# 1
Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches - 25,000 lbs
This review is for all the products I have recently bought from e trailer. First of all, no one will ever steal this hitch from my truck. It weighs way too much. It is rock solid!! A3” square 30k hitch plate, and a 30k pintle hitch! Drop it on your toe and it’s an instant amputation!! I love it!! But of all, customer service is beyond belief. I can only dream of having customer in my business this good! The best!!
etrailer and inventory is outstanding
# 2
Curt Pintle Hook for 2-1/2" Hitches - 20,000 lbs
Working great I use the fixed straight hitch when I need a little more hitch height or the adjustable hitch depending on which application works better.
Etrailer is my go-to place for anything trailer related. Good quality, excellent service, prompt delivery. Doesn't get much better than this! Keep up the good work...
# 3
Curt Pintle Hook for 2" Hitches - 20,000 lbs
Great hitch for hauling my tractor. The team at etrailer is awesome. Keep up the great work - I love all the pics and videos.
Fits to loose in the receiver. Made in China.
# 4
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
Very heavy, solid steel. Really made for if you have a jacked 4x4 truck and need to lower the hitch . Runs low on a standard suspension rear wheel drive truck. Turned it up to not drag the ground.
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
# 5
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 17,000 lbs
good quality, showed up with scratches and dinged up but etrailer did make it right.
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
# 6
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 8" Shank - 8 Hole - 18,000 lbs
Previous customer, I purchase all the towing equipment for my sons demolition company. etrailer is always my first stop when I am tasked with finding needed equipment.....this because the site is easy to navigate and provides excellent information relative to capacity and fitment. Whether I am in need of electrical repair parts or hard towing components, etrailer has the right stuff at fair prices. A really great source for all my equipment needs.
This is a very good quality pintle hitch. The cost is very reasonable.
# 7
B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
I needed a longer neck on my pintle. This item is perfect and heavy duty. Quick standard shipping too.
Great product and the price can’t be beat. Solid steel shank, 1/2” steel mounting surface, and a 1/2” steel brace that runs the entire length of the mounting plate for extra rigidity. This thing is solid.
# 8
Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
# 9
B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
The hitch is made from heavy duty steel. And is a excellent match with the owl equipment trailer for hauling out tractor That has weight of 8000 pounds.
This is what I needed to match the height of the trailer. The packaging could have bee better because the hitch broke through the box.
# 10
Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs
I do like the strength of the product. The flaws were the actual bolt on the top piece broke off holding the locking pin first week (allen key bolt). I also have to spray or grease the top piece that opens and closes and the rain rusts the joint quickly and is almost impossible to lift up by hand. I would look to purchase another product here since the price is right, but am not happy with the day to day use of this hitch at all. I do not have a picture at the moment, but if I can, I will show some of the issues. Thanks.
We have used these hitches for a year now and they are definitely the way to go!! We use ours daily hauling equipment and haven't had any problem the best part is you don't have to fight any sleeves. I would recommend these to anyone!
# 11
Tow Ready Pintle Hook for 2" Hitches - 10,000 lbs
Easy lightweight and simple to use! The only issue I’ve had is the chain has come off the locking pin a couple of times, I think I’m going to get a locking pin to replace this one. I deliver motorhomes professionally and this has helped my pre and post trip times a lot, plus it’s so much easier to remove this and throw it in my vehicle when it’s raining than having to wrestle a whole hitch mounted towbar.
Works great and more than anything else, it makes me feel safe that the trailer cannot come loose from my vehicle. Lots of stress lessened when towing. These folks are great to work with and even helped me get one quicker than normal due to some uncontrollable circumstances I found myself in.
# 12
B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
Works great to replace my 2 inch unit for my Silverado 2500HD
As usual, very pleased with customer service and prompt shipping.
# 13
B&W Tow & Stow Pintle Hook - 2-5/16" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
I like the hitch but it is NOT usable for A pintle hitch. The bottom plate where the ring rides in the hitch is flat and very slick and the ring slams around when you turn, stop, and start off. This is VERRY DANGEROUS as it could snap the ball off. If the bottom plate had A place for the ring to lay in it would solve Your Problem. I would like to hear from you Thanks!
The hitch works perfectly on both 2-5/15 ball or pintle ring trailers. When not in use it neatly stows under the truck frame hitch receiver. Two pins and it swings under removing the hazard of someone or something hitting the hitch if were protruding out like traditional ones.
# 14
B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
Very nice product still working fine
Part is well built and gives me the adjustability I needed for multiple applications for my hitches. The wheel had the correct offset I needed to fit my trailer correctly, and the breakaway kit was a great replacement for the one that was broken on the used trailer I just purchased. The universal trailer brake installation kit was just what I was looking for. Great quality and the ability to run either type of trailer wiring harness in one hookup. Great parts and great service!!!
# 15
Curt Pintle Hook for 2" Hitches - 10,000 lbs
I purchased a new Curt Pintle Hook Hitch to tow a small material trailer to construction sites. I am pleased with the hitch and it's ease of operation.
Well made, very s3cure.
# 16
Pintle Hook Mount, 7-1/4" Tall, 12K
Bought this for my 2014 Jeep Rubicon to tow an M416 military trailer. The hitch gave me the exact platform I needed to clear the spare tire (with 1" of vertical space to spare) . . . and keep my trailer level. Also added the Curt Pintle Hook - Bolt On - 10,000 lbs - C48205 and again, the hitch allows the top of the pintle (when closed) to clear the tire. Both items I bought came expertly packaged in a stout box, quickly and with free shipping. etrailer rocked it!
Patrick, I would like to thank your team once again for recieving the adjustable hitch earlier than expected. She will be working on a 1997 Dodge Ram 2500 cummins. What a thing of beauty? paired with the pintle combo. The packaging was excellent for the given weight of pintle combo, adjustable solid hitch and Bulldog stainless hitch lock, great combination. Your staff is second to none. Period. We will be doing buisness in near future again.
# 17
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 10,000 lbs
Excellent customer service! Fast & Affordable. Thank you. Mike
I was very pleased with better than expected quality of the mounting plate. I have already placed into use on my 1989 Ford F350 truck!
# 18
Curt SecureLatch Pintle Hook and Mount with 2" Ball - 2-1/2" Hitches - 20,000 lbs
High quality securelatch. I used it to pull a trailer full of hay and it held up great.
Have had this for a year. Super easy to work with going between a dump trailer hauling logs and my bandit 15xp chipper. Holding up well without any problems.
# 19
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Fantastic product. Not one complaint.
# 20
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 7-1/4" Shank - 14 Hole - 20,000 lbs
Fast shipment and great pricing.
LOVE THES MOUNTING PLATES
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"