Most Popular Stores on RV for 2018 Lincoln Navigator

Great product at a great price. Unbelievable fast delivery time!

So easy a caveman can do it. Great material quality, etrailer was fast on shipping, and hd support ready if needed. I consider myself an intermediate mechanic sk I had no problems doing this by myself. Instructions were good, I modified to make some install details easier and emergency link better.

The product works great. I love all the light features on it. Easy install and easy of use. Using the product with my RV and Jeep Gladiator.

The Nighthawk tow bar is very nice and easy to hook up. However, the electrial connection from "Towed" to Coach exits the left side of the tow bar and crosses under the receiver to connect to the Coach socket which is on the right side of the receiver. This causes the electrical cable to get tangled with the safety cables. It seems as though there should be separate parts for coaches with right or left connectors. I moved my Coach connector to the left side of the receiver to eliminate the tangle of the electrical cable with the safety cables. The tow bar is easy to connect and disconnect and store. Mine connects to the Roadmaster Spare Tire Carrier receiver which works well. I did have one incident where the electrical cord was somehow severed which meant that I had no operating supplemental brakes and no "Towed" lights. I did not know when it happened or how it happened. There should be some alarm when a disconnect occurs. I found the problem only because I stopped for a break and inspected everything. Since my "Towed" is very light and I did no hard braking, I did not notice the loss of supplemental brakes.

We've been towing our Jeep Grand Cherokee for about 8 months now with this tow bar and it's worked flawlessly! We've been places where the coach and Jeep are not perfectly aligned putting the attaching pins in a bind, but with a simple release of the handle it would release the arm and unbind the pin. Super easy to use. I highly recommend the Nighthawk All Terrain, Non-Binding tow bar. OH! The LED lights along the arm make it look great too!!

Very nice tow bar. I like the way it stores on the back of my motor home.

This is one of the best, two items I purchased of about 6 or 7 items acquired to rig my 2001 GMC YukonXL for flat towing. The 10,000 lb capacity is valued. the tow bar slides work well. the 3/4inch pins are strong and I have had no problems. The tow bar pulls a YukonXL with some extra stuff, fuel and tools and weighs probably 6,500 lbs (my est--haven't put it on a CAT scale). When I rig my 2020 Chev Silverado Trail Boss to flat tow, I expect to be able to use this.

Easy to install in place of an old Falcon towbar. As you can see in the photo it can be rotated to the side and latched in place. I needed this feature as we carry two electric bikes above the towbar. looking foward to not needing a rubber hammer to release the tension on the bars.

This tow bar is a beast! I'm replacing my existing one (same model) after over 20,000 miles of pulling a Jeep Cherokee behind a class A motorhome. It has taken a beating on a trip to Alaska and back to Texas, including an incident where the wind blew me off the road and put the Jeep on 2 wheels. A frost heave that bent the RV Tow receiver but not the tow bar. As well as a car driving into the back of the Jeep while I was towing at 65 mph. Can't say enough about the quality and durability of this product!

Excellent product. Towing 4 door Jeep Wrangler Sport.

Everything arrived timely and well packed. Upon opening, all contents were there and in great shape.Extremely good service! I would order again from etrailer!

Great price, great product. Wish Demco would put a locking hitch pin with their product. Pay the company that much money and you get a standard pin. I think Demco should send a locking hitch pin standard with all of their tow bars and a normal hitch pin with the cotter pin clip optional. Or, just include both, but definitely a locking pin standard with all tow bars.

Demco has made MANY improvements over the original Excalibar I purchased 18 years ago. Some of the changes have been with the safety cables being better organized; the main 'towing' bolt being perpendicular to the towing pull tension; being able to adjust the assembly to accommodate a more level alignment between the powered and towed vehicles by 'flipping' or turning over the yoke. Also, it is much easier to store the assembly with the newer pin and plate arrangement, instead of the previous pin system which required getting on the ground and attempting to pin the shaft to secure the tow arms. In addition, the tow arms now have the ability to hold themselves up while you are in the process of disconnecting the tow bar from the powered vehicle. I have not towed my truck behind my motorhome as of yet, so I can't say how it will disengage and be non-binding on the arms for storage. One of the issues I had with the old Excalibar was being somewhat difficult to release and disengage after a trip. Hopefully, that issue has been resolved.

The Demco Excali-bar 3 is proving to be a great purchase. Having owned a previous model Demco, I am very pleased with the current model Excali-bar's new improvements!

First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.

Was simple to install. The only hard part was installing the backing nut with the wire handle. That could be done different.

Fantastic customer service and delivery of my tow package in time for Christmas to me !!!

I have purchased other items from etrailer and as usual the delivery is easy to follow and produce as advertised.

I ordered this tow bar and D ring adapters specifically for my Bronco and it’s way to sloppy and I can’t use this to tow my Bronco

Make towing easier for a person like me to tow I would recommend it very good product