# 1
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
The product works fantastic! Used it to tow our cargo trailer across the country a few times now having zero issues. e-Trailer did a great job installing and explaining the product and installation process in as much detail as we needed. Thank you!
The item is exactly what we needed. It arrived safely and on time. Your service is outstanding and you are my first "go to" when I need parts and accessories for our trailer. Thank you for all your hard work keeping this business going.
# 2
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
I recently swapped out the stock 2" receiver for a 2-1/2" to allow me to purchase and use this extension to get past the end of my Lance 1010 Camper. I believe I will have no issues now towing any trailer (within allowable spec's) or carrying my motorcycle carrier. Great quality piece. can't wait to try it out...
Have not mounted it yet but it’s what need to flatbtow a jeep behind my truck with a Lance camper
# 3
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
I purchased the hitch extension to accomendate our bike rack to go on the back of our truckcamper. I also purchased the bike rack and steps at all work perfectly together. The extension is very heavy duty and can be used for towing a boat. The only con was not the extension it was the packageing it beat itself up. I also added turnbuckles and safety chain and electrical extension.
# 4
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
The 4 foot hitch performed great. I bought the extra lenght to get it further behind my truck camper, I have a 3 foot hang over. The only problem was this made my 20 foot welded flat boat catch a lot of wind knocking my fuel milage way down. It also does not let my steps fold down. I should have gone with the 3 foot extension. live and learn.
Wow. Who would have believed I could have my heavy 11.5' Camper (which was well stocked, I should add) and pull a cargo trailer loaded with shop tools, workbench, and hardware. Handled well on highways through mountain passes, etc. Assembly and installation should have been much easier but the poor quality of the photos with the instructions was a bit of an impediment.
# 5
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
The hitch worked great. I pulled a 12ft Wells Cargo enclosed trailer with a motorcycle on board. The reason I purchased this hitch, I have a 101/2 ft Lance camper that extends pass the bumper. I used it on a F350. I did use a Equla-I-Zer sway control hitch because of the tongue weight of my trailer and I believe it made this extension hitch work better.
This is a quality product and works perfectly! Easy to install and adjust. They even give you extra chain and turnbuckles.
# 6
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 36" Long
At first I was skeptical but now that I’ve put it together I’m very impressed. This thing is heavy duty and pulls my trailer no problem. Korren did a great job helping me out. Excellent customer service.
The larger of two packages arrived with the actual smaller Torqlift box inside. All expected parts were delivered. The upper tube fit fine. The lower tube was very tight. I first removed some of the paint near the end of the tub with little success. I have the 20k Original Torqlift hitch. I decided to file the inside of the lower receiver and this smoothed out the problem. Then I found that the two stabilizing chains were four links two long for my application. I cut them shorter and PERFECTION! I provided the detail as realistic, but minor issues happened. As shown in the photo, the 36" extension looks very solid and I'm perfectly satisfied.
# 7
Reese Titan Reducer Sleeve 2-1/2" to 2"
This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.
This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension.
# 8
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long
E-tailer folks are very knowledgeable and professional. The Torklift TLE 1648 is a beast. I can't wait to be able to tow my pontoon boat with the AF slide in camper. Thanks for giving me an option to tow my boats.
This hitch extension will be the last extension you will ever buy. It worked great towing my boat behind my 2017 F-350 Dually,( I purchased the 48” cannon) my boat is about 3000 lbs. this hitch is more than capable for towing, just about anything you can pull within Your hitch limits. I have an extended deck on my camper, and I had enough room to turn 90 deg and not be close to contacting the boat. Never bottomed out on a driveway, on my last trip. Quality hardware, super easy install, might need a little help inserting It into the receiver it is “heavy” Overall glad I purchased this.
# 9
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.
Works as it should and I didn't have to turn my power jack on my camper 90 degrees to miss the tailgate when it is lowered!!
# 10
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 42" Long
We have been using Torklift superhitch and supertruss extension since 2010 hauling horses around the US. This extension and superhitch went on our new truck. We hauled trouble and worry free for 10,000 miles this year. Best product on the market.
I can now tow a trailer with up to 600lbs. tongue weight behind my Ford truck with an 11' camper attached. It does everything they say it will do.
# 11
Buyers Products 3" to 2" Receiver Tube Adapter
Worked as it should. Fitment is super tight on my 2020 F350. I would buy this again.
Unfortunately this receiver adapter did not fit my Ford F250 3" hitch, way too tight. Worked with Arthur from e-trailer to obtain a return/refund. After looking at reviews, I see many other folks had the same issue. If I were e-trailer I would pull this item from my product offering.
# 12
TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 42" Long
Heavy duty! Excellent product but did not have the bracket for the tailight extension. Of course the box was destroyed in shipping.
Works as advertised use it with my F350, Arctic Fox 811 Camper and 14' Enclosed UTV Trailer. Peace of mind going down the Road!
# 13
Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
everything fit perfectly and it works great
Have not had a chance to use the hitch extension as of yet but I am sure it will perform as designed. My disappointment is in the following areas: 1) The packaging was very thin and flimsy. Came torn to pieces and it is a miracle the part was not damaged more severely. 2) The harness bracket was bent and I had to bend it back into position 3) The company logo on the end of the hitch is supposed to be a cool chrome piece. It is shiny plastic and is the only thing that is not beefy on the part. I can’t wait for it to break off and just have black steel showing. Think the tool is what I will need and it is what was advertised, just disappointed in the things that were mentioned above.
# 14
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
It does what its supposed to do. I have a 2024 F350 and the sleeve sticks out an inch or so past the end of the receiver because of how the holes line up. I don't think that affects the functionality but would be great if it was flush.
Excellent product, very sturdy. We have been using them on our trailers for years.
# 15
B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
Very disappointed in the packaging. It was thrown in a box with nothing else. The box was ripped on both ends on the side where the hitch busted through. Scratched up around the main hitch part. Mostly from rubbing I guess and the side that were sticking out we’re scared. I did install it anyways but if this is how they ship there products I will not buy again.
Excellent Selection, great products, easy website, super fast delivery, Thank you, etrailer.com!!
# 16
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long
Great product, very stable towing
Worked perfectly for what I needed it to do!
# 17
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 60" Long
It works perfectly to pull my toy hauler behind my slide in camper
Super fast FREE shipping! Easy installation! Much cheaper purchasing through etrailer than any trailer supply shops near my home! I’m a local business supporter but the speed of shipping and price was to good to pass up!
# 18
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long
Structurally strong! Chain and turnbuckles created an extension for my RV extension bumper with storage box. Thought with chains it might need constant re-tightening but has remained tight, after initial trip of 5500mi. Of towing car dolly!
I’ve had the superhitch with 24” extension mounted on my 2013 Ram 2500 for 1 year now and use it frequently to pull my 16 x 7 enclosed trailer with my motorcycle and other gear inside. The hitch and extension give me the towing capacity I need for pulling trailers behind my Lance Truck Camper. I highly recommend the SuperHitch!
# 19
Curt Extender for 2" Hitch Receivers -18" Long
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
Works great. Gives me the space I need to swing my Jeep's tail gate open further so I can access the rear cargo area. One thing that would make it a five star would be safety chain rings welded on so I didn't have to buy more chain to extend the already very long chains all the way to the bumper, which leads to a lot of chain dragging on tighter turns.
# 20
Curt Hitch Extender for 2" Hitch Receivers - 8" Long
The product is 5 star, packaging and shipping is a 0. I am not sure how this hitch extender ever made it to my residence due to the lack of proper packaging (see photo.) When the package arrived, I did not need to open the box, I only had to reach throught the hole and pull it out. This is not the first time I've had issues with etrailer packaging. When I ordered the extender, the screen showed I would receive it Saturday. Received it 3 days later.
As usual you always have what I need. Thank you also for rapid, reasonable shipping.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."