Best 2023 Nissan Titan Truck Bed Bike Racks

The product review/installation video helped me make my selection. I selected the full size pad for 2001 Silverado 1500. Installs easily, fits nicely, flap in pad is positioned for easy access to tailgate latch.

This is my second - I'm replacing one that has worn out over 4 years of use. Used. Worn out. Worn hard. I like it enough I came back for another. Yes, the seams finally pull apart, and the fabric weathers - even the top strap broke. After four years. And I came back for another. This is a great product and mine has paid for itself over and over. Whether hauling one bike, two, three, or four. Highly recommended.

Best truck bed mount out there. Etrailer delivers! Great service prompt delivery and all around great experience. Don't pay double the money when you can get a solid lockable bike mount.

Super easy assembly just four bolts. Works great fits snugly on my Nissan Titan with factory bed liner (without extra bolts!). Very prompt order and shipping. I will use etrailer again.

This works perfectly in my 2007 Nissan Quest minivan. I am able to securely and rapidly store and transport 3 bikes wile keeping 3 seats usable in the van. The base is heavy enough that it stays put so that the bikes stay still and do not knock into each other on the trip. I *might* be able to fit 4 bikes in there, but only if I put down another seat, leaving room for only 2 passengers, so I'll say 3 bikes and 3 people in my minivan is the sweet spot for this. It really is nice that I can load them so rapidly and that the bikes do not have to touch each other.

the product is very good from a durability stand point. But lacking a bit when it comes to flexibility of design. The platform at which the traps are attached could be further re-designed to include the ability to extend or contract to provide a better fit whether the application will be inside the back of a van or on a truck bed. Also some additional suggestion would be looking at ways to anchor the track when use inside a van or SUV. The price I paid for this product i would consider high because of the lack of versatility in terms of use. Would i recommend it? well if you are looking for a nice looking track with traps this would be your choice. Don't get me wrong the quality is very good I just wish a bit more thought was put into it before pricing it. There are other more economical ways to reproduce what this product can be used for; for a lot lot less.

The Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On, is just what I was looking for to be able to build a bike rack for carrying one of my bikes on my motorcycle. It was easy to mount and it holds my bike in place while riding on bumpy dirt roads, city streets, highways and even when I hit some twisty country roads. It's really easy to load and unload my bike when I get to where I want to ride. I use a velcro strap around the quick-release and the fork arm as an added safety as well as a couple tie-downs from my bike handlebars to my motorcycle passenger pegs to help distribute the weight on my rack. If you want to build your own DIY bike rack I totally recommend the Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On.

Love this product! I built a great bike carrying system for my F-150 using two of these fork clamps. They are easy to install and extremely well made. No more tangled bikes and lots more room in the bed for other stuff! Best way to go for a nice bike rack system. Thanks, Phil T.

This product fits over the tailgate of our full size pick up. We bought this product because we wanted to take our bikes with us on our camping trips. We had a receiver bike rack but needed some way to carry our bikes securely while pulling our travel trailer. We also wanted to be able to carry our grandkids bikes. We have secured at least 5 bikes with the Swagman Tailwhip Tailgate Pad and Bike Rack. The only problem we had was that the velcro tie downs didn't fasten as tight as we would have liked. We have used additional bungie cords to keep the bikes in place. That is the reason this review did not get a 5 star. We are very happy with this product.

Product was delivered sooner than expected and is of good quality. Fits 2016 Tundra perfectly. Placement took less than 5 mins, and removal takes about 10 seconds. Mine came with a click strap on the flap where the handle/camera are, which is used to fold flap back over tailgate leaving the camera available for use but securing the flap on backside of tailgate. The video does not show that but to me is a great feature.

Holds my bike securely in the back of my truck. Quick and easy to loosen or tighten. Recommend to anyone making their own bike rack.

These are very nice fork cleats, powdercoated steel and neatly welded. I did need to drill them to 3/8" mounting holes as my bed rail takes 3/8" hardware and these come with 5/16". Once that minor step was complete I was able to bolt them to my bed rail easily. I would recommend these over aluminum fork cleats to anyone putting together a custom bike rack.

Linda and I recently ordered two Aventon Pace 500 NextGen E-bikes from [bike store] in Madison, WI. Not wanting to just toss our expensive new bikes in the back of the p/u when they arrive next month we promptly ordered the Thule Instagator from etrailer. My prior experience with etrailer came as a recommendation from a friend. I was able to do quite a bit of the research on etrailers website, the demonstration video extremely helpful and we placed an order. The racks were in-stock, shipped promptly, etrailer providing a very nice tracking link that included pics of the staff involved in processing the order and a map of the route all the way to delivery. Absolutely 1st rate service. The racks showed up in perfect condition about two days after placing the order, exactly as promised. We are very pleased with etrailer, will most certainly be ordering from them again and recommend this company w/o reservation. Nice job etrailer!

Installed in my Ford Ranger. With the dealer installed drop in bed liner on my truck, my bikes are too long to mount the front tire in the rack as I have less than 60 inches by a couple. So I mount with rear tire and the front tire at an angle in the front corner of the truck bed. Loading is a little awkward. I can’t secure the carriers (I have two) by closing the tail gate as my E-bikes are too heavy at about 50 lbs. each to lift over the closed tailgate. So I have to mount them with the tailgate open, then position the racks where I can close the tail gate with a good fit and then ratchet up the slack of the holding straps. With the bricks mounted this way the security chain built into the carrier is not long enough to go around the main part of the frame in fron of the seat. It has to go on/over the rear part of the frame. With the short trips I’ve taken so far the bikes seem reasonably secure. There is some sway from the front tires, but on long trips I will probably secure some how with a strap. Unloading is also not the easiest, mainly due to the weight of the bikes. Two people makes it much easier. Finally, the carriers could be easily stolen by simply pulling out the ratchet straps or cutting them. Recommend a security chain lock be attached to the carrier and also maybe the bike.

Thanks for the follow up emails. Received my interior saris fork mount carrier and already have people raving about it. Here is a photo for subaru outback 2014 with saris Thanks again

We bought the fork mounts and bike carrier base to use inside my Honda Element. We had been "stuffing" our bikes in the back and securing them with cords going all over the place...and the bikes still shifted while driving. This system holds the bikes VERY secure, even while turning corners. The installation was easy and the bikes fastened up quickly once the front tires were off. This was an excellent investment and I would recommend this system for anyone transporting bikes inside a car.

This is a great way to transport a bike. Just bolt the dirtbag to a surface and attach the fork. I have mine mounted in the back of our minivan and regularly transport my mountain bike inside the van. The dirtbag comes in sizes to fit most fork configurations. I have a through axle for my tandem bike, 100mm for my mountain bike, and now the 110mm for my 29+ mountain bike. They all have the same hole pattern so I just swap them out depending on which bike I am transporting.

Few retailers sell the 15mm x 110mm (Boost) thru-axle mount let alone stock it. etrailer had it and sold it for less the manufacturer. Their economy shipping got it to me (Missouri to San Diego) in under a week. I didn’t want to drill into my truck bed rails so I connected to an existing tie mount via an aluminum angle (see pics). Heavy duty steel construction. This mount will definitely outlast my bike. I’m pleased with the product and etrailer’s service.

The quality of the rack is fantastic. Sadly the keys do not work on the Locking Quick Release Skewers. I've contacted Swagman about this and am waiting for a response.

Excellent Customer service and help for this product. Thank you Carol and Neil your the best.

Easy to set-up, adjust & use. Keeps the bikes secure and upright even on rough 4WD roads. I pull a camp trailer often, so couldn't use a hitch rack, but these are better anyhow because I can keep an eye on my bikes while on the road, plus, they don't stress the frame from a weird angle, the way some racks do. These were definitely worth the money. Very satisfied.

I love this bike rack…I use it for my Mokwheel Basalt…that’s 82 pounds of E-bike…holds like a champ…I adapted it to work with the track rack I installed on my truck…fantastic

It has 7 different areas to strap bicycles down but there is definitely not room to strap 7 bikes down from what I can tell. The straps were a little tricky to feed under the tailgate and pull up at the same time with only one person. Overall it works pretty well but it appears to only have enough room for 4 MTN bikes.

Work good for my Toyota Tacoma 2023 tailgate

I’m a senior and was searching for ways to transport our ebikes without having to lift them. Fortunately I found the Inno Velo Gripper Bike Rack for Truck Beds and installed them on my utility tilt trailer. They work great, were easy to install and no lifting onto a car mounted bike rack needed.

Using the Grippers for carrying 2 ebikes, weighing 55 & 75 lbs. I know this is above the rated bike weights but so far they have performed well. My short bed keeps the 75# bike pretty well locked in front to back so that may help.

I've been using this for a couple of years now. I mainly use it when we go camping. It's been great for carrying the 4 bikes we have. The bikes never have shifted/moved while in transit. The tailgate pad is a little tricky to put on (I lay under the truck and fish the strap up to my son). I've installed the mat by myself but it's way easier with 2 people.

Really like this bike rack for my truck. Easy to put on. Handles the Mtb bikes well.

Product looks great. Fits our Fat Tire ebikes great. But your template is for the smaller mount. No big deal but you should caution customers before they drill into anything.

I bought this for my fat tire HIMIWAY ZEBRA E-BIKE to mount to the rails in my 2018 Toyota Tundra. The mount was sturdy. After looking all over the internet this was the best I could find. The issue I had with it is that the bike weighs 88lbs and it was difficult to get the front fork on the mount. But the bigger issue was the weight of the bike on the mount added allot of stress to the Tundra rail system to the point where it was flexing the front of the truck bed. I did not want to risk the potential damage to the truck through bumps and long hauls . I would definitely recommend this if you have a regular fat tire bike as it’s not as heavy and won’t stress the bed.

Perfect for hauling around my bikes. Super easy to setup on my 2020 Chevy Colorado.

The concept is good and the materials seem fine. The wheels ocme off with the design for attaching it to the tailgate (moves around) and managing the flap. I'm not even sure why there's a flap (useless). The straps/buckles for attaching the bikes are not the best choices.

Not your fault but Rocky Mount. Doesn't really fit fork well as there is MUCH play and screwed in a far as one can go. Is not a 1 fit all for 12 or 15. Needs an additional gasket/grommet to securely hold. With all the extra play I can see the front fork breaking from stress in moving around.

This is an awesome product! I have been using it regularly for the last week and it is spot on. Easy to install and use as well!

Solid mount to Utili-track rail in the back of Frontier Crew Cab