Most Popular 5th Wheel Camper for 2017 Forest River R-Pod Travel Trailer

Great product. works just fine. The problem I had was matching the mounting plate under my trailer. Apparently not a standard so I had to take it to a trailer manufacturer to make it fit.

They went on a custom made trailer build that’s not yet in service. Seem to function as advertised.

Quick shipping. I will be ordering more parts as I need them for our RV.

We replaced four badly worn 2500 lb jacks with these heavier 5000 lb jacks and are very happy with the quality of these new jacks. They arrived quickly and were a perfect fit. The construction is superior to the jacks we replaced. Your instructional videos were very helpful. Thanks for your excellent service.

if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.

The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.

Ordered a power stabilizer jack for my 2012 Jayco fifth wheel in 2023 , easy to install the item myself , stabilizer working great , will buy future items at this site , thanks

The stabilizer works well. I would buy it again

Perfect! My weld for rear bumper was in the way of the bracket, so I just swapped 1 bracket each side from the old jacks, jacks were same size but rated lighter weight. Thanks for quick delivery! Always like the tutorials and pictures.

The box was a bit beat up when it arrived, but hopefully everything is intact.

Absolutely a breeze to replace the old jacks. They hold the trailer up with ease.

These stabilizers are much better built that the ones that came on the trailer. The lift components are sturdy and the screw shaft is bigger diameter.

These things make a great trailer jack. A plate on top and your done. Tried bottle jacks, these are great.

Great replacement

I received the stabilizer and it sat in the shop for weeks before I was able to inspect it due to outage work. After removing the old stabilizer I opened the package to find it was incorrect. There was no motor,switches, wiring or fuses basically the manual version. After contacting Etrailer and explaining the problem they sent 2 motors, no mounting bolts or all the other electric. Was told it was past the 30 days for shipping proper material,WTF. Extremely disappointed, no more business from me.

Installed on a 2018 E350 Ford Minnie Winnie. The package arrived really beat up but only a single cover was damaged. It was replaced quickly. Nothing was missing. I had to shim it down from the frame about 1.5 inches using a bar of 1.5"x3"x 24" inch aluminum stock on each side. Then it would clear the fuel tank and the gray water. Switches are installed in our garage under the bed. Wiring came from power panel which is fairly close to the switches so it all went fairly well. Wire nuts are not recommended so I had to hunt around to find connectors that would work. I have not used it for camping so do not how well it will work to stabilize the vehicle. We do a lot of boon docking so will have to have some good blocking to level and stabilize. It feels a little better sitting on the street. I do wish there was a lockout for them being raised before moving the vehicle outside of PARK?

I really enjoyed working with Lauren she really knows the product line and the Ultra fab landing gear work far better than I expected. I have a 2019 Genis Supreme 33CKXL I highly recommend this product.

I recommend this landing gear set to everyone!!!!! After 2 replacements of tandem landing gear sets performed by dealership under warranty and still struggling lifting my 5th wheel, I decided to purchase this upgrade on my own dime. Best money I’ve spent in years. These lift my 15,000-16,000 5th wheel with no issues. Consistent and quiet. I don’t stress out anytime I’m hitching or unhitching anymore. 100% recommend buying. I’ve already talked 2 of my friends to do this upgrade and they love it.

These were a great addition to my custom army overland trailer, m1101 they are super easy to use and work perfect to level out when it's time to camp

These jacks are even better in person! Very heavy duty, great construction thus far. I opted on the top plate and used my existing holes on my rig to bolt on vice welding them. I used a step bit to drill the top portion of the stabilizer. I couldn’t be happier. I love the sleek look from the front and gives my rig a more customized look. I put these on my 2021 Rockwood MiniLite 2509s.

Received the Kit in about four days (5 Stars for etrailer). The shipping container was severely damaged (2 stars for UPS), but at least it arrived. Did not appear any parts were missing. I ordered this kit because it was less expensive for the complete kit then to replace both landing gear legs separately. I left the 5th wheel attached to the truck and removed the old landing gear, gearbox, and motor prior to the arrival of the new system. Keep all your parts. The new kit arrived and was very easy and straight forward to install. However the tubular steel expansion rod that connects both landing gear legs was too short. I had to use the my old connection rod. Also the spacer used for the inside of the large side of the connection rod was not included with the kit. Had to use the old spacer in the old connecting rod. I used my old landing gear foot plates and pull pins on both landing gear leg extensions. Once installed, the kit worked flawlessly. I placed red marker tape on the landing gear extensions so not to top out the legs when lifting. Again save all your old parts.

New landing gear for my 2012 Cougar 5th wheel. Delivered on time (box was pretty beat up) all the parts were there and it was a perfect fit! Installed it myself in about 1 1/2 hours Bonus, it was cheaper than at Amazon. Highly recommend e trailer !

Etrailer was great and shipping was fast. However the shipping was abusive to the packaging resulting in bent shaft on leading jack, which made it impossible to install gearbox for proper operation. Being mechanically inclined I could disassemble and straighten shaft hoping no stress fractures ending its life sooner than expected, or use shaft from previous jack. But why? I bought new parts for a reason.

Delivery was on time, but the box it arrived in didn’t fair we’ll and parts were hanging out of the box! But everything was accounted for and the parts were well wrapped. Installation was very easy. The only issue was the locking pins mount plate is tack welded to the primary leg that the motor moves up and down. Those mounting plates had to be removed to install the lead and follow jacks. A grinder made short work of that. I didn’t put the mounting plates back on, instead I used my spring loaded pins that were on the old legs, they were still in good working condition. Also I didn’t use the adjustable cross over rod that came in the package . I opted to use the one that was on my old jacks, it was constructed of heaven gauge tubing and didn’t have a much (slop) movement in it. Also did not use the plastic housing gear box, I purchased a aluminum house gear box from e-trailer a few months back and used that one keeping the plastic for a spare. Very satisfied.

Replacement for bent camper stabilizer jacks, these work great.

Very solid and well built, exceeded my expectations. Mounted tonight and the camper is now solid as a rock when parked. It only had rear stabilizers previously and at 19 feet needed the stability in the front. Wifey says previously it felt like she was on a water bed when I was walking in the back. Not any more!

These are incredible! I have a teardrop camper that came with "scissor" type stabilizers, and they almost immediately broke. They were very difficult to raise and lower and I needed an impact drill to make them work, only weeks after delivery. Unfortunately the company went out of business and I was forced to find my own solution. eTrailer.com to the rescue! I bought 2 sets so I could have one on each corner of my Teardrop Camper. I got them welded locally for just over $300, and couldn't be happier. These drop down straight with just a bit of ground clearance. Although the primary purpose is stabilization, I could use these to jack up the whole side of my camper to change a tire now. No more going underneath and jacking it up manually anymore. I love how they can be set at an angle or straight up and down. My only question is why didn't the builder of my camper put these on in the first place! If I am going to have stabilizers that are used every time I go out, why not have the best? Love these, highly recommend.

Product works great. Any 3/4 inch socket can raise and lower the jack. Fully adjustable from vertical to ground to perpendicular and many stops in between. They can rotate to work on left or right side. I drilled and bolted them on. No problem.