# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
# 3
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.
I actually got my hitch the date they said it would be here to my surprise. When the box arrived it was pretty much beat up, not the hitch just the box. I wished there was instructions how to install it. Overall very satisfied and will buy from 5hem again
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
I purchased this Curt Ball mount 10-1/4" because I also bought ball hitch mounted mud flaps and my existing hitch was too short.This hitch was maybe a little too long, but it should work.I hope this combination will protect my horse trailer from my nasty gravel roads!
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 5
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.
This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.
# 6
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
definitely solid as a rock
# 7
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.
Great customer service. Live in SC - ordered a hitch and USPS delivered it to PUERTO RICO. Go figure. Stacey A refunded my money - but 2 weeks later hitch appeared on my doorstep. All’s well that ends well.
# 8
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
The product is good but a bit tideous and after installing it my bracket fell and it was a pain to get replace it support made me buy the replacement pieces and the bracket didnt come with just the bolts, and at the end they told i have i had to buy the whole unit because based on their system my truck didnt have issues with installement and the manufacturer didnt supply that bracket cause it special order so in general i dont recommend in my choice better to get it welded.
# 9
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
# 10
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.
I needed a hitch that I could haul my work trailer with and still drop the tailgate without dropping the trailer. I looked on etrailer and found one that would work barely but decided to call etrailer and see if anyone had any ideas. Steve answered and looked after I told him my requirements and came up with this. This has a longer distance from ball to pin by a few inches compared to the one I found so my tailgate will still drop even if I’m at an angle to my trailer or on a hill. Also with the adjustable height it’s great. Awesome hitch. Solid for a good price. ??
# 11
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Retail type stores only carry mainstream items so when I needed a special length ball mount for my 2011 Traverse I found the size and quality with Curt Products .
Just what I needed. Shipped and received when etrailer said it would. Not my first order and they are always one of my first visits when I need something for my trailer.
# 12
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
My order was missing installation parts, but the etrailer team were quick to correct the issue. Even without a lift, I was able to install the receiver and brake light cable quickly, thanks to their extensive video libray.
High quality ball mount and they arrived at my doorstep within 36 hours of placing my order, how did you do that?
# 13
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
This is really nice. Beveled edges so it slips into receiver hitch so sweet. Beautiful welds heavy weight mount for my weigh safe ball. I bought a 10,000 lbs hitch and I wanted a draw bar with the same type rating. Now the only thing limiting my trailer capacity is my truck's ability to tow, not the hitch, bar or ball.
I purchased a Ranch Hand rear bumper for my 2500HD but wanted to retain the use of a receiver hitch. The ball mount would need to extend 8" from the pin hole to even reach the edge of the bumper. This BM29 ball mount works out perfect. The welds look great and the finish is just fine. The only complaint I have is they gained a little length by moving the pin hole a little closer to the end shortening the insertion amount slightly. Not a big deal, it is just noticable next to the other mounts I have at the house.
# 14
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Excellent hitch easy installation.It only took me about an hr and half to install from start to finish
Very happy with hitch and components, came in a nice tray that I use to store and organize the parts when not in use in the back compartment of my Telluride. All good.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
We have a Pink Tractor (google Mom's Pink Tractor) that we pull to events, mainly in Ks, Ok, Mo, and Ne. We have around 35 events a year we take the tractor to to promote breast cancer awareness. The other day my wife and I were leaving for an event, i had let a friend borrow the hitch to see how he liked it. In less then a mile from the house my wife started complaining about the trailer jerking. That is coming from a lady that really was upset when I paid that much for a hitch. She told me to stop and buy one. (a long and expensive trip, we had to stop at a casino so she could rest her neck) I could write a review with a lot of trailer talk, but, this story tells the story.
# 16
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
I had a great experience ordering from you. Your organization kept me completely up to date with the order & shipping process and delivered the exact products I ordered. Attached is a photo of the 16,000 lbs capacity hitch and 30,000 lbs 2 5/16 ball you sold me in use. The boat and trailer total about 12,000 pounds. Thanks again.
# 17
Flash Simple 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
I like the look of this set very much and it is easy to mount and adjust the ball mount. The workmanship and finish are beautiful. Customer service was excellent in assuring I found the correct mount for my Ford Escape. I pull my 6'x10' utility trailer or very seldom my pontoon trailer. I like that the adjustable mount comes off very easily as I remove it until I need it while my vehicle is in the garage--it helps prevent knocking your leg against it in the garage. However, I am not having any luck loosening the bolt that secures the 2 chrome balls to the adjustable ball mount; I have the correct Allen wrench but cannot exert sufficient torque to loosen the bolt while the adjustable ball holder is off the ball mount. I want to put a different ball combination on so I can pull my son's trailer, which has a smaller ball than comes with the set, if I have to. I also added the anti-rattle device and it stops the mount completely.
This still looks good with no slop easy to switch between the different ball.
# 18
Pintle Hook Combo 2" Ball with 2" Shank, 12K
The hitch I ordered came very quickly. I was able to track it and I pretty much knew when it would be at my door step. The hitch was more then I expected Heavy Duty. Awesome quality and more features then I realized. The fit was perfect. I will be using the hitch on a front mount receiver on my 2014 Silverado.
Excellent Quality... Best price and fastest delivery! Everyone with a towing package needs one of these in their vehicle...
# 19
Curt Multi-Ball Mount for 2" Hitches - Solid, Black Powder Coated Shank - Black Balls
Product was just as advertised. Fast shipping. Good customer service.
Weights a ton. Seems very strong...10,000 pounds using the 2 5/16s balls. Good paint.
# 20
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .
Perfect fit for 2 inch Draw Tite receiver. good price, fast shipping.
Will the B and W Tow and Stow 3-Ball Mount Fit Your 2016 Nissan Frontier?
Today on our 2016 Nissan Frontier, we'll be doing a test fit of the B&W Tow and Stow 3 ball mount for 2 inch hitches. This has a 9 inch drop and a 9.5 inch rise. It's rated at 10000 pounds. The part number is BWTS10050B. We've already got our ball mount installed, as you can see. Going to go ahead and go over a few measurements with you with here, so you can keep that in mind. From the center of the hitch pin hole on our Frontier to the edge of where our ball mount sits, we have about 10.5 inches.
Does it Fit? Testing the B and W Tow and Stow 3-Ball Mount on a 2016 Nissan Frontier
Today on our 2016 Nissan Frontier we will be test fitting the B&W tow and stow 3-ball mount for 2-inch hitches. It has a 7-inch drop and a 7 1/2-inch rise. It is rated at 10,000 pounds. The part number is BWTS10049B. Now we have got out ball mount installed here already on the Frontier. We have got it installed using a pen and clip which is available on our website.
Diversi-Tech Adjustable Ball Mount Review - 2013 Nissan Frontier
Today on our 2013 Nissan Frontier well be test fitting the Divirsi Tech self-locking adjustable aluminum ball mount part number DTALBM6600. Before I begin our test fit well first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17 inches. Keep in mind that this measurement may vary due to tire size, hitch style, or after-market accessories. Well now begin our test fit by sliding the shank of the ball mount in the drop position into the opening of the hitch. We can then turn the key to allow the integrated hitch pin to fall into place securing the ball mount to the vehicles hitch. We can now remove the key and adjust the ball mount platform to its lowest position. Unlocking the ball mount platform will also allow you to switch to the other size ball.
Installing the Curt Tri-Ball Mount on your 2013 Nissan Frontier
Today on our 2013 Nissan Frontier, we'll be test fitting the Curt Tri-Ball Mount for 2" hitches, part number C45001. Before I begin our test fit, we'll first inaudible00:00:11obtain the hitch height of the vehicle, which is the measurement from the ground to the inside top of the receiver tube 00:00:15.The hitch height for this vehicle is 17 and 1/4".Keep in mind that this measurement may vary due to tire size, hitch style, or after market accessories. We'll being our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip.Now since this ball mount has no drop or rise, if your trailer's ride height matches your vehicle's hitch height, this ball mount would be appropriate for you.The Curt Tri-Ball Mount is equipped with 3 different size balls. A 2 and 5/16" ball, a 2" ball and an inch and 7/8ths ball.This ball mount will allow you to carry different sizes and styles of trailers, without having the need to purchase additional ball mounts. With that, that'll complete today's test fit forthe Curt Tri-Ball Mount for 2" hitches, part number C45001, on our 2013 Nissan Frontier. .
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2013 Nissan Frontier
Today on our 2013 Nissan Frontier we'll be test fitting the Convert-a-Ball cushioned six-way multi-hitch ball mount for 2-inch hitches rated at 10,000 pounds, part number CAV-6W. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip. You can rotate the ball mount to access three different size balls, an 1-7/8 inch ball, a 2-inch ball, and a 2-5/16 inch ball. You can also use this ball mount with a clevis, a lunette ring or a spade. You can pull the clip at the center of the shank and lift the pin up allowing you to hook up your trailer. And that will complete today's test fit for the Convert-a-Ball cushioned six-way multi-hitch ball mount for 2-inch hitches, part number CAV-6W on our 2013 Nissan Frontier. .
Installation: MaxxTow Tow Strap Loop for 2" Trailer Hitches on a 2013 Nissan Frontier
Today on our 2013 Nissan Frontier, we'll be test fitting the Maxxtow Tow Strap Loop for 2 inch hitches rated at 10,000 pounds part number MT70029. We'll begin our test fit by sliding the shank of the recovery loop into the opening of the hitch and securing it with the pin and clip which is sold separately. This heavy duty hitch mounted shackle provides an attachment point for strap, cable, or rope which is sold separately to be used in agricultural, industrial or recreational applications. It is made of a sturdy steel construction and has a corrosion resistant black powder coat finish. And that will complete today's test fit for the Maxxtow Tow Strap Loop for 2 inch hitches part number MT70029 on our 2013 Nissan Frontier. .
MaxxTow Adjustable-Height Ball Mount Review - 2013 Nissan Frontier
Today on our 2013 Nissan Frontier we'll be test fitting the Maxxtow adjustable height ball mount for 2-inch hitches with a 10-inch drop or 8-inch rise rated at 5,000 pounds, part number MT70067. Before we begin our test fit we'll firstly obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17-1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll being our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip. We can then remove the two pins here at the downward portion of the ball mount to adjust the ball mount platform to its lowest position. With the ball mount platform in its lowest position we can measure from the ground to the top of the ball platform getting a measurement of about 7-1/4 inches. We can now flip the ball mount over to the rise position and with the ball mount platform in its highest position we can again measure from the ground to the top of the ball platform getting a measurement of about 25-1/4 inches. Now, if your vehicle's hitch height matches our's, and your trailer's ride height is on or in between these two measurement in 1-inch increments, this should be an appropriate ball mount for you. That will complete today's test fit for the Maxxtow adjustable height ball mount for 2-inch hitches, part number MT70067, on our 2013 Nissan Frontier.
Setting up the MaxxTow Ball Mount w/ 2" Accessory Receiver on a 2013 Nissan Frontier
Today on our 2013 Nissan Frontier well be test fitting the MaxxTow ball mount with two inch accessory receiver for two inch hitches rated at 5,000lbs part #: MT70066. Before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17 and a quarter inches. Keep in mind that this measurement may vary due to the tire size, hitch style or after-market accessories. Well begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing it with a pin and clip.
Fit Test: Draw-Tite Ball Mount for 2" Hitches on a 2013 Nissan Frontier
Today on our 2013 Nissan Frontier we'll be test fitting the Draw-Tite Ball Mount for the 3/4" rise or 2" drop rated at 7500 pounds, part number 2923. Before we begin our test fit we'll first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17-1/4". Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll now go ahead and slide shank of the ball mount in the drop position into the opening of the hitch and secure it with a pin and clip. We'll then measure from the ground to the top of the ball platform and we'll get a measurement of about 14-3/4". If your vehicle's hitch height matches ours and your trailer's ride height matches this measurement this should be an appropriate ball mount for you. We can now flip the ball mount over to the rise position.
Convert-A-Ball Pintle Mounting Bar Review - 2013 Nissan Frontier
Today on our 2013 Nissan Frontier we'll be test fitting the Convert-A-Ball Cushion Adjustable Pintle Mounting Bar for Two Inch Hitches Rated at 10,000 Pounds, part number ampc2. Before I began our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17-1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after-market accessories. We'll now begin our test fit in the drop position by sliding the shank of the pintle mounting bar into the opening of the hitch and securing it with the pin and clip.
Install: Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount on a 2013 Nissan Frontier
Today on our 2013 Nissan Frontier we'll be test fitting the Convert-A-Ball Dual Cushioned Adjustable Ball Mount with a seven inch rise or nine inch drop rated at five thousand pounds, part number CAB-UM. Before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is seventeen and a quarter inches. Keep in mind that this measurement may vary due to tire size, hitch style, or after market accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch and securing it with the pin and clip. We can then measure from the ground to the top of the ball platform and we'll get a measurement of about six and three quarters inches.
Set up: Convert-A-Ball Ball Mount for 2" Hitches on a 2013 Nissan Frontier
Today on our 2013 Nissan Frontier, we'll be test fitting the Convert-A-Ball cushioned ball mount for 2 inch hitches, with a 6 3/4 inch rise, or 8 inch drop, rated at 10,000 pounds, part number AMSC8. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17 1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style, or after market accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch, and securing it with a pin and clip. With the ball mount secured, we can then measure from the ground to the top of the ball platform, getting a measurement of about 9 inches. If your vehicle's hitch height matches ours, and your trailer's ride height matches this measurement, this would be an appropriate ball mount for you. We can now flip the ball mount into the rise position, and again, measure from the ground to the top of the ball platform, getting a measurement of about 23 1/4 inches. Once again, if you trailer's ride height matches this measurement, this would be an appropriate ball mount for you. That will complete today's test fit for the Convert-A-Ball cushioned ball mount fro 2 inch hitches, part number AMSC8, on our 2013 Nissan Frontier.
2013 Nissan Frontier Convert-A-Ball Ball Mount for 2" Hitches: Complete Installation
Today on our 2013 Nissan Frontier, we'll be test fitting the Convert-A-Ball cushioned ball mount for 2 inch hitches, with a 1 inch rise, or a 2 inch drop, rated at 14,000 pounds, part number AMSC2HD. Before beginning our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17 1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style, or after market accessories. We'll now begin our test fit by sliding the shank of the ball mount, in the drop position, into the opening of the hitch, and securing it with the pin and clip. We can then measure from the ground to the top of the ball platform, getting a measurement of about 15 1/4 inches. If your vehicle's hitch height matches ours, and your trailer's ride height, which is the measurement from the ground to the bottom of your trailer's coupler, while your trailer is level, matches this measurement, this should be an appropriate ball mount for you. We can now flip the ball mount over into the rise position, and again, measure from the ground to the top of the ball platform.
DIY Install: Convert-A-Ball Ball Mount for 2" Hitches on your 2013 Nissan Frontier
Today on our 2013 Nissan Frontier, we'll be test fitting the Convert-A-Ball cushioned ball mount for 2 inch hitches, with a 3/4 inch rise, or a2 inch drop, rated at 10,000 pounds, part numberAMSC2. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 17 1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style, or after market accessories. We'll begin our test fit by sliding the shank of the ball mount, in the drop position, into the opening of the hitch, and securing it with the pin and clip. We can then measure from the ground to the top of the ball platform, getting a measurement of about 15 inches. If your vehicle's hitch height matches ours, and you trailer's ride height matches this measurement, this would be an appropriate ball mount for you. We can now flip the ball mount over, into the rise position, and again, measure from the ground to the top of the ball platform. We'll get a measurement of about 17 1/2 inches.
Installing the Convert-A-Ball Ball Mount for 2" Hitches on your 2008 Nissan Frontier
Today, on our 2008 Nissan Frontier, we're going to be test-fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC4. Now, the first thing we want to do is measure our hitch height. That's from the ground to the inside top of our receiver tube. Our Frontier has a hitch height measurement of 17 inches. Now, keep in mind that this measurement will vary some even within 2008 Frontiers. Variances in tires, exact model type, and aftermarket parts, even the hitch itself, will determine the hitch height, so make sure you measure your particular vehicle.
Set up: Draw-Tite Ball Mount for 2" Hitches on a 2008 Nissan Frontier
Today, on our 2008 Nissan Frontier, we'll be test-fitting the Draw Tite Ball Mount, part number 2923. Now, the first thing we want to do is measure our hitch height. That's from the ground to the inside top of our receiver tube. Our Frontier has a hitch height measurement of 17 inches. Now, keep in mind that this measurement will vary some even within 2008 Frontiers. Variances in tires, exact model type, and aftermarket parts, even the hitch itself, will determine the hitch height, so make sure you measure your particular vehicle.
Setting up the Curt Tri-Ball Mount on your 2008 Nissan Frontier
Today, on our 2008 Nissan Frontier, we'll be test-fitting the Curt Triball Mount Hollow Shank, part number C45001. Now, the first thing we want to do is measure our hitch height. That's from the ground to the inside top of our receiver tube. Our Frontier has a hitch height measurement of 17 inches. Now, keep in mind that this measurement will vary some even within 2008 Frontiers. Variances in tires, exact model type, and aftermarket parts, even the hitch itself, will determine the hitch height, so make sure you measure your particular vehicle.
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2008 Nissan Frontier
Today, on our 2008 Nissan Frontier, we'll be test-fitting the Convertible Six-Way Multi Hitch Ball Mount, part number CAB-6W. This ball mount features six different towing methods. There are three ball sizes of 1 7/8, two-inch, and 2 5/16, and there is also the ability to use a Clevis lunette ring or spade hitch as well. Now, the first thing that we want to do is measure out hitch height. That's from the ground to the inside top of our receiver tube. Our Frontier has a hitch height measurement of 17 inches.
How to Install: Convert-A-Ball Ball Mount for 2" Hitches on your 2008 Nissan Frontier
Today, on our 2008 Nissan Frontier, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC2. Now, the first thing we want to do is measure our hitch height. That's from the ground to the inside tab of our receiver tube. Our Frontier has a hitch height measurement of 17 inches. Now, keep in mind that this measurement will vary some even within 2008 Frontiers. Variances in tires, exact model type, and aftermarket parts, even the hitch itself, will determine the hitch height, so make sure you measure your particular vehicle.
What our customers are saying:
"Very broad selection and outstanding service."