Most Popular etrailer for 2017 GMC Canyon

The wiring kit for the tow base kit was very well engineered and works very well. The videos for installing the base plate we're awesome step by step process and was very easily accomplished by someone with just a wrench and a drill and a few tools.

Would have gave it a full 5 stars if it would have actually fit into the receiver. Tried both my extension receiver and the OEM 2 inch receiver. Would not budge. Had to grind off the powder coating and then some. Now I need to then repaint to prevent rusting. I would have returned this if I didn’t need it now. Better quality control is needed on the e trailer brand. Guess I know it won’t rattle, lol. Buy a mainstream brand.

1st, the package with “Blue Ox” plates did not include the 3/8-16 nuts ??. [I have doubled nutted the bolt]. The install was straight forward.

Good design but poorly manufactured. Used on a single, multi-week trip: Bar stayed on the RV. Removed when we got home and the powder-coating has cracked and bar is showing rust inside and out. Chrome on extending arms is pitted and beginning to rust. Emailed etrailer but Cody informed me that I would have to ship it back at my expense without any commitment to replace! Disappointed with etrailer after years of previous purchases

etrailer has been just what I need it as a first time tower of a Rv tow car there experience and courtesy of helping someone with no experience has been a huge relief with something so important there help was invaluable all the way through Thank you so much

Very easy to use and handled as well as I expected.

First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.

Was simple to install. The only hard part was installing the backing nut with the wire handle. That could be done different.

This tow bar replaced a 10k Blue Ox that was older and lots of miles towing heavy pickup. I wanted to replace with new tow bar for piece of mind. It was important that I had a non-binding tow bar because I have a 43’ MH and tow a full size crew cab pickup and more than not at rv parks and my driveway is pickup not completely straight and 100% level behind MH. If that’s the case I struggle to release arms. Sometimes both or just one depending on angle. Even if vehicle is slightly angled I have to fight it. Description states quick disconnect even on rough terrain. If that means uneven terrain I disagree. Also, the tabs that hold arms in when not in use are a joke they are not designed for a HD tow bar. Those came loose after just a few uses. Strut boots would have been nice but not a biggie. I like that the safety cables are integrated in to arms and has an electrical cord holder. Tow bar is EZ to hookup to my pickup and tows perfect. I don’t want to be negative (to late) but I would not buy or recommend because of disconnecting issue.

First time flat tower so can't compare it to any others. Installs easily and stows out of the way nicely. Build quality looks Very good and look forward to our trip. I've only done parking lot test drives.

Great purchase and suggestion from etrailer. This thing is so easy to hook up to the Jeep and we couldn't be happier. We've only towed a few times, but already the wife has taken over hooking up the tow bar while I hook up the Brake Buddy in the Jeep. Easy to hook up, just as easy to disconnect after you arrive. I wish we had done this years ago!

Very rugged tow bar. You will need this cover: Roadmaster Tow Bar Cover Item # RM-055-3 because the arms don't lock in the short position so they just slide out to the extended lock position when stowed without a cover.

Have not used this yet but it gives me all the features I was looking for including the 1.5 inch lift . Note that the unit came in the lower position so if you need height you have to reverse the head. It is not that hard to do and just take your time and connect to the back end of the Rv to start the process.

The etrailer XD non-binding tow bar is and Excellent product. I received it a few days after placing the order with Sara R. At trailer. She was very knowledgeable about what all the equipment that I had ordered for my setup. Thank you Sara.

One word. Fabulous! The SD tow bar is a superior product. I don't want to say bad things about the most popular tow bar out there, but etrailer SD is just better engineering. Watch the video for the product. My Roadmaster base plate was installed by Dave C. Of [company] with great expertise. See the pics

Bar has worked fine. The clevis ends attach to the rod with a single 3/8” bolt each, so only two little bolts attaching your up to 6000lb vehicle to your tow vehicle, seems excessively light, but it hasn’t broken yet…

SO FAR IT WORKS GREAT, I PULL MY 2006 JEEP WRANGLER BEHIND MY CLASS C E 450. ITS VERY EASY TO HOOK UP AND UNHOOK.

I love this tow bar, I have one that is probably 10 years old minimum and bought this one to replace it, easy to hitch and unhitch without binding!

Tech support was easy to get ahold of,but took multiple calls to get someone to respond back,tech emailed customer service,but didnt contact me back.Overall it works ,put 300 miles with no issues