# 1
Thule Hitching Post Pro Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches
The Thule Hitch has been very easy to use, but becomes loose after using it for a period of time. We tighten it as much a possible and it still manages to loosen. This makes us a bit nervous for a long trip.
I purchased this rack to carry our families' four bikes. There are two adult bikes and two kid bikes. It was very simple to put together and install on the vehicle! That's where the easiness stopped! It was nearly impossible for all four of our bikes to fit on this rack! It took me almost an hour the first time placing the bikes on the rack to figure out a way to position them so that they all would fit. Luckily, I manage to get them all on.. Not to mention, they rubbed each other and scratched the paint off of ne another. I think we need to purchase a 6-bike rack for our family of four..
# 2
Thule Passage 3 Bike Carrier - Trunk Mount
This rack was very easy to install on my Chevy traverse. Some people may be concerned about the spoiler being pulled apart, but if you follow the directions this should never happen. Make sure you adjust your dial to the correct number.
Thanks
# 3
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
This rack was very easy to install on my Chevy traverse. Some people may be concerned about the spoiler being pulled apart, but if you follow the directions this should never happen. Make sure you adjust your dial to the correct number.
Fits my 2015 Chevy traverse perfectly. Holds the bike great & very sturdy. So glad I found this rack & bought it here would definitely recommend it.
# 4
Curt Bike Rack for 5 Bikes - 2" Hitches - Tilting
It was obvious that we received a product that was returned by someone else when the box was overly taped shut, a support collar was broken, and most of the pieces were out of their ripped plastic bags. However, it was a great price to hold 5, 26" and/or 27" Trek bikes. I used a piece of the broken collar and went ahead and assembled the rack. Due to the weight of the 5 bikes it did not wobble that much when driving, as one of the bike tires was up against my car. I can only imagine that if we received an untampered product that this review would have been 5 stars. The picture is a little hard to see, but there are 5 Trek bikes on the rack on my 2020 Toyota Seinna.
We received a damaged box, damaged items, no instructions, the nuts and bolts are completely stripped and not inside a bag. This was obviously used, returned, not checked for quality and sent out. We are extremely upset.
# 5
Swagman XTC4 Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
Outstanding product and worth the money. Unpacked this, assembled easily, and loaded it up for 1000 mile roundtrip the next day on our 2013 Chevy Traverse. Very secure and stable - no noise or rattles - everything is snug - excellent quality. Locking hitch pin and locking cable included for great security. And kudos to Etrailer - I waited until the last minute - paid for 2 day shipping and got it in about 28 hours - great service! I will be ordering the 2 bike version for my son to replace the cheap noisy one that he has.
So far I’ve just assembled it and took a quick test drive around the block. My initial thought is this thing is perfect. It’s super sturdy and easy to use. My only gripe and it’s not fault of the rack, but it’s heavy…
# 6
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
This bike rack is exactly what I was looking for. It is heavy duty, but not too heavy to lift & carry when putting it on our vehicle or camper. I feel that our bikes are very safe and will get to where ever we are going, no matter the distance. Super easy to load and lock down and easy to fold down for getting things out of the Traverse. My wife likes it much better than our old "hanging" rack and can take the bikes off with ease. Great product!
This bike rack was easy to assemble with clear instructions. It holds the bicycles securely. I have a vehicle with a rear lift gate. Once the bicycle is removed, the rack can me repositioned to open the lift gate without having to remove the rack. This rack is easy to use, versatile, and well made. Great purchase. Would purchase it again if I needed another rack.
# 7
Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
With a few adjustments this rack has delivered. Needed to add additional strapping since the provide straps for securing the bikes to center bar were not long enough due to my ebike design (Velotric). My bikes are step through with a thick frame so provided straps won't fit. Simple adjustment with strapping resolved minor issue. Speed of 73 mph on the highway and some bumpy VT roads and this rack performed.
I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.
# 8
Malone Hanger Trunk Bike Rack for 3 Bikes - Adjustable Arms
The Malone rack adjusts to fit my 2017 Trax really snugly and securely. Once we learned how to configure the bikes for best fit, everything traveled without movement. The only downside is that this system seems designed for narrow road bikes rather than the mountain and hybrid bikes we own. Although the anti-sway cradles are sufficiently wide for mountain tires, the close proximity of the individual bike setups sometimes cause a strap to pull loose during travel, so we keep the bikes cabled to the rack frame. We are able to make it work. For narrower bikes, I would recommend this rack without reservation.
Works great! We keep it set up to one position because it's used on my car only. I'm glad we bought the lock feature because we can just leave the rack on at the trail site. This was a great purchase. I'm impressed that you follow up on your product. I recall your staff was quite helpful in making sure I purchased the correct item for my car and set it up correctly. No recent pictures of the carrier but I do have one of myself as "happy camper" on the Fox River Trail which was doable because of the carrier purchase!!
# 9
Yakima RidgeBack Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
The rack was very easy to install. Like anything you do for the first time, the next time would be much easier. Could do 5 or 6 in the time that the first install required. The bike lock was also an easy installation. The two make a nice unit.
Check out my other review on the hidden hitch for a 2015 BMW 4 Series for the majority of the review, but this thing is great. Easy setup and install, does all the things it's supposed to do. Mounting and removing bikes is a snap with the included clips (big difference from some of the cheaper variants with nylon ratchet straps). Fits very snugly in my 2" receiver, and pretty solid on the highway and over bumpy roads.
# 10
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gray
The Kuat rack was easy to assemble and has performed very well. The bikes were easy to load and unload and stable on rough roads. The rack looks good folded on the back of my Traverse and folded down allowed me to access golf clubs. I recommend this rack.
So after much research into bike racks, I decided on pulling the plug on the Kuat Sherpa 2.0. I've looked into the Kuat NV and other brands, but they were just too much for my needs. If you've got "regular" bikes and not the heavier eBikes, then this rack is perfect. I wanted a hitch rack that was user friendly and not overly complicated. I have a mixed bag of bikes and this rack can handle them all, from mountain bikes, street bikes, and BMX bikes. I like that this rack comes with an adapter piece for 20"-24" wheels. Assembly of the Kuat Sherpa 2.0 is really a no-brainer. I think it's only 4-5 bolts really. Everything else is ready to go. The anti-rattle hitch ball mechanism is simple to use with just a twist of the dial, easy. The tilt pedal/lever is also easy to access should you need to open your hatch, a solid "click" assures it's in place. So far, loving this rack. Fit and finish is superb. Thanks to Jerred and etrailer for answering my questions, always helpful.
# 11
Yakima RidgeBack Bike Rack for 5 Bikes - 1-1/4" and 2" Hitches - Tilting
The rack was very easy to install. Like anything you do for the first time, the next time would be much easier. Could do 5 or 6 in the time that the first install required. The bike lock was also an easy installation. The two make a nice unit.
Great product, easy to set up and take down. Looking forward to taking our whole family out for a ride. Only thing to be aware of is if your using kids bikes or mountain bikes, you may need to purchase the adapters.
# 12
Rola TX-104 4-Bike Rack for 2" Hitches - Tilting
I like this bike rack, I’ve used it a few times and it does the job it’s intended to do. Installing and removing is easy. I use it casually I take the family to the park or beach and we want to take our bikes out, the lock feature is a lifesaver. Would definitely recommend
Decent 4-bike rack for the price. Stable side-to-side with the screw-in hitch pin (2 inch receiver version). Gets some fore-aft rocking over bumps at speed (inherent to the tilting design). Bikes need bungee cords to keep them from swinging (typical for this style of rack). I used this with two bikes, and really struggle to see how four full-size bikes could be added. Maybe if seats were removed? I added bumpers and some padding for the vertical post, and will probably relocate the retainer pin lanyard so the rack can be completely collapsed for storage. A few design improvements for 5 star rating would be: 1 - Add some bumpers for the fully lowered position, 2 -Add some padding on the vertical post for bike contact or accidental vehicle hatch lifting when in the raised position, 3 - Mount the retainer pin lanyard to one of the through-bolts or move the lanyard hole - collapsing this rack chews up the retaining lanyard. etrailer.com service was great - well packaged, and quickly shipped!
# 13
Yakima RidgeBack Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
The rack was very easy to install. Like anything you do for the first time, the next time would be much easier. Could do 5 or 6 in the time that the first install required. The bike lock was also an easy installation. The two make a nice unit.
This two bike rack has been great for the occasional bike ride outside of our home area. I like the sturdy construction, but beware that it is a little heavier than it looks (I’m retired and a bit older so maybe not as strong). Easy to fit into the factory trailer hitch on our 5 passenger SUV and no problem securing the bikes for transport. My only complaint is, the stick on Yakima Graphic started coming apart the day we got it. Sorry, no free advertising for Yakima.
SportRack Hitch Bike Racks Review - 2014 Chevrolet Traverse
Today on our 2014 Chevrolet Traverse we are going to be doing a test fit of the SportRack Ridge 5. This is going to be your hanging style 5 bike rack. It does come with an 1-1/4" shank, as well as a 2" adapter. Just keep in mind with a Class 1 and 2 hitch and your 1-1/4 shank, that you will only be able to carry three (3) bikes maximum. This is going to be part number SR2405. We are going to see how it looks and fits on this Traverse that we have here today. Insert your shank into your receiver and line up your pin holes.
Swagman Hitch Bike Racks Review - 2014 Chevrolet Traverse
Today on our 2014 Chevrolet Traverse we're going to be doing a test fit of the Swagman Trailhead 4. This is going to be your hanging-style 4-bike rack. It comes with an 1-1/4" shank and a 2" adapter. Just remember with your 1-1/4" shank class one and two hitches, that you will only be able to carry three bikes per the capacity, but you can carry all the bikes on this with your 2". It's going to be part number S63380. First step, we're going to insert our shank into our receiver and line up the holes. Once you have your pinholes lined up, go ahead and insert your anti-rattle bolt and thread it in as far as you can by hand.
Yakima FrontLoader Roof Bike Rack Review - 2014 Chevrolet Traverse
Speaker: Today on our 2014 Chevy Traverse we're going to be test-fitting the Yakima Frontloader roof-mounted bike rack, part number Y02103. We'll begin our test-fit by placing the rack on top of our vehicle. We'll go ahead and do that now. I'm going to go ahead and open the doors on the vehicle just so I'm able to stand in them have a little bit more reach. For the front bar, as you can see there's the hook here on the front which runs all the way across the front of it and then a single hook at the back. What we're going to do is we're going to position to where we're going to close down the knob here on the front and that's going to bring that back jaw down on the bar. As we tighten it down on there it's going to bring both the two clamps of the jaw, or jaws of the clamp, excuse me, together. Nice thing of this rack with it having the style of fastening mechanism, you're able to put it on several different types of bars. If you have this style bar on one vehicle and then another style on a different vehicle, you can transfer it from vehicle to vehicle. With that tightened down we'll go ahead and go to our back bar and secure it back there.
Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Chevrolet Traverse
Today on our 2014 Chevy Traverse, we're going to be test fitting the Yakima ForkLift roof-mounted Bike Rack part #Y02098. To begin our test-fit we're going to go ahead and place the rack on top of the vehicle. I'm going to open the doors here and that way I can stand in the doorway just for a little bit more height. So with our rack in position, the first thing that we're going to do is there's a T-bolt that goes in here. When it's in this position it will be stuck. If we place it in this position we can actually open this up.
What our customers are saying:
"Everyone that bought before me was right! I got my rack in time for my next days off and putting it together was fast too. And I'm a grandma!! Thank you for being fast and honest! You beat anyone in my town hands down!"