Best 2016 Volkswagen Golf SportWagen Bike Racks

All in all pretty good. The arms that grab the front wheel have loosened a little bit and move side to side. They have never failed, just feel a little wobbly. The hitch receptacle is also hard to tighten but might be due to the receptacle it self. Used rack on a long trip and the bikes moved slightly side to side, but nothing serious.

Click to Enlarge

Car: 2017 Honda CR-V This is a great rack! There's not a lot to the assembly, other than getting the first two long bolts in, those were tricky. Once those were in there, aligned properly, the rest of the assembly was pretty easy. Attaching the rack to the hitch receiver was the easiest part of the whole thing! The rack is really nicely portable, and will easily store in our apartment during the off season. It takes less than a minute to get it loaded into the hitch receiver. The cable lock is a little bit flimsy, but should hopefully deter casual thievery. What I would have loved to have seen were locks in the retaining arms as well, so those couldn't be messed with by strangers. Otherwise, this rack is really great, and I would highly recommend it.

Click to Enlarge

Good sturdy rack. Heavier than I anticipated. Assembly instructions were poor. No mention of which washer go with what or what side is up on the wheel holders. I ended up zooming the PDF 400x to see a clear illustration.

I like the overall design of this rack, but unfortunately after hauling a couple bikes around for a while the point where the crossbar connects has apparently rounded off so the rack swings back and forth. I've used rope to tie the ends of the rack to the car to stop this from getting worse, but it's inconvenient. Note: the hitch connection itself is good and solid, but the point where the crossbar connects to the bar coming from the hitch has gotten loose and there's no way that I can see to tighten it.

arrived quickly and has no damage. I haven't had the chance to try it out yet.

etrailer has the best pre- and post-sales customer service I've ever seen! I started out not knowing anything about hitch-mounted racks. So I wrote to etrailer telling them about my car and type of hitch I was about to have installed. Samuel wrote back with lots of great information tailored specifically to my car. He even included a photo that looked just like my 2017 white VW GTI with a hitch and rack installed. Okay something of a coincidence. But the rest of the assistance I got from the crew at etrailer was just as prophetic. I went into this a novice and came out knowing lots more about hitches and racks and finding the rack best suited to my situation. I have a small car, a class 1 hitch and a heavy mountain bike. I got exactly what I needed. As to the Swagman rack itself, it works fine. If I had a different situation I would probably buy a platform rack as they are easier to load. There's no reason to buy a bike rack anywhere else.

Click to Enlarge

I’ve had the Kuat Sherpa for about a year now and could not be more happy with this bike rack. When not in use I keep it safely in the garage- it only takes a few minutes to install it to my Honda Civic and safely secure two bikes using its exquisitely engineered and designed system. I’ve used this for 900+ mile trips with no issues whatsoever - the perfect bike rack!

After doing extensive research before buying my first ever bike rack, I chose the Kuat Sherpa 2.0 platform rack. I considered trunk mounted, hanging and platform racks before settling on a platform rack. I like the stability, the ease of loading and unloading and very importantly, the absence of contact with the frame of my bike. My bike has a beautiful paint job that I want to preserve. I looked at lots of racks online and at a bike shop and opted for the Kuat Sherpa 2.0 because of the excellent engineering, including the design of the packaging that becomes a work bench for assembling the rack, the relatively light weight (32 pounds), the inclusion of a hitch lock and a bike lock, the stability of the platform, even with a 1.25" connection and a class I hitch, and the ease of operation. Additionally, the overall appearance of the rack suggests high quality. Time will tell how well it ages but I'm pretty confident that I'll be pleased with it. I was very fortunate to find a used, like new Kuat via Etrailer at a meaningful discount that still qualified for the manufacturer's warranty! Thank you Etrailer! A tip to pass along that was shared with me, U-Haul is an excellent source for buying and installing hitches to accommodate bike racks - very attractive pricing, high quality installation and a super unlimited lifetime warranty. Can't wait for Spring and the chance to transport my bike to inviting riding venues!! PS The hitch and bike rack work very well with my 2011 Honda Accord Coupe, EXL V6 model that remains in excellent condition.

At the age of 70, I needed a “friendlier” mounting and bike access rack. A platform rack seemed to be the solution. I had one caveat. My Subaru Forester had a 1and 1/4” receiver (with a non-standard 3/4” length mounting hole). My Volvo had a tuck away 2” receiver. After some research I gravitated toward Thule only to find out they had no solution for my above conundrum. In fact their customer service offered no interest in solving my problem which others also must have had. More research…enter Saris! An American made company with an innovative solution. I quickly received my SuperClamp EX-2 from ETrailer along with excellent customer service support. The ease of constructing the unit for use and the obvious structural integrity was immediately apparent. My wife couldn’t believe how easy it was to use and to stow away on my garage wall after use. Thank you Saris and ETrailer for a wonderful product and experience. I guess American made is still alive and well. I highly recommend this product and the associated companies.

Purchased this bike rack last year and am very pleased with the stability of the rack. The straps and clamps secure the bike well to the rack. Some things that I learned: When attaching the rack onto your hitch, it helps to put a piece of tape on the rack (hitchtite) once you have lined up the holes. This will make it easier to find the exact location of the holes the next time that you want to use the rack. Finding the exact location allows you to smoothly hand tighten the bolt to the end of the hitch. At that point, just use a socket wrench to finish the tightening. When putting the bike on the rack, I loosely secure the clamps to the tires at first. This allows me to rotate the tires to find the right location in the wheel well for the straps to go around the spokes. I next secure the bike with the straps and then fininsh securing the clamps to the tires.

At age 75, I have purchased many bike racks over the years…..this one has no equal in loading and unloading…

Click to Enlarge

This rack is really, good. The only thing i add to make it better is small strap that holds the front wheel to the front wheel bracket. I never had a problem with it, but i like to make sure it is secure. It is a solid bike rack and worth every penny. I would buy this over the Kuat version any day.

Click to Enlarge

This thing is built like a tank! It is of the best fit and funtion I have seen in a bike rack! Solid as can be, fits my bikes perfectly and looks awesome! Plus it folds completely out of the way to access the rear liftgate on my 2022 Rav4!

Click to Enlarge

Click to Enlarge

Great service from etrailer and the rack arrived as expected. Fairly easy assembly. OK video on Kuat’s site, but didn’t cover the foot pedal. Really glad we got the 2” hitch. It tightened up and we’re impressed with the quality and the stability of the rack. We haven’t done a road test yet, but look forward to putting it to the test. We have a Ford F-150 and it works great. The bikes were fairly easy to load with the batteries out and two people. We do need the strap extenders for our RadMini Step Thru’s. The tires are too big for the ones that come with. Only one set of extenders came with the bike and one adapter for a smaller tire. It’s okay, but since it’s a two bike unit, would have been nice to have both extenders. Otherwise, we are really liking the look and stability.

Click to Enlarge

This bike carrier has a clean design and it assembled and attached to the roof rack easily. A locking front cover prevents it from being detached from the roof rack and the tray has a cut out in the front for a disc brake if my next bike has one. Once everything is snug, the bike feels solid and there's no slop.

Click to Enlarge

I'm not too sure how to rate this but I'm not happy with it. Everything that happened is no fault of etrailer. I've made many purchases from etrailer, they're a great distributor. The bike rack appears to be great. The problem seems to be that they changed the design. To start, UPS damaged the box in shipping and then tried to tape the package they sent me. After walking through the parts in the box with an etrailer rep on the phone, it seemed that no parts were missing. So I proceeded to connect everything up based on the instructions. As I put it together I noticed the mounting bracket in the rear doesn't have anything to remove the slop. The rear is literally resting on a slider, which means that it would rattle when driving around. Just for kicks I took it for a drive with my bike on top. It rattled like crazy! So I looked at the installation videos on etrailer and then youtube. Every one of them showed an extra rear mounting bracket with knobs to tighten. These were not listed in the install manual so I suspect Rhino thought they could cut cost by eliminating them. I contacted etrailer to see if they had any. They didn't. So I returned it. Sadly, I still had to pay a $25 restocking fee. I'm not sure why etrailer charged me. It's not like I bought the wrong thing and didn't want it. It's actually a really nice bike carrier. Just a flaw in the design that etrailer should catch when they test it out in their videos. If anything, I've helped them out with this. Hopefully etrailer will test out what I sent them, then reach out to Rhino about this new design flaw. Again, I like etrailer as a service but I wish they had caught this before selling to me (and others). I strongly suggest that you don't buy this until the bracket issue gets resolved. Also, take a look at the last pic of the Inno XA391 on the etrailer site. They resolve the rear bracket rattle by putting in a thumb screw.

So close! This rack is great, with a few caveats... First, it's almost too small for an XL (21" frame, 29" tires) mountain bike. I had to completely remove the adjustable wheel holder thingy on the rear arm (brace? lever? support?) to be able to properly fit my bike. Not a deal breaker, but not really working as intended, I think. Second, the front mounting bracket is... middling. It doesn't have a lever like the rear, and so tightness is purely dependent on how hard you can twist the little knob. Also, there's only one in the front, unlike the double setup in the rear. The brackets, themselves, aren't designed particularly well. I'm not sure what crossbars they were using as a baseline, but the angles just don't make sense. (at least to me...what do I know) What I do know, is that they don't grip the factory Outback crossbars very well, and I found myself constantly adjusting and tightening them to where I wouldn't get any sliding left to right on the crossbar. (I did finally get it to where I was satisfied, but it took some doing, and I imagine it would be like that every time if you wanted to take the rack off occasionally.) TL,DR: Does the rack do what I need it to do? Yes. Is the fitment a bit frustrating? Kinda. Are there other similar options out there? Not many, and none that I could find at this price point. Would I recommend, or buy again? Yes and Yes.

Click to Enlarge

The bike rack worked well until the ratcheting teeth on the track became worn. Now I can't tighten the tire hold levers. I contacted customer service in March, and they said they would contact me when the replacement part came in. It's now November, and I'm still without a working bike rack. Definitely inhibited my mountain biking this summer, which was a huge bummer.

Great Service. I ordered a bike rack. The package was damaged during shipment and a few small parts were missing- they shipped out the missing parts quickly and with no hassle. I would definitely recommend this company to others.

Works as expected coming from Thule. Etrailer is great to deal with. Only problem is side clips have to hook on window glass on VW sports wagon.

Seemingly well-constructed and supported bike rack. It fits my 2018 Toyota Camry SE just fine and I haven't had any issues with sway or even feeling my bike while driving. I've only carried one bike on it and have used it a limited number of times, so I cannot speak on durability and longevity. Although you shouldn't open your trunk while the rack is attached, I have been able to do so with no issue (without the bike attached).

While getting a bike rack for a sports car isn't ideal, I really wanted to transfer my bike with my own car instead of borrowing my friend's pickup truck. After hours of trying to find a bike rack that would be good for my 07 Mustang, I decided to give this one a try and I gotta say, it has been pretty good so far. It fits very well over the factory spoiler. One of my biggest concerns I was worried about when ordering a rack for my Mustang was ruining the paint, but the feet on the legs haven't left one scratch. I have used this to transfer my bike at freeway speeds (up to 80 mph) on car rides that typically last an hour and my bike was perfectly secure throughout each ride. For extra security, I wrapped both bike wheels with a ratchet strap so the wheels and pedals wouldn't shift in transit. So far, I am very pleased with this bike rack for the price and quality. I would highly recommend this if you want a rack that is affordable and durable.

Click to Enlarge

Performed perfectly on a 140 mile round-trip in my 2017 Acura MDX. It took me a few tries to position the anchors inside the top of the hatch, but I got the hang of it and the rack did not shift at all while driving 50-60 mph on the highway.

Excellent quality! Bike rack comes fully assembled. Cam locks hold the upper support and the bike arms in position and are very easy to use.fairly useless included cable lock. Will only work if you always carry 3 bikes. I just used my cable lock and had no problems transporting my bike to the trails.

Installed all products after having watched videos and read through pdf instructions. The Yakima JetStream roof rack system is outstanding (with one exception) - instructions and videos facilitated the installation. The Yakima system is the only one I could find for my car (Mercedes E450 Coupe), as the car's panorama roof glass extends to the edges near the fixed mounts. The Yakima system is quiet, thanks to the ability to modify the crossbar pitch angles, and has a high-quality appearance that complements my car. And it is rock solid. The Kuat Trio bike tray is an outstanding low-cost, simple solution - well-designed and well-executed and installs to the Yakima JetStream bars flawlessly. I would recommend that Kuat include a 12mm x 100mm thru-axle in the Trio kit, as I had to purchase that part separately. Only disappointment is in the Yakima Landing Pad Covers that ship with the Landing Pad 22 (LP 22) kit. The covers do not snap tightly into place, and appear as if they were designed for a different Landing Pad. In summary, my Yakima/Kuat bicycle roof rack system exceeds expectations (except for the LP 22 Covers), operates flawlessly, looks great, and stores easily. It has given me high confidence in Yakima, in Kuat and in etrailer.com. Well done.

Click to Enlarge

Click to Enlarge

Great rack easy to install, light weight and well made.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This is the first bike rack I have ever owned. The rack will be used primarily for me to transport my bike to training rides and triathlons. Occasionally, we will transport 1-3 additional bikes if my husband or sons want to go on a ride. In the past, I had to remove my front wheel in order to fit my bike inside my 2013 Toyota Highlander, and we weren't getting more than one bike in there. I went with the Saris based on the recommendation of a triathlon coach/mountain biker. My husband and I mounted the rack onto the car without difficulty. It is easy enough to get on or off by myself, which is useful since we will not be leaving on the car permanently. Thankfully, with it mounted, and the arms folded down, my 2013 Highlander fits into the garage with no problem. One useful feature that I discovered is the ability to position the arms closer together for my shorter bike. I attached photos of the arms attached all the way wide, or a little narrower. I noticed just a minor amount of movement of the rack while I drove, but it was mostly while I went through a construction zone that has a lot of bumps. Even then, it didn't seem unstable. Additionally, I used a small bungee cord to strap the front tire to the cross bar of the bike, to reduce the movement of that tire. I would recommend the Saris Bones Hitch without reservation.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Holds 3 light bikes comfortably. Adjusting semi rigid straps a bit difficult for me, depending on angle. Hitch rattles some tho I imagine it needs this amount of "give." Recommded by a friend I trust.

Overall I am happy with these bike carriers. They mount to the racks over the bed of my Tundra TRD Pro. Installation is simple. I think they could be just a bit sturdier because there is just a bit of wobbling when driving on bumpy roads but I'm not too worried about them coming dislodged. Take note that although they come with a cable lock to attach the bike to the carrier, the key is sold separately.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Very good product. It holds the bike securely on the roof without contacting the frame. It is easy to adjust from my road bike to my 29er mountain bike. Our drives are all relatively short, so I like that I do not need to remove the front wheel to lock in the bike. It's also nice that the SKS locking system allows me to use the same key for this rack that I use for my Yakima roof box and hitch rack. This is my first roof rack and I chose this route for a couple reasons. Some of the roads we travel to get to our trail heads are a bit rough and with a roof rack I don't have to worry about bottoming out a hitch rack hanging off the back of the vehicle. Also, it takes up less room in the garage. Our vehicle is a 2000 Jeep Grand Cherokee with an additional 4 inches of ground clearance. That makes it a bit of a reach for my 5'4" wife, so we take our two-step along to help her. This is my third time purchasing from etrailer, and each experience has been very good. They are a very customer service oriented company. I really appreciate all the additional information they provide on their products, especially all the videos they produce to aid in reviews, assembly, and use.

Click to Enlarge

The people at etrailer are excellent in communicating and following up. The Rocky Mount BrassKnuckles Roof Rack for Fat Bikes is well designed and came with comprehensive instructions. It fit my Thule aero blade racks wonderfully. My Motobecane Sturgis now sits proudly on my Volvo wagon. I have driven up to 60 MPH with my bike on the roof with no drama what so ever.

Click to Enlarge

Excellent service from etrailer. Had to slightly modify rack arm to accommodate 27.5 x 4.5 w/ 150mm fork and studded tire, but I sort of expected that. The bike rack is sturdy and strong, I expect it to meet my needs. Thank you Rocky Mnt and etrailer!

These were perfect to mount on my motorcycle tailer. The raised front wheel allowed me to fit it over a cross brace on the motorcycle wheel chock.

Click to Enlarge

The Malone Roof bike rack I bought at Etrailer is perfect. It is simple to mount on the roof and simple to mount a bike on it. At one point I use it to drive my bike all the way from Ottawa Canada to Richmond Virginia, some 1,100 KM. The bike is so solid attached with Malone, there is no single movement of it. I strongly recommend to other to buy it.

I truly appreciate the follow up. To make it plain and simple, my family is incredibly excited to own this product. Your team did an incredible job walking through the right product as I could not find a custom hitch for my BMW X6 cross over SUV and you guys nailed it! From the hitch, to the bumper I had to get replaced, it works like a charm! I have been and will continue to recommend your company and staff! Top notch professionals if you ask me!

I love the bike rack itself, I only have 1 problem the first lock that fastens down with the key does not work. It’s really hard to grab and spin, my father worked on it for quite some time and was frustrated. I was wondering can you send me a regular twist down handle like the other 3? I don’t need the key lock, or send me a new one with the key lock since this one is defective? Other than that its great, we just got it on my vehicle last night but I cannot use the very first bike clamp. My sister in law is asking how I like it because she wants to get one too, no worries I will tell her its awesome, I understands there are flaws and I know you will hook me up with a new clamp. I will post a great review once I get my new clamp.

First-time rack buyer / owner / installer. The rack arrived in a timely fashion, maybe a day or 2 ahead of schedule. It was well packaged. I’m LOVING this bike rack. It was easy to put together and to mount on my new Honda Passport. Thus far, no squeaks in my 2” receiver. Hardest part of initial set-up is figuring out the best way to position two bikes. Trial & error and some patience. The directions weren’t clear as to where the 2 left-over screws went. I found the answer in another review and have posted a pic in case others have the same problem (photo with pen pointing at screw). These screws go in the underneath side of both of the folding arms. They appear to keep the wheel wells from sliding off in case in you drive with an empty, un-folded rack, and forgot to tighten down the wheel wells. The folding arm push / pull pins can be difficult at times. I coated the tips with some lube. That and a little jiggling seems to solve that issue. I guess it’s better for the pins to be snug vs popping right out. I added a small Master lock to the hitch pin (in lieu of the provided cotter pin) as a theft deterrent. I read that a 3/16 shackle lock will fit into the bike clamp down arms to also act as a deterrent. I had an old 3/16 lock that did snugly fit and appeared to be locked. HOWEVER, I yanked on the lock and it came open as there isn’t quite enough clearance for the shackle to lock. I discovered that longer 3/16 shackle locks are hard to find. Have attached a photo of the lock that actually fits and works (Ace Hardware). One lock on the upper clamp down arm will secure both arms as the lower arm can’t be removed without removing the upper arm. The clamp down arms appear to be coated to prevent damage to your bike. I’ve tried a simple rag and ultimately settled on pool noodle pieces as a precautionary measure. I CAN NOT open my tailgate (regardless of whether or not the rack is fold up and in the bike carry position). If that’s a concern for you, then spring for the more costly titling version. My back-up camera still functions.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The Swagman XTC-2 platform bike carrier arrived very quickly from etrailer and in good shape, the actual carrier box is inside another shipper box, which I'm sure helped with its condition. Assembly was relatively quick and painless, even though the instructions could be a little more thorough. Installing the carrier on the back of our Jeep Patriot also was quick, it helps to have an extra ratchet & 3/4" socket laying around for just this purpose. Installing the bikes takes a little patience and trial and error the first time you try and put them on the carrier. It's easy enough to adjust the wheel holders to fit the wheelbase of your bikes, but for us at least, the challenge was trying to swing the vertical support bar up into position after putting on the first bike (closest to the Jeep). We couldn't angle the bike enough toward the Jeep to have the bar clear the bike. We learned that the easiest way to secure the first bike was to remove the ratcheting frame hooks altogether, put the bike in the carrier, swing up the vertical support bar, put in the pin, and then slide one of the frame hooks down on the bar. The outside bike is much easier because you can set the bike in the carrier at whatever angle you need, not being limited by the back of the vehicle. One thing we did to protect the bike frames was to use some foam pipe insulation as cushion between the frame hook and the frame (see pictures). Once you get a system for installing the bikes, it is very quick to load/unload them. The rack seems to be well made and doesn't wiggle excessively when traveling. All in all a good product for a good price, would definitely recommend it for anyone looking for a platform bike carrier.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The NA391 roof bike rack is sleek and stylish looking. It's light and seems to be pretty aerodynamic. At the same time, it appears to be pretty sturdy. Once clamped to my INNO roof rack system, I can grab the track of the roof bike rack and pull back and forth enough to rock the whole car without it moving on the roof rack system. I would give it 5 stars but for what I believe is a design flaw that INNO seems to have overlooked. Due to the curvature of the roof on the Tucson that the Inno rack system is mounted on, the front clamp of the bike rack does not sit flat on the INNO crossbars. The bike rack comes with a spacer to use under the rear clamp to level the rack. But the bolts on the clamp knobs are too short to use the spacer. I don't understand how INNO could miss this design flaw in their own product. Even with just the thin strips of rubber spacers on the bottom of the rack on top of the rear crossbar is almost too much for the bolts on the knobs. INNO needs to look into this flaw and correct it.

Click to Enlarge

Click to Enlarge

I like the bike racks…I ordered two for my INNO roof rack load bars…good quality and reasonably easy to install. I did not realize etrailer also carried the same type of bike carrier that will slide directly into the T-Slot track, otherwise I would’ve gotten those instead…Oh well, that’s the way it goes sometimes.

Click to Enlarge