Most Popular Tail Light Mount for 2013 Jeep Wrangler

Haven't installed it yet but according to YouTube it is very easy. Very fast delivery! Thanks

Lori was spot on in making sure I got the correct base plate assembly and light package for my 2015 Jeep Wrangler Sport. Deliver was within the projected timeframe and installation when as per detailed instructions . Good job Team ETrailer, that is why I keep coming back

Used with my 2002 Jeep Wrangler. Works well.

I was looking for a wiring harness to tow my 2000 Jeep Wrangler. I watched a YouTube vidio sponsored by you guys. The video recommended the Hopkins wiring harness. I ordered it, it came with in 3 days as promised and was extremely simple to install!!! Love a company that that delivers what it advertises!!! Thanks again!!! Don Pommerville Pommerville Automotive

Thank you my order came on time and looks great , like always you guys are assume.

I bought the Roadmaster Tail Light Wiring Kit with Bulbs RM-155 to install on my 2013 Jeep Wrangler Unlimited for towing behind our motorhome. I watched the install video before it arrived. With the help of my friend Steve we had it installed and working in about 2 hours. The install was easy. Routing the wiring took the largest amount of time. Cutting out the bulb holes in the tail light assembly was a bit scary but it was easy just like in video. Thanks Etrailer for great service and really helpful how to videos. Chuck B.

Perfect product for my needs. Going to be fun just installing it! Great product and GREAT SERVICE from etrailer.com. Thanks again!

installed your isolating diode wiring harness 38955 also the blue ox base plate bx1126 . install was very easy with video on your site.was installed on my 2007 wangler to be towed with holiday rambler motor home.

Click to Enlarge

Click to Enlarge

This Is the basic toad wiring kit that will allow you to use the toad's taillights in conjunction with your motorhome. It comes with a "Four Flat" plug but can cut and attatched to any plug you need. Complexity of installation depends on your toad. My Jeep Wrangler was easy to wire. My Subaru Impreza was far more difficult do to its design.

The Blue Ox system is top of the line and simple to install. It arrived quickly and will be installed on Thursday. The RV is still about two weeks out, so we can't field test it just yet, but are excited about the prospect of having my jeep as a dinghy for excursions.

Plenty of wire to run from front to back on a 1993 Jeep yj Be prepared to drill holes thru the backside of the housing to run the wires thru.

Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!

Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered. tow bar Plate is more than substantial and the Tow bar is amazing.

This is a great way to be able to tow your vehicle without happen to have the key in the on position to have my lights work. This is on a Jeep 2001 Jeep wrangler. I also disabled the steering wheel lock. Now the keys are with me and not left in the ignition so it can be stolen.

This is a really neat product and works great. What more can I say.

This kit did the job very well. I could have bought each part separately and saved some money, but I went with the comfort knowing all these parts will work together to accomplish the job. I couldn't figure what LED bulb to use for both brake and turn signal. I routed the wire along the truck wiring harness for half the way to the front, then slipped it into the frame channel for the rest of the way. I used a Curt heavy, round 4 pin plug at the front grill. It was a bit of work and took many hours but came out clean!

It was an easy install on our Jeep Wrangler. Works great.

Easy to install, make sure you have cable ties the kit dose not come with any

The tail light kit was easy to install, but I had to replace one of the lights within three months. The lights don't appear to be very durable. I purchased a different LED bulb as a replacement and it appears to be working good now.

Your products have been perfect, good fits and quality products. The towing base plate for my ford Fiesta fit with little modification and the ability to use standard tools. The instructions were right on. The tail light wiring kit also was easy and works great. Shipping was fast and delivery arrived as indicated. I will continue to do business with you.

Product worked great on 2020 Jeep Wrangler. Installation video was helpful. No issues. Very straight forward

This kit was fairly easy to install on a 2021 Jeep Wrangler. If you use this kit to set up a Roadmaster Nighthawk tow bar you do not need the 7-wire to 6-wire coil connector as the tow bar comes with it. Get a 4 diode wire kit without the coil connector and save money.

The labels for the Right Taillight Running Light splice were labeled Backwards, to module and to vehicle were reversed which wasted 30 minutes of time. Beware! etrailer may want to get this right with the vendor or risk a bunch of needless returns.

I have bought off of you before everything was great this is the first time that I received something that was not what it was supposed to be or was used before the papers on the installation were all wrinkled and dirty and had writing on the ends of the wire were all cut and the connectors were not on I called your company and they made it right and gave me back my money except for my shipping and they told me just to keep it it's no good to me but thank you and I am still buying off of you

Worked perfect for setting my 2001 Jeep Wrangler up for flat towing behind my Motorhome. The instructions were clearly written, the diode was clearly marked and all the connectors were there to make this wiring job simple.

Haven't installed yet but service was excellent

Great wiring kit. Everything fit and worked perfectly on my 2013 F-150

Big job, completed in 4 hours by myself. Not bad for a person 81 years old. Once again great instructions.

DOES not fit inside of the plug is too big, so much for plug and play.

Helpful staff fast delivery

Installed in my 2024 Chevy Trax. I ran the wire harness up through the front fender, and along the DS rocker panel. No drilling into body required. However, I purchased extra loom to better protect exposed wires next to body. Additionally, I purchased extra wire to support the DS to PS taillight connections. Finally, be advised the plastic taillight assemply is "double hulled," so once you bore through the exterior of the assembly, you will need to drill again, into the lense. On this point, and to ensure a good fit of the bulb socket, a Dremel tool was used to grind down the plastic surface, to ensure a good flat and tight fit. Finally, I used the first cut-out to fashion a cap and to seal the light socket installation. See pic.

Click to Enlarge