Best 2020 Ford F-150 Raptor Trailer Hitch Ball Mounts

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

Great heavy dury hitch for towing. Less noise than other hitches and does a great job pulling my boat. Love the easy adjusting to height based on terrain where you may need to change this. Worth every dollar and likely a hitch for life.

Love the height adjustment for all 3 of my trailers suuper solid, I get compliments all the time when people see it "wow that things stout!" Keeps the trailer tongue from excessive bobbing, the pins it came with are a huge improvement from the standard Bobby pin style I was used to. Over all I do not regret a dollar spent and would highly recommend to anyone looking for an initial purchase or upgrade their tow life

This hitch is amazing!!! Be prepared though it is very heavy! I love how easy it is to adjust to different heights and ball sizes with the 2 common sizes provided. The scale on the back can be helpful to let you know if you have the proper trailer weight. The more you use it the more you will like it!

I don’t know about bullet proof but I certainly wouldn’t fire a round at this thing. Take a hand cart to the gate with you; they didn’t skimp on steel. Worth every dime. One thing to note: when you’re deciding on drop/rise measurements take into consideration the ‘overall’ height as well as the drop or rise you need. I paid only attention to the drop/rise and now can’t use this for drop, only rise. I needed 6” but bought 8” thinking I’d be clever and give myself a bit of extra just in case. I have a 4WD F250 Crew Cab, stock height. My receiver is at 17” on level ground. The 8” drop is only about two inches off the ground. Bad Bad Bad. I can fully lower my tail gate but with the hitch in rise position it’s really close. Had I bought a 10” it would drag the ground and I wouldn’t be able to lower the tailgate. Zero complaints, only compliments to the manufacturer and to eTrailer. A really well made product.

This is an incredibly well-built hitch! It's not all that shiny or complicated. It is simple, heavy duty and built to get the job done. Everything about the hitch and ball set-up, from the solid 2" insert, the gusset reinforcement, to the 1 piece ball selection, gives confidence of strength, safety and durability. The hitch is nearly 50 lbs of solid steel, I'm very happy!

Mistakenly ordered the 2.5 inch receiver instead of the 2 inch. Ashley replaced the receiver within 2 days! Outstanding service! I will continue to use etrailer.com!

Great American made product! Their 2.5 to 2in sleeve is made in China though!

This is the best hitch I’ve ever owned, and I’ve owned quite a few. It’s easy to use and looks awesome too.

Beside dropping it on my foot it looks great

Super hitch. Best money spent for towing so far. Prompt shipping and a pleasure to buy from this vendor! Thrilled with my experience and will look here for all my trailer and towing needs.

Love these hitches. This is my second one. Honestly, it will save you money. One month a few years ago, I spent $300 on hitches because I would forget or did not have the right height, ball, etc. finally bought a b/w and never had a problem again. I bought this one because I got a new truck with 2" receiver. Great quality, simple, reliable.

Works as it should. I enjoy not having to hunt for different hitches when switching trailers. So far no rust..

Works great, very easy to adjust. Keep a rag near to wipe off grease when handling pins and any covering balls for winter rust prevention. Only issue is when using 2" ball in the lowest position,the 2 5/16" ball opposite hags bellow hitch body and scrapes the ball on pitched driveways with low drop gate trailers

Love these. This is my third one. Wouldnt pull a trailer with anything else. Trannys are expensive.

As a full-time RVer, e-shopping is very important for us. etrailer was the right place to shop. Right product, delivered on-time for a great price. You beat the local discount RV store by $25 including shipping. At the same time, I had another outfit send me a clearly inferior product to the one they displayed. Said they would e-mail a pre-paid shipping label for the return (didn't) and tried to put the blame on Amazon. Thanks etrailer for a great experience !

Love being able to have access to both 2" & 2-5/16" balls without having to haul around 2 hitche's and then the height may not be right. When I'm not using I can leave it or stow it with very little effort.

Etrailer shipped out the bw hitch and the second one arrived on time. They worked to resolve the usps issue. The representatives were polite and helpful.

Best hitch anyone would need. A+

Heavy duty. Extremely well made. Even came with the grease. Simple to install and looks great! This will make it simple to switch between hauling the trailer, pop up camper and splitter. Oh, and shipping was wonderful!

Very pleased with product, looks awesome on my lifted 01 Ford Superduty F-350. This 10 inch drop allowed me to keep my trailer level when hauling my 4 wheeler. Just in time for opening day.

Product looks and feels great. Only reason it got a 4/5 is because a truck driver friend of mine told me that he had one and the shank wore down from rubbing on steel bc of the aluminum on steel receiver contact. I might rig up a thin steel collar for it to prevent any degradation down the road. Works great on my truck with 7 inches of lift and 35" tires. Buy the Andersen Stainless steel locking pins for it so it doesn't walk off. New pins have better corrosion resistance and are less easily picked by thieves than standard barrel locks, plus they match the look.

Great fit and finish looking forward to the first tow with it.

This is a must have for full-time trailer hauling. No ball grease needed. Easy to adjust for a level trailer, smooth towing. I increased my trailer tires to light duty truck tires (a little taller tire), for heaver loads & ease of mind to haul at 75 mph speed. This hitch allow me to fine tune the trailer ball height for best setup on my heavy duty Toyota Tundra truck.

Great, the only problem I have is the balls are getting loose the hex bolt is tight

Works great and looks great! I ordered it because the dimensions from the truck to the ball is the same as a “standard” hitch so it didn’t protrude out very far. Others extend out far and are knee breakers.....can’t go wrong with this one.

What do i like about this hitch…i tow trailers requiring both size balls andmits easy to flip this around and adjust tow height. Its lightweight and easy to take on and off when needed. The built in locks keep the hitch on my truck. I like it and recommend it.

I purchased this to replace a Fastway Flash E Series Ball mount that I purchased and returned from another online seller that did not provide enough clearance from my rear bumper in the rise position. My vehicle really needed the extra 5/8ths of an inch of length on the shank of the Rapid Hitch. Clearance was not a problem in the drop position; but with a receiver that's 18-inches off the ground, I need to use the rise position more frequently than many. The other thing I noticed is that this ball mount is feels more substantial than the one from Fastway. In use, I prefer this to the Andersen EZ hitch I had been borrowing. It looks really cool. It has 5 adjustment positions rather than four and bit more adjustability in either direction. Plus, it still fits in easily in the storage area underneath the floor of my SUV. And did I say it looks really cool. I hated to put grease on the ball before I went to hook up the trailer. Also, I plan to get the lock set. It's looks great on my SUV and seems likely to disappear overnight and look great on someone else's vehicle.

Arrived today. Fast shipping, and thank you for that! Seems to be a quality ball mount. Just what I needed to get the ball lower to tow my trailer. With this, now the top of the ball is at 16" where it needs to be. Custom built receiver on my old moving box van. Just need to weld on safety chain slots and paint it. Can't drop the lift gate with the receiver in (its pinned on both sides), but hey....I can tow now.

Tow infrequently; got new(to us) 2015 RAM 2500 pick up to tow our 38’ touring travel trailer. Have a HD WD hitch & adjustable sway control hitch set up we use for this trailer, but needed a drop hitch for our smaller Travel trailer& misc use haul trailer,,,,both much lighter & do not require the sway control set up. This drop hitch & ball fit the bill perfectly as the needed drop did not provide suffice t ground clearances to utilize the WD hitch mount setup (which was not needed) for those smaller loads. E-trailer worked w us to get the product we needed & an option that was inexpenve but sufficiently rated to pull our smaller trailers! Very happy our results !

The hitch I ordered came very quickly. I was able to track it and I pretty much knew when it would be at my door step. The hitch was more then I expected Heavy Duty. Awesome quality and more features then I realized. The fit was perfect. I will be using the hitch on a front mount receiver on my 2014 Silverado.

Excellent Quality... Best price and fastest delivery! Everyone with a towing package needs one of these in their vehicle...

Very nice ball mount. Smooth, one piece design. Unlike my previous ball mount, it's long enough (enough straight length between the pin hole and the beginning of the bend) to accommodate a Blue Ox Hitch Receiver Immobilizer II, yielding a nice, tight connection. Attractive polished finish. Made in Taiwan (according to the box it came in). Photos show it attached to a Hidden Hitch Class III Hitch Receiver, secured with a Blue Ox Hitch Receiver Immobilizer II, and a Curt 40053 2-inch stainless steel ball.

Great looking product and fast service as usual. Now I can keep it clean and stored under my seat without the grease and rust issue. The ball mount with the 2" Brophy stainless ball and the Master Lock Pivot Hitch pin work perfect. Thanks, Garland R in Kentucky...…….

To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

This ball mount fit the SUV just right. I needed a 5 inch rise and the mount angled away from the bumper. However, the load capacity was way more than I needed, but the fit made up for that. It's a little loose in the receiver so I will be adding a stabalizer to lock it in place.

Did not work on my truck due to custom rear bumper. Looks great on my friend's 2018 F350 4 X 4 diesel!

Great service, came quickly, works perfect on our truck for hauling trailers and various loads.

Great product. Extremely well built and looks great. Very easy to put into stow mode and move it back to the positions you want to tow from. The rated capacity of it is great it’ll do everything your truck will do in a bumper pull mode. It is a must for a 19 F-250 with the ride height to get your load level and to make the connection a easier process.