# 1
Optronics Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - White Base - Red Lens
These lights are really good for the price! (I ordered 16) They aren't cheap feeling or flimsy. They feel sturdy, durable and they look quality. The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing. The light is sealed very well and it takes some effort to remove the lens cover. The lens is thick and the color is true. The reflector is bright. I was genuinely impressed with lights especially for the cost. These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home. My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth. These MC32RB and the Amber version lights will look great! Slightly different style, same size and better looking and better quality than the originals. Very happy with lights and etrailer. Will be ordering more items. Thanks. G.
This is a good quality light, water tight and worked well. It has been on the trailer for over a year now and still has no issues. The lens can interchange on other similar bases, but if the base is old and damaged like mine was, this is a great replacement.
# 2
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side
First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.
My replacement lights came quickly and were quite easy to install.
# 3
Low Profile LED RV Tail Light - Brake, Tail, Turn - Passenger - Rectangular - Surface Mount - Red
Bright….! The exact replacement.
they fit, water proof tape needs to be included for the price.
# 4
Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
Lights were an easy, direct replacement for the incandescent factory lights that came stock on the trailer. Splicing was necessary but the wiring colors were accurate as this is the same manufacturer as oem. I am hoping the LED style last longer than the original. If not I will switch to another brand.
These are great. They fit into a 2x4 piece of steel C channel very nicely. This makes for a very strong and easy to mount combo that actually holds up when pulling the trailer off road. The stock tail light housing was very thin and would rip off going over uneven terrain, not to mention the oval lights would vibrate out. These lights bolt on and won’t fall out.
# 5
Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Amber Lens
These are exactly what I was looking for
Installed on a 93 Skeeter boat trailer. Very tight fit. Had to turn the light sideways and push through Grommet to install . Right now I have it installed but until I take the boat out this weekend, I will not know if I have the wires plugged in correctly. 50/50 chance of getting it correct. Shipping was very fast.
# 6
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.
The clearance lights work perfectly. The sales lady went above and be beyond to make sure they were correct. She even went back in the data and found a previous order I made. Very professional!
# 7
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - White Base - Amber Lens
Easy install. Be sure to check base of wires on the light. The severe bend in them can crack the insulation and may cause issues. One of mine had it and had to doctor it up, otherwise 5 stars.
I should have looked at the photos more closely, as the wiring comes directly out of the rear of the light. The wiring on the OEM light I replaced was a bit more flexible for mounting the light on the fronts of the two fenders on my tow dolly. Also, the mounting holes for the hardware were a larger diameter than I expected, so I had to use washers to keep the smallish bolts from pulling through. On the other hand, the LED lights are brighter than the incandescent bulbs in the OEM lights and they will NOT come loose from road vibration as did the cheesy bulbs and bulb mounts in the OEM lights. Overall, a definite step up for use. The only complaint was the extra time deciding how to accomplish the wiring and mounting.
# 8
LED Clearance Light Assembly for Trailer Fender - Trailers over 80" Wide - Driver Side
Nice lights, a bit over priced but work well. I have them mounted on my trailer so I can see the end of the trailer in both mirrors when traveling straight.
Thank you perfect fit.
# 9
Optronics LED Trailer Clearance and Side Marker Light w/ Reflex Reflector - 6 Diodes - Amber Lens
We have upgraded all our trailers to LED. This is the first light we have replaced in 7 years. We use etrailer for all our trailer lighting.
The cover almost fit perfectly. Well built. Held up well to a harsh winter. A surprising find was that it keeps our fifth wheel dust free on the inside as well as the outside. well worth the expense.
# 10
ONE LED RV Combination Tail Light w/ License Plate Bracket - 4 Function - 1 Diode - Driver Side
It was an exact replacement. Works great. Thanks
Terrific upgrade in my opinion. The installation was pretty easy for me. The light is slightly smaller than the original and I have the corrugated sheet metal siding I did not experience any led hyper flash with this light. I was slightly concerned about this after seeing videos of people changing to led light bulbs on the tow vehicle. This light was plug and play. 4 stars because the manufacturer did not provide a wiring diagram :( I don’t feel you should guess what wire goes where. The least they could do is tell you what they (the manufacturer) wired for ground. In my case, the white was ground, same as my trailer wiring. However I needed to connect green to black to get my turn signal to work. Your situation may be different. Would I buy it again? At this time, yes. I’m hoping this light outlasts my usage of this travel trailer- which should be for many years.
# 11
Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber
Very bright light, same connectors as my 2001 Shoreland'r boat trailer, just had to plug them in. Cannot say enough about the staff at etrailer, very helpful.
SPLENDID! Popped the old incandescent Side Marker Lights out on my 2008 Triton 21X2 trailer and installed these Thinline LED Clearance and Side Marker Lights (both the AMBER and RED ones). Just Plug-N-Play and my boat trailer looks AWESOME! Shipping was a snap!
# 12
Incandescent RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangle - Surface Mount - Red
This product was received in perfect condition and was exactly what we ordered. This is the exact product on our trailer now and we were pleased to find a replacement at such a reasonable price. Unfortunately, when we attempted to remove the lens from the base, one of the clips broke. I just ordered another one. Fingers crossed it doesn't break this time.
All I really needed was the lens but I ordered the whole light to have spare parts. Fits perfect.
# 13
Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long
Replace the LED strip under my Awning on my Jayco trailer with these and used shrink tubes to make the connections water tight also . Work really great!!
Great service! My order was shipped the same day as my order. The lights are high quality for a good price. Will definitely be using etrailer for my rv needs.
# 14
Screw Mount Reflector for Truck or Trailer - 3-3/16" Round - Red - Qty 1
I've bought many items from etrailer..com over the last 2 years and I am quite happy with the products and the shopping. Thanks, John Nelson
I bought them for a replacement for a aircraft belt loader that I'm restoring
# 15
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
I had to upgrade my previous LED lights that i purchased years ago from here as they were all blown out minus 1 bulb on each side. These lights fit right into the preious bracket with the previous gasket and they light up well.
Sturdy, bright lights. A great addition to my hitch-mount bike rack.
# 16
LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Oval - Red Lens
Installation was easy. The fit and design matched the original. After a year, the light still works perfectly. My only regret is that I waited so long to replace the original broken light.
Perfect match for my existing trailer running lights. Came on time and just as described. Trailer makes everything easy!
# 17
Incandescent RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangle - Surface Mount - Red
I couldn't find taillights for a 50 year old Shasta travel trailer,so I bought these. The wiring is little different but these will work.
Light arrived within a day or two of order. Perfect match to OEM light currently on trailer. Easy to install. Very satisfied with product and service.
# 18
Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens
These exactly match the originals on our 1973 Airstream.
These worked great at upgrading my old trailer marking lights. Still working great a year after install.
# 19
LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Black Base - Amber Lens
once installed they should look nice
It had no gasket to seal it to the fifth wheel
What our customers are saying:
"I was very pleased with the promptness of the delivery of my order, and the products were exactly what I needed. I highly recommend your company to anyone needing anything to do with trailers. Thank you"