Most Popular - 2 Inch for 2021 Toyota RAV4

I recently purchased a class III Curt hitch, mount, ball, wiring harness and hitch pin for my 2011 Toyota Rav 4. The installation was as described, straight forward and easy. The instructions were easy read and matched the vehicle I have. Everything fit together exactly with no modification needed. Shipping was directly to my door. The unit was undamaged and everything was shipped all in the same box. I have used my hitch several times, and although I an new to towing, I look forward to years of use. I did have to make a quiet clamp for the banging mount with an empty trainer, but from what I understand, this is common to all hitched.

It was a bigger trailer hitch than I needed for my Toyota RAV4, but that was my error in thinking a bigger trailer hitch could tow a bigger load… Which I have since learned is untrue. In any event, it’s getting the job done!

this is a great set of hitches. have used the 1 7/8 hitch for the most part but enjoy having the 2" just in case. I also like the varying distances that they can be raised or elevated for a variety of needs. I am very satisfied. Thank you James J.

Pretty happy with this kit. I like the fact that I can store and carry the ball and mounts in the bag and take them with me for use on another vehicle. I did replace the pin and cotter pin with a locking style pin because this did not appear to be very secure.

Purchased the hitch and wiring kit for my 2012 Rav4. I was going to have a garage do the installation, but then decided to do it myself. The written directions and the available videos made the installation of the wiring and the hitch a relative breeze - and I'm not particularly handy. My hitch lined up with the bolt holes perfectly and the wiring was without drama. All in all a good purchase and I was very happy dealing with etrailer. Hooked up the trailer today and all works as it should.

I have a 2015 Rav 4 and I ordered the wiring harness with the hitch, ball and receiver and it arrived the next day undamaged. I am happy with the quality of this product.

Great Product. Installation was straightforward and took about an hour. The longest part was cleaning the rust out of the weld nuts with WD-40 and the tube brush. Once they were cleaned installation was simple.

Arrived quickly and functioning perfectly

Hitch installation went well after viewing the installation video. The wiring harness video was not completely accurate but provided more than enough visual information to perform the wiring install in a reasonable time. Overall, very happy with product at this time due to easy install due to seller videos. Haven;'t used it yet other than to take a test drive, so, sorry no videos, Etrailer provides a good product with excellent product support. Shipping was very fast and of course the price was right. I would definitely use them again.

Can't wait to get them installed and see how they fit.

Outstanding hitch, wiring harness & attachments. Online help (when given the trailer manufacturer and year) chose correct size and offset for ball to perfectly align trailer and car. You can see the lawn tractor sitting absolutely level on the trailer with the snow flying. It shows why I was in such a rush to acquire the hitch. From online chat with sales agent to her selection of right fit for the particular trailer and car to the ease of installation and the perfect ride behind my RAV4...RATING: A+! Couldn't be happier. Expedited 2 day shipping arrived exactly as promised. So impressed!!! Thank you etrailer for outstanding service. Very happy customer!

I installed two Curt hitches last year. One was for a 2006 Honda CR-V and the other was for a 2011 Toyota RAV4. Both were used to tow small U-Haul trailers across the state and both performed well. They were easy to install. The only downside I have is that the ball mount rattles around in the receiver a bit more than previous hitches I have had. All in all, though, I am pleased with the product.

I have a 2004 RAV 4 and I was trying to get my ball away from the spare tire carrier. I think I probably would have been fine with the next size (shorter) ball mount and still got the job done. The good news is that with the 2 inch drop, I can open the rear door and it just rubs the seal at the bottom of the door a little bit, but I can still easily open the door. I did not want to drop the ball any lower, So this works out well for my rig.

Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

We really like the hitch we ordered for our Camry. It was extremely easy to install. Fit perfectly!

Good price and works as it should.

Superb quality product that solved my RAV4 rear hatch to trailer winch post problem with it's extra long length!! Super fast shipping!! Can't get any better than etrailer!! Thanks!!

2007 Toyota Rav4 owner. I needed this to reach out beyond my spare tire, works perfectly and no clanging or unnecessary movement.

Just what I needed, most receivers would not allow me to open the tail gate on my 2022 dodge ram without hitting the trailers crank used to mount and dismount the car hauler trailer, this receiver give me the extra few inches I needed and it works perfectly, I tried many local sources but they all came up too short, etrailer is the place to go for all trailer parts, they seem to know and sell exactly what you may need

For a 7,500 lb hitch, I was surprised it didn’t have a wedge support welded on where the flat iron is welded to the square tube.

Joann came through on this order. Five stars for her.

It is heavy duty and well-built. I am not disappointed at all and I get comments everyone smile from people who are used to traveling overseas asking where I got the European style hitch from. The only downside is the lack of interchangeability in the size of the ball itself but I don’t think that’s a big deal because I set it up for what I need it for and keep a vehicle vehicle for longer periods of time.

Solid, heavy as heck. Bought this model because 1) I only have 1 lightweight trailer (Malone xtralight, also purchased from etrailer at the same time) and it’s light weight. 2) I am stuffing this into an adaptor also bought from etrailer to further stuff into a receiver also purchased from etrailer. 3) All this is on the back of my 2018 Subaru Outback. Beings that it’s a Subaru it’s not going to be used to drag a huge or heavy trailer. I’ll repeat this part in my review of the adapter, buy probably from etrailer, a receiver lock that is sleeved, to be both 1/22 and 5/8 and long. That way if you don’t want this sticking way out the back (shin killer) you can use 1 lock and go all the way through receiver/ adapter/ and this ball mount. Otherwise buy you’ll need 2 locks 1 for receiver to adapter 5/8 and a second 1/22 to go through adapter into this unit. A side benefit is it’s just different. It’s not an everyday boring looking ball mount, it’s heavy duty so why not.

Super easy install. I had to use a 12mm tap to clean out years of rust from inside the frame threads that received the hitch bolts. Other than this hiccup the process went smooth. Easy ordering and great customer support.

Everything came as described, and I am so happy with the products and service! etrailer.com is my definite go to!!!

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

I am very happy with my trailer hitch receiver from etrailer. I installed one on my 2011 Toyota rav4 for towing a small teardrop trailer I made during the pandemic. I also purchased a wiring harness to power the trailer lights from etrailer and after some doing have it working well. The cost of doing it myself was a small fraction of having the dealership do the work. The hitch receiver is easy to install as there are pre drilled holes to receive bolts in the frame. The wiring is a bit more complicated but I did it. God bless online videos. I'm happy with the results.

Didn't realize the ball was permanently attached to the hitch, as I bought this with the intention of flipping it and using it as a rise hitch. 2" drop too low for my application. Not really worth the hassle of returning, and I guess the fault lies with me.