# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Came timely and was a complete kit. B&W is by far the best quality turnover ball. Keep it greased and it will work as it should.
A lot of people told me I could not put a goose neck hitch on a 1/2 ton truck. My 2018 Silverado handled the hardware just fine and it pulls an 8,000 lb 3 horse full tack room trailer with ease. I have a 6.5 foot bed - would not recommend this on a 5 foot bed b/c if you jackknife while backing up you will smash your back window. I also recommend installation by a company that does this type of install regularly. I drove an hour to Ocala and had it done at The Hitching Post. They were fair with pricing and easy to work with. Lastly you want to keep a pair of vice grips in your truck to pull up the rollover ball when it is flat. Hay and dust gets in the cracks and it is difficult to pull it up with just your fingers. Overall I highly recommend.
# 2
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I really like the hitch as it was easy to install and being a turnover ball it leaves my bed free when I need to haul something. Very sturdy product and I would recommend it to anyone looking for this style of gooseneck hitch.
Love the Curt C615-632 under bed kit. It maximizes the use of the bed of my truck, and has a clean 4" cap when not towing
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
The hitch went in exactly like the directions said and every part was right on the hitch works great I take the ball in and out with ease very happy with the product good quality hitch
Great product, easy install. On a 2023 Chevy 1500 Duramax, you can unbolt the rear fuel tank strap and get enough room to slide the center section in without disturbing the exhaust piping.
# 4
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Seems to be good quality, fairly heavy built. The ball locking pin does not fully move to the lock/unlock position using the release handle. I'm not sure if it is out of alignment, or maybe has some paint/coating buildup, but I have to pry the pin to lock/unlock the ball from the hitch. I would have hoped for better. Install was pretty easy, the instructions were decent, however, I think the pictures could be better and more of them. They were very dark in color and difficult to see. I also found some of the bolts impossible to reach with a torque wrench to tighten. I suppose there are torque wrenches that could fit in the tight spots, I just do not have one.
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great product, handled my 18,000lb GVW 5th Wheel with-out issues. Fast delivery and great customer service too!
product came on time, well packaged, putting unit together was fairly easy only problem we had was getting the bolts out of the truck bed so we could lift it up to slide the rails in.
# 6
Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
Had to hit one of my rails with a 2 lb sledge just a fuzz to let the tab drop in. The locking tabs are a good idea for the pins. I put my late grandfather’s old classic padlock from his jon boat on one of the tabs. A little nostalgia.
Well built heavy duty fit into the fifth wheel rail with no issue thanks
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I love my hitch . I love how I can turn it over and I can still have use of the full truck bed. I could of bought a cheaper hitch but the quality is by far better than other hitches I have owned in the past. Customer service was great after they helped me fix my ordering mistake. Very happy with my hitch.
I was very satisfied from ordering to instillation. Great people and very concerned about your satisfaction. Instructions were complete and easy to follow. Saved approximately 50% in cost. Thanks etrailer
# 8
Fold-Down Gooseneck Trailer Hitch with Custom Installation Kit - 25,000 lbs
Easy installation solid mounting
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Between the videos and the instructions it was very easy to follow. If you’re like me and don’t want to cut your fender liners I simply removed the front bed bolts and jacked one side up to slide in the mounting rails. The only fender I had to cut was the drivers side to allow for the latch pin lever. I really like just how “flush” the hitch really is once you turn over the ball. Overall very impressed with the hitch so far and have already recommended the hitch to other family members and friends.
This hitch is great and I installed it with no problems. This is the hitch to buy if you want quality and strength. The removable ball stores away and is right where you need it.
# 10
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.
Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.
# 11
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Got this for our new camper last year. Did the installation myself with a few buddies very straight forward directions. We use a Reese goose box with the curt 4” off set ball on our 08 short bed truck! Would definitely recommend
Great product and perfect fit for my 2005 GMC Sierra duramax. I just purchased a Montana fifth wheel and wanted to still be able to use the bed of the truck without taking a heavy hitch in and out and breaking my back. The hitch arrived really fast and the boxes were in pretty good shape and I was only missing one washer from a torn parts bag. I was able to install the hitch that weekend with help of the directions and how to YouTube video. The only issue I had was that the video stated the crossbar with the notch went to the rear while the directions showed it going to the front. It definitely goes to the front and was pretty obvious when installing it. I didn’t have any real issues with the install and it looks great and hides away nicely leaving a clean flat bed. I look forward to hauling my fifth wheel real soon.
# 12
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
2014 F150 Wow, what can I say, this is an extremely solid, well built unit. I knew it was about 90 pound, but when you take it out of the boxes the quality really hits you. Everything fits just as it is supposed to. The bolts are all Grade 8, and when you get everything torqued you know this unit is truly part of the truck frame. Maybe a little over kill for our 5500# Escape 5.0 TA, but I wanted that confidence while connected, and I got it. Coupled this with the Anderson Ultimate Hitch in Black Out and couldn't be happier.
Product was shipped and received within time frame given. Installed nicely, within 3 hours. Had to pry up truck bed, dented from hauling to get hitch in, and hole-saw walked a bit on me, but other than that good install.
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Shipping was super fast and the Product was exactly what I was looking for. Fits flush with the bead and out of the way for anything you decide to haul. And the ball is stored in place without having to keep it somewhere else. Only issue I had was with Chevrolet. They had one of the nuts welded in crooked and I had to do some adjusting on one of the holes. Everything else was perfect. Very well made and instructions are pretty decent. You can watch a YouTube video if you have problems
just dropping a note from ordering and delivery and installation of the b&w goose neck hitch went very smooth installation in about an hour great instructions very pleased
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Ok first off. The paint adhesion of any b&w product is probably the worst I've seen for the money. The paint is the first thing that falls off. That being said if you know that already and take some precautions like I did then you can really easily fix this problem. I sandblasted the back half of my frame and did the 3 step por-15 method on everything. I currently live in Indiana and I do seldomly drive it in the winter but I hate rust and will be moving more south shortly. I por-ed every part that came with the hitch. Every bolt and nut got anti-seize. The bolts are also of basic quality and will rust fast. Anything that was metal on metal contact has a layer of marine grease to prevent the from from rusting in between. I'm extra but I felt that this was the only way to go to protect everything. It's still a great product and hasn't let me down yet.
I shopped around for a long time to find this hitch, then I contacted Jessica of etrailer she listened to my wants and helped me find what I needed at the right price. And shipped it to me right away, etrailer is the best. Thank You
# 15
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Very nice and well built product, the instructions made sense and were very logical. nice to have made in the USA things available. Would highly recommend!
Install went easy, hitch works great. Only issue was the measurement to drill hole in bed of truck bed was off by ½".
# 16
Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Etrailer is awesome, not so much for this product. My first and primary issue is that the safety chain u-bolts are positioned to close to the angle iron brackets to allow clearance for them to freely move up and down with the nuts installed (see photos). I can force them up from below with a hammer and stomped them back down from above. This problem is made worse due to the proximity to the ball, if I dont ensure they arent stomped down as much as possible they would interfere with my coupler when turning. I'm honestly still worried about interference if I find myself in any off camber turn. The other problem I have isnt the fault of the hitch, but now that its installed it is still much more intrusive to the bed space when folded flat than I anticipated. In the past I've had under bed mount balls, this being a work truck I thought the cheaper option would work but I regret that decision.
Etrailer has always come through . Even if there is an issue they respond quickly and that means alot . The prices are the best .
# 17
Remov-A-Ball Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs
great company. order shipped extremely fast, had a problem with ups losing 1 piece but they sent another out as soon as they found out what happened. i cannot give this company enough praise.
# 18
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Difficult to determine installation ease, as I had the bed off my truck while installing. That made it very easy, but instructions were good and its a straightforward process. Very well made, and fit precisely on my truck. I think the B&W system is very tough to beat. Solid and dependable. And their after sale customer service is excellent.
Great service and a great product! Quick delivery and good communication regarding status. Of course it’s a great hitch, it’s a B&W…
# 19
Elite Series Under-Bed Gooseneck Complete Hitch
I think this hitch is great, it was kind of hard to tighten the bolts that are for the chain hooks but after a year it has held up great and nothing is loose on it. I haul our 14k equipment trailer multiples times a week and a 22k gooseneck with our backhoe at least once every two weeks in between jobs. I also use it to move our 5th wheel with an attachment and it pulls really smooth. The only thing is the dust covers won’t stay on but it’s fine I just vacuum them.
I love it. Has worked flawlessly since being installed. Install directions were good with step by step instructions that were easy to follow. If there was any one thing I would knock, it would be the boxes were pretty well destroyed when it got delivered, but that is t necessarily etrailer’s doing. Nothing was missing and all parts were individually packaged. Solid, sturdy, well constructed. Highly recommend for anybody wanting to add a puck system/gooseneck ball to there HD GM truck.
# 20
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Great product w great instructions. It was an affordable package that installed decently. We have used the hitch for a year now and have had zero issues w it. The only reason for not giving it 5 stars was because the cross bars that go between the frame rails needed to have the threaded holes chased w a tap to remove the powder coating prior to installation. I initially tried installing it without chasing the threads and the bolts started to get very tight before the parts even pulled together. Once the threads were clean, everything assembled very well. The hitch takes time to install, at least if you want it to look good and be correct. On a 1500 ram, you will probably need to install some form of helper spring or air bags to prevent the rear from squatting from the weight of the gooseneck trailer…the factory 1500 coil springs are not firm enough on their own.
Ordered this after deciding to go with it over a B&W kit due to me not using it a whole lot and the price difference. When I received the package 1/2 the hardware was missing because the inner box it was in was all broke apart and the outer box was not sealed up. So I would have to give the packaging and shipping one star because I had to go spend an extra $75 on grade 8 hardware. The paper directions were not totally clear on several thing so we resorted to the video which helped a lot. The two large carriage bolts that go in the rear cross member are a little deceiving because the video makes it seem like they slip right in. However, the heads were larger than the pass through in the frame rails so it took quite a bit of extra time and ingenuity to get those fished through there with the plates.(The carriage bolts survived shipping so they were what came with the kit). In the video it showed where he cut a large u out of the inner fender to clear the pull handle and notched the bed that looked kind of sloppy. With a few extra measurements you can just cut a hole in both for handle to slide through and give it a much cleaner look. Definitely recommend putting a bolt through receiver holes and using a strap to hold up center plate through hole in bed after you get it into place. Makes life a lot easier until you get the bolt ls in. Overall this hitch works and functions great. Install went pretty smooth with two people and I would recommend it to anyone needing a hitch.
B and W Turnoverball Underbed Gooseneck Trailer Hitch Installation - 2019 Chevrolet Silverado 1500
Hey everyone, Ryan here at etrailer. Today on our 2019 Chevy Silverado 1500, we're gonna be showing you how to install the B&W Underbed Gooseneck Trailer Hitch. Before we do that though, let's just take a minute, we'll check this out and make sure it's gonna be the right setup for you. So nowadays, even with these half-ton trucks, you know they're capable machines and you can actually do some pretty heavy duty towing with them. And if that's what you plan on doing, that's where a kit like this would come into play, give you that attachment point that you need to hook your trailer up and pull it down the road. Me personally, I'm a huge fan of the B&W hitches.
B and W Turnoverball Underbed Gooseneck Trailer Hitch Installation - 2018 Chevrolet Silverado 1500
Shane: Hi I'm Shane with etrailer.com. Today we're going to be taking a look at and showing you how to install B&W's turnover ball underbed gooseneck hitch. Our underbed gooseneck hitch is not only going to allow us to pull our gooseneck trailers, but when we're not pulling our trailer, it's going to give us total bed access. Once of the nice things about this hitch, is it will also allow you to pull a fifth wheel trailer. It's going to be compatible with B&W's companion fifth wheel hitch. It's going to be a single spring loaded pin.
Best 2017 Chevrolet Silverado 1500 Gooseneck Options
Today we're going to be taking a look at the best gooseneck hitches available for the 2017 Chevrolet Silverado 1500. Let's take a look through the three hitches that we've got picked out. We've got our CURT Double Lock. We've got the B&W Turnover Ball. We're also going to have the Draw-Tite Hide-a-Goose. Now all three of these hitches are underbed mount.
B and W Gooseneck Trailer Hitch Installation - 2016 Chevrolet Silverado 1500
Hey everyone, Ryan here at Etrailer. Today on our 2016 Chevrolet Silverado 1500, we're gonna be showing you how to install the B&W underbed gooseneck trailer hitch. Before we do that though, we'll take a minute, check this out and make sure it's gonna work for you. So a lot of people are under the impression that these half ton trucks, especially the short beds, you're not able to pull gooseneck trailers around with them, and that's just not the case. B&W makes this kit here specifically designed for these pickup trucks, whether it be a 5 1/2 foot bed like we have here today, or a 6 1/2 foot bed. So this will work with both of those.
Best 2016 Chevrolet Silverado 1500 Gooseneck Options
Today we're going to be taking a look at the best gooseneck hitches available for the 2016 Chevrolet Silverado 1500. Let's take a look through the three hitches that we've got picked out. We've got our CURT Double Lock. We've got the B&W Turnover Ball. We're also going to have the Draw-Tite Hide-a-Goose. Now all three of these hitches are underbed mount.
Best 2015 Chevrolet Silverado 1500 Gooseneck Options
Today we're going to be taking a look at the best gooseneck hitches available for the 2015 Chevrolet Silverado 1500. Let's take a look through the three hitches that we've got picked out. We've got our CURT Double Lock. We've got the B&W Turnover Ball. We're also going to have the Draw-Tite Hide-a-Goose. Now all three of these hitches are underbed mount.
B and W Gooseneck Trailer Hitch Installation - 2015 Chevrolet Silverado 1500
Today on our 2015 Chevrolet Silverado 1500, we're going to take a look at and show you how to install the B&W turnover ball. This is an underbed gooseneck trailer hitch with custom installation kit, rated for 30,000 pounds. Part number is BWGNRK1057. Now, here's what our gooseneck's going to look like installed when we're not using it. As you can see, it's going to give us full access into the bed, not really all that noticeable. We'll be able to move things in and out of here without any real kind of an issue.
Best 2014 Chevrolet Silverado 1500 Gooseneck Options
Today we're gonna be taking a look at the best gooseneck hitches available for the 2014 Chevrolet Silverado 1500. Let's take a look through the three hitches that we've got picked out. We've got our Curt Double Lock, we've got the B&W Turnover Ball, and we're also going to have the Draw Tite Hide a Goose. Now all three of these hitches are underbed mount. This is the ideal solution for goosenecks, rather than the old ball that always stuck up in the middle of the bed. These allow us full access to use our truck bed as we want to, we can simply flip that ball over, turn it up into the usable position when we're ready to haul our trailer. Now all three of the hitches are going to have custom brackets.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."