Best 2014 Toyota Sienna Trailer Hitch Ball Mounts

No issues or problems. Everything was as described.

I bought a hitch, stinger, ball and wiring harness for my 2004 Toyota Sienna. It was delivered fast, it was the right stuff, and it fit, just like it was supposed to. It really was as easy to install as it looked in your video. The video was immensely helpful too. The video showed me exactly what I needed to know to get my hitch installed correctly and it gave me the confidence to order online and do it myself. The only drawback is a loss of ground clearance but you warned me fair and square up front about that, so I can hardly complain. Thank you, that was a good investment.

This is exactly what was needed - we are pulling an 800 lb., single-axle lawn trailer and this setup is working very well. Installation took one afternoon and we were up and working the next day. THANK YOU!

Using this on my 2004 Toyota Sienna. Clears the bumper just fine and I like the easy functionality of changing the ball size. Sturdy construction!

Purchased this a a hedge on hoping I would have the right part, and in that respect, it worked (barely). After mounting a 76112, I found my hitch receiver tube to be at 12" above the ground. I will be using the 5" rise ball mount with the 2" ball as my ball mount to attach a rental trailer which would like the ball to be at 18". That leaves a 1 7/8 ball and additional hitch ball mount to come up with something creative to do with.

Product was a kit priced below the individual pieces to allow for trailering different pieces of equipment with differing heights and sizes hitch balls.

No issues or problems. Everything was as described.

Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.

Very sturdy product but hole for the ball was drilled off center - shifted 1/16" to the side. etrailer kindly replaced the original after seeing a picture showing the fault.

Came quicker than expected. All good .

Exactly as advertised. No problems. I used it on a Toyota Sienna, which has a very low hitch receiver. I'm pulling a small utility trailer.

Plugged right in. Worked great on my 2008 Toyota Sienna Van. Great information on correct size. Easy. Thanks

Flipped it for hight on a Toyota Sienna 2015 - Works Great!

I bought the Curt D210 Multipurpose Ball mount to raise the level of a Kuat platform bike rack with extender for 4 bikes from my Drawtite hitch on a 2007 Toyota Sienna. Service from eTrailer was superb, the mount is extremely well-built, and it fits my Sienna/hitch like a glove. We used the rack with 4 road bikes on two trips this week-end and it worked flawlessly; not even a minor scrape through many driveways and turn-ins. The system does move the rack back a few inches; 50.5" from the bumper, so we needed a red flag on the end (at least in MO). This is the only nit in an otherwise great product.

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

Not a lot to say abou this other than the build quality and finish being excellent. As I said with the other part to this 3 part order, this company is Excellent to do business with. Professional. Great follow up.

With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The hitch on my Sienna is mounted low and recessed under the bumper so this ball mount has been perfect for the right height and reach for my boat trailer to ride level. etrailer is the only place I found what I needed. Actually I always look there first because they have such a good selection.

fits like a glove. works perfectly

The hitch on my Sienna is mounted low and recessed under the bumper so this ball mount has been perfect for the right height and reach for my boat trailer to ride level. etrailer is the only place I found what I needed. Actually I always look there first because they have such a good selection.

etrailer shipped fast and had great communication. The hitch was built very well look like a quality product and was just what I needed. The 5 inch rise was perfect for our 2009 Toyota sienna.

Click to Enlarge

Love the ball mount. I have a Toyota Sienna and the rear seats recess into a well, therefore the receiver hitch much go underneath the well. This means the ball mount enters the receiver approximately 10 inches off the ground. By using the ball mount to raise the ball, this makes the ball around 22 inches off the ground, which is recommended height for my trailer. My only regret is that I did not request you attach a ball as I did not have any wrenches large enough to fasten it. Again, the mount is great. Thanks, Ron Baker

Well made

There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Came quicker than expected. All good .

Exactly as advertised. No problems. I used it on a Toyota Sienna, which has a very low hitch receiver. I'm pulling a small utility trailer.

Strong and works perfectly!

Great product, Fast shipping, Good Price

No issues or problems. Everything was as described.

I had trouble finding a 4-3/4" rise at any local stores. Etrailer shipped it out in a reasonable amount of time. Using this to pull a small trailer behind a Toyota Sienna and needed the 4-3/4" rise. Packaging needs some thought. 2" ball was coming out the side of the box when it was received.

Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.

Very sturdy product but hole for the ball was drilled off center - shifted 1/16" to the side. etrailer kindly replaced the original after seeing a picture showing the fault.

We used this on our 2012 Sienna AWD to pull the largest single axle closed top U-Haul trailer to move furniture and bikes 400 miles through the mountains of PA, WV, and VA with no trouble. I noticed less jerking from the hitch being transferred to our van than the last time I towed a trailer like this (though that was with a large sedan). Easy to install and seemed to have decent tolerances in regards to fit and finish. Definitely increased my confidence in towing with a light duty vehicle.

Love the ball mount. I have a Toyota Sienna and the rear seats recess into a well, therefore the receiver hitch much go underneath the well. This means the ball mount enters the receiver approximately 10 inches off the ground. By using the ball mount to raise the ball, this makes the ball around 22 inches off the ground, which is recommended height for my trailer. My only regret is that I did not request you attach a ball as I did not have any wrenches large enough to fasten it. Again, the mount is great. Thanks, Ron Baker

Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.

Fits perfect. Now my trailer is not hanging down anymore. It's level when it's hooked up. Thank you.

Very sturdy product but hole for the ball was drilled off center - shifted 1/16" to the side. etrailer kindly replaced the original after seeing a picture showing the fault.

Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.