Best 2011 Jeep Liberty Trailer Hitch Ball Mounts

Super fast processing and shipping. Item was delivered less than 48 hours after placing order. Worked perfectly for providing needed clearance between trailer and spare tire on back of Jeep Liberty.

Just what was needed to allow trailer to be attached to Jeep Liberty that has spare tire on rear door.

Great product and great company!

Purchased hitch ball, ball mount, hitch extender, wiring extension, safety chain extension, and storage bags for a Jeep Liberty. ETrailer has a great selection of products, with good prices, and fast shipping. We will definitely buy from them again. We have not had an opportunity to use the items purchased, but anticipate no problems.

Haven't installed yet, but the item arrived on time without any problems.

Fits hitch and excited about putting it to use.

Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.

this was the exact product that i needed for my 2005 jeep liberty. it places the ball clear of the spare tire and is of great quality.

Great quality

This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.

Perfect size for a 2004 Jeep Liberty with spare wheel on back. Very nice quality. I can now mount my trailer hassle free.

BM20 Long Drawbar. Perfect for my 2005 Jeep Liberty. I no longer have to remove the spare to tow. Solved what was a major pain!

The product is good but a bit tideous and after installing it my bracket fell and it was a pain to get replace it support made me buy the replacement pieces and the bracket didnt come with just the bolts, and at the end they told i have i had to buy the whole unit because based on their system my truck didnt have issues with installement and the manufacturer didnt supply that bracket cause it special order so in general i dont recommend in my choice better to get it welded.

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

This is exactly what I needed for my front end mounted receiver.

As advertised and quick delivery, I am an Etrailer fan!

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

This has been an amazing multipurpose ball mount. We purchased this to use with our Hollywood Bike Rack and also to connect onto our boat. We weren't sure if this would work, but it was awesome. It is very well built and We had to make some minor adjustments to the position of our boat on the trailer so the turning radius of the bike rack that was attached would clear the truck. This is very well made and solid.

Went in just like it was supposed to. Quick shipping as always.

The hitch works great. The service was excellent!!! I'm going back and having a hitch put on my other car soon. Thank you.

For a 7,500 lb hitch, I was surprised it didn’t have a wedge support welded on where the flat iron is welded to the square tube.

Just what I needed, most receivers would not allow me to open the tail gate on my 2022 dodge ram without hitting the trailers crank used to mount and dismount the car hauler trailer, this receiver give me the extra few inches I needed and it works perfectly, I tried many local sources but they all came up too short, etrailer is the place to go for all trailer parts, they seem to know and sell exactly what you may need

Very good product and I would have given it a 5 star rating but there is one critical flaw that is quickly remedied. When using the pintle hitch, the pressure exerted on pin while pulling a load can cause the pin to turn, thereby popping out the keeper pin. This happened twice and it was a good thing that I had the hitch positioned so that the pintle pin was installed going down allowing gravity to hold the pin in place even when the keeper pin fell out. I have since changed out this style of keeper pin with a cinch pin that can spin 360 degrees inside the 2" tube and no pressure is exerted on it by the load being pulled. If I were designing this from new, I would make it so that the draw pin on the pintle had a square shoulder much like a carriage bolt so that it can't turn thereby eliminating pressure on the keeper pin. Other than that it is a great product.

The cotter pin was bent. It didn’t seem to be fitting good so I tried to straighten it which broke the tip off, rendering it useless. Looking back at the pictures on your website for the product it is apparently supposed to be bent to help it fit better in the confined space. Oh well, live and learn...

Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.

I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.

Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.

Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!

The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.

This slightly longer than average bar was perfect for my application. The drop length was perfect also for the application. As usual, eTrailer's site and retail experience was first rate. Lots of info and specs (and videos) available makes it easier to get that piece of mind knowing that what you needed was what you ordered.

First impression massive, heavy Built Stout. My truck is always hooked to a trailer so I figured I would try a nicer set up I was using the B&W which is great for the average Joe that just needs to pull a trailer every now and then but this is a whole new world first trailer I pulled with It I could feel the difference right away it was smoother the vibrations and harsh thump feelings that I would normally get when pulling the trailers when I hit rough roads or bumps was not as bad or gone. It definitely made a huge difference super easy to move height if needed and an added bonus I didn’t think of is that it pushes the trailer back further so you can get a little tighter turning when backing up if needed and i can open the tailgate and it won’t hit the jack on the trailer. On top of that when people see it it’s a conversation starter There are not many of these out there so they are intrigued by the size and how it works. Bottom line in my opinion if you’re towing all the time it is worth the investment. I would invest in another.

Built like a brick s@%thouse. Works great! Keep in mind I use this for pulling same trailer loaded same way every day. I could figure out optimal hitch weight and keep it there

Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.

definitely solid as a rock

Just received the product and installed it (7/10). Ordered June 28th and it was in stock. Called Theresa -who was wonderful - and George T. said item was to be here July 6. The products are fine, the service was fine, but the delivery times changed 3 times.But, I would still recommend E-Trailer and the product.

This hitch is a beast. Rated at 10,000 lbs and made from solid bar stock. The box it came in was very damaged but the hitch was totally fine - after all, what is there to hurt (besides whatever it hit!) Good prices, good communication, quick service, perfect transaction. etrailer for the win.

We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.

A year has passed with my Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount and I have nothing but praise for this mount. Once you find the correct height to have a perfectly level trailer there's no need to adjust. The beauty lies in the cushioning! Towing a Yamaha AR190 (3200lb boat and trailer combo) is silent. Even over the bumpiest pavement the tow is smooth. There is no harsh slamming when braking or taking off from the boat ramp. I don't know why everyone isn't running one of these, I wouldn't run any other hitch mount PERIOD! If you're on the fence, get off and buy one, you will NOT regret it!

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

Nothing comes close to this trailer hitch mount! Well designed and needed especially if you tow different things. versatility and sleek appearance in stow mode. The only reason I did not give it 5 stars is simply because sometimes the 3 rods you have to remove and reinsert sometimes get stuck and you have to bang it a bit to get one or more loosened so you can remove or reinsert. Maybe graphite spray?