. I also bought the optional wheel and foot for it. The wheel makes it easy to move around our place doing light yard work without having to hook it to the truck. The lawn tractor can easily pull it via the safety chains.

I installed this on a construction tool cargo trailer. This trailer is outfitted with solar and a battery bank so an electric jack was a no brainer since I already had plenty of power storage. I didn't want to install in the stock jack location so that I could fully open my truck's tailgate. I was able to find a bolt-on jack bracket from a different online store, which made for a easy installation without welding. The same electrician that installed the solar and batteries wired the jack into the elec system and he said it was slick. The trailer has several thousand pounds of tongue weight and this jack has no problem lifting it. The memory settings are handy. This saves quite a bit of time connecting and disconnecting. With the push of a button the trailer jack lifts or lowers automatically while I deal with the safety chains, break away cable, and 7 prong plug. Just as advertised it lifts very quickly even under load. It was installed about a year ago and it's still going strong. I give this a 5 star rating without hesitation. Strong, durable, and well made.

I have had 6 trips with the Phoenix 4000 and it worked great for first 4 . Hooking up for 5th trip I pressed button to raise . Button lite up for a second then turned off. Trailer did not raise . I turned power off then back on hoping to reboot and it worked. It failed again at camp . I used ratchet to operate. When I got home I found 30 amp fuse blown inside of camper . I replaced fuse . I also believe inline fuse provided was loose at spring so I replaced with30 amp blade style fuse . It has worked perfectly now and hoping it will continue.