Most Popular Non-Submersible Lights for 2016 Jayco Jay Flight Travel Trailer

Have not installed yet but looks as described.

These lights are really good for the price! (I ordered 16) They aren't cheap feeling or flimsy. They feel sturdy, durable and they look quality. The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing. The light is sealed very well and it takes some effort to remove the lens cover. The lens is thick and the color is true. The reflector is bright. I was genuinely impressed with lights especially for the cost. These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home. My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth. These MC32RB and the Amber version lights will look great! Slightly different style, same size and better looking and better quality than the originals. Very happy with lights and etrailer. Will be ordering more items. Thanks. G.

This is a good quality light, water tight and worked well. It has been on the trailer for over a year now and still has no issues. The lens can interchange on other similar bases, but if the base is old and damaged like mine was, this is a great replacement.

First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.

My replacement lights came quickly and were quite easy to install.

Bright….! The exact replacement.

they fit, water proof tape needs to be included for the price.

Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.

The clearance lights work perfectly. The sales lady went above and be beyond to make sure they were correct. She even went back in the data and found a previous order I made. Very professional!

Easy install. Be sure to check base of wires on the light. The severe bend in them can crack the insulation and may cause issues. One of mine had it and had to doctor it up, otherwise 5 stars.

I should have looked at the photos more closely, as the wiring comes directly out of the rear of the light. The wiring on the OEM light I replaced was a bit more flexible for mounting the light on the fronts of the two fenders on my tow dolly. Also, the mounting holes for the hardware were a larger diameter than I expected, so I had to use washers to keep the smallish bolts from pulling through. On the other hand, the LED lights are brighter than the incandescent bulbs in the OEM lights and they will NOT come loose from road vibration as did the cheesy bulbs and bulb mounts in the OEM lights. Overall, a definite step up for use. The only complaint was the extra time deciding how to accomplish the wiring and mounting.

OEM product for a great price

They were very knowledgeable of what I needed and part was delivered very quickly.

Was the same size as original equipment.

We have upgraded all our trailers to LED. This is the first light we have replaced in 7 years. We use etrailer for all our trailer lighting.

The cover almost fit perfectly. Well built. Held up well to a harsh winter. A surprising find was that it keeps our fifth wheel dust free on the inside as well as the outside. well worth the expense.

I ordered this product as an exact replacement for the one I had to replace. Placing he order and checkout was extremely easy. Via there website I was able to track the entire process from ordering, handling and the shipping process. Etrailer is company I have in the past and will continue using.

Our tail light quit working during our vacation - we checked with a local RV shop and they told us the part was on back order and they wouldn’t have it for 4 weeks. We found it on trailer and ordered it and had the light in 4 days delivered to the campground we were staying at- Thank you etrailer!!!

Perfect fit for replacement. Quick shipping.

perfect fit on a 2015 Aliner , etrailer is the best!

It was an exact replacement. Works great. Thanks

Terrific upgrade in my opinion. The installation was pretty easy for me. The light is slightly smaller than the original and I have the corrugated sheet metal siding I did not experience any led hyper flash with this light. I was slightly concerned about this after seeing videos of people changing to led light bulbs on the tow vehicle. This light was plug and play. 4 stars because the manufacturer did not provide a wiring diagram :( I don’t feel you should guess what wire goes where. The least they could do is tell you what they (the manufacturer) wired for ground. In my case, the white was ground, same as my trailer wiring. However I needed to connect green to black to get my turn signal to work. Your situation may be different. Would I buy it again? At this time, yes. I’m hoping this light outlasts my usage of this travel trailer- which should be for many years.

This product was received in perfect condition and was exactly what we ordered. This is the exact product on our trailer now and we were pleased to find a replacement at such a reasonable price. Unfortunately, when we attempted to remove the lens from the base, one of the clips broke. I just ordered another one. Fingers crossed it doesn't break this time.

All I really needed was the lens but I ordered the whole light to have spare parts. Fits perfect.

Just got my lights they look great but l will have to wait till it warms up from -15 to install them

Tail light delivered on time and easy to install . LED’s much brighter and visible than the original incandescent bulb. Nice lights!

Quite easy to install and fit my Coachman Freelander perfectly. The prior ones were not sealed, filled with water, and blew the fuse fuse. Beware of the cheaper version on Amazon as they have the same poor seal problem as the original lights which died after <5 years.

Command Triple LED Tail Light Review They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system. This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow. Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.

I needed a tail/stop light for the rear of my Fairmont railway motorcar and thought from your on-line description that this product would be satisfactory. I was right, it is a good size and bright enough to be very visible in bright sunlight. As you can see from the pictures, to make it match aesthetically I attached the lamp to an aluminum plate cut to fit in an old auxiliary lamp housing. The railway car runs in both directions hence has head and tail lights on both ends. I am very satisfied with this light.

The replacement light was an identical replacement for the OEM part, it worked perfectly and fit exactly as the previous part.

Installation was easy. The fit and design matched the original. After a year, the light still works perfectly. My only regret is that I waited so long to replace the original broken light.

Perfect match for my existing trailer running lights. Came on time and just as described. Trailer makes everything easy!

I couldn't find taillights for a 50 year old Shasta travel trailer,so I bought these. The wiring is little different but these will work.

Light arrived within a day or two of order. Perfect match to OEM light currently on trailer. Easy to install. Very satisfied with product and service.

These exactly match the originals on our 1973 Airstream.

These worked great at upgrading my old trailer marking lights. Still working great a year after install.

Very pleased with with my first order with etrailer.

once installed they should look nice