# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I had tested while driving with the hitch ball on it and with it on the lowest setting it would scrape against the ground when I am going down a slight slope. I had to switch it to the highest setting to avoid it, it still scrapes so I just leave it off until I need to start towing things.
Perfect fit hitch,wiring kit super easy, great price and shipping. We will be repeat customers when we purchase another vehicle!!!!!!!! Thanks for the great service!!!!
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
All in one kit is Very convenient. but before you order, ensure the rise/drop of this ball mount is correct for your hitch/trailer. Also - there is a gusset plate welded on the back of the ballmount (Drawtite 2953) in this kit, - on the 2010 Dodge Caravan with the Draw Tite Class III hitch,this plate just rubs/touches the bumper, so this draw bar can't be used on 2006-on Caravan.
Nice little bag to store the extra ball and the ball mount when it is not in use. This is an excellent product, pulled my trailer within minutes of installation without a problem. Great feature with the removable ball, includes the 1 7/8" and 2" ball, this is awesome. The 2 3/4" rise fits my Caravan and trailer like they were custom made for each other. The trailer rides almost PERFECTLY level with the trailer. Put an actual level on the trailer after hooking it up and it is only a hair off the level, and of course this is probably due to road conditions. Great product at a fabulous price! I have informed all of my friends and family where to go for all their trailer needs. Thanks ETRAILER.COM! ! !
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
I bought this separately when I bought a new hitch. It appeared to be less expensive to buy the hitch, ball mount, and ball all separately. there's not much to say, just get the one with the correct amount of rise/drop for your car and trailer. 2" rise is what I needed for my Grand Caravan and jet ski trailer.
All ordered parts arrived in good condition, and were correct. Impressed with on time delivery. Hitch and wiring harness were a perfect fit. Only had trouble finding correct wire from brake light switch on 2016 Dodge Caravan .
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
The web site is so informative with reviews and how-to videos that it made the decision very easy to determine what drawbar kit I needed for a 2012 Grand Caravan. I like the fact that I did not need to talk to customer service to figure out what I needed, all the information was available. Price and shipping was very competitive and I received the order in 3 days.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 6
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
# 7
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
The purchase was what I expected, it was well packed and delivered very quickly. I would order from etrailer.com again.
# 8
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Looks well made and arrived very promptly
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
# 10
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 11
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
Delivery was delayed from the manufacturer. Further delay was encountered when shipment was mis directed to Sheboygan. When it finally arrived there was a hole in the box and the receiver was poking out. Lucky the paint wasn't damaged. The part is what I ordered.
# 14
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 15
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Great product
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 16
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 17
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
# 18
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Great hitch, easy to use and a great value.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 19
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
# 20
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
MaxxTow Tow Strap Loop Review - 2014 Dodge Grand Caravan
Today on our 2014 Dodge Grand Caravan, well be test fitting the MaxxTow tow strap loop for 2 hitches, part number MT70029. This heavy-duty, hitch-mounted shackle adds an attachment point for strap, cable, or rope to be used in agricultural, industrial, or recreational applications. Well begin our test fit by sliding the shank into the opening of the hitch and securing it with the pin and clip. Keep in mind, the pin and clip are sold separately. With that, that will complete todays test fit of the MaxxTow tow strap loop, part number MT70029 on our 2014 Dodge Grand Caravan. .
Draw-Tite Ball Mount Review - 2014 Dodge Grand Caravan
Today, on out 2013 Dodge Grand Caravan, we'll be test fitting the Draw Tite ball mount with a 3/4 inch rise or two inch drop, rated a 7,500 pounds, part number 2923. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 13 and 1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style, or other after market accessories. We'll now begin our test fit by sliding the shank of the ball mount in the drop position into the opening of the hitch. We'll insert the pin and clip to secure the ball mount to the vehicle. We'll now measure from the ground to the top of the ball platform getting a measurement of about 11 and 1/4 inches.
Curt Tri-Ball Mount Review - 2014 Dodge Grand Caravan
Today on our 2014 Dodge Grand Caravan, we'll be test fitting the Curt Tri ball mount for two inch hitches, part number C45001. Before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 14 inches. Keep in mind this measurement may very due to tire size, hitch style, or other after market accessories. We'll now begin our test fit by sliding the shank of the ball mount in the opening of the hitch and securing it with a pin and clip. This ball mount is a great way to tow different trailers with different size couplers. It has a 2 5/16 inch ball, a 1 7/8 inch ball, and a two inch ball. This is a great way to tow multiple trailers without additional ball mounts. Since this ball mount has no drop or rise, if your vehicle's hitch height matches your trailer's ride height, this ball mount will be appropriate for you. That'll complete today's test fit for the Curt Tri ball mount, part number C45001 on our 2014 Dodge Grand Caravan.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2014 Dodge Grand Caravan
Male: Today on our 2014 Dodge Grand Caravan we'll be test fitting the Convert-a-Ball Cushion Ball Mount for two inch hitches, with a one inch rise, or a two inch drop, rated at fourteen thousand pounds, part number AMSC2HD. Before we begin our test fit we'll first obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about thirteen and one quarters inches. Keep in mind this measurement may vary due to tire size, hitch style, or other after-market accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll secure it with a pin and clip. We'll then measure from the ground to the top of the ball platform, getting a measurement of about eleven and three quarters inches. Now, if your vehicle's hitch height matches ours, and your trailer's ride height matches this measurement, this would be an appropriate ball mount for you. We can now flip the ball mount over into the rise position, and, again, measure from the ground to the top of the ball platform.
What our customers are saying:
"very easy to shop"