# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Pretty straight forward, Got what I ordered in a timely manner and was the correct part.
Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.
The hitch was delivered on time as scheduled. It looks great and will fit the van perfectly. I will provide a follow up post once it's installed and functional. This is my 5th hitch from etrailer and i wouldn't buy from anyone else. Thanks etrailer!
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.
Pretty straight forward, Got what I ordered in a timely manner and was the correct part.
# 4
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
I have had absolutely no issues with this product, or for that matter, any of the products I have purchased from etrailer... wish they made more of the products I use. love the Youtube instructional videos too. Thanks for selling a great product and having great customer service
The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Excellent 2" ball mount. I have one of these for every vehicle that I use for towing.
Feels great in hand, but I won't be using it. For my 2006 Odyssey I need a 4" lift so my brother has already claimed it. Made in the USA.
# 6
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
I have never regretted ordering through etrailer. As always, this order arrived precisely on-time. The wiring for trailer lights proceeded exactly as expected. The online video describing the installation was very helpful with no surprises encountered while following the instruction. Don't forget to order a hitch pin. Surprisingly, it wasn't included with the drawbar.
The bar was exactly as I expected, but there were two deep dings that penetrated the paint and actually deformed the underlying metal. Disappointing as this is, knowing that it will probably develop rust prematurely while in use, I decided to not go through the hassle of requesting a replacement unit.
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Very please with the purchase. Solid construction and raised the overall height of the receiver hitch on my Honda Odyssey with added ground clearance. Excellent service/shipping from eTrailer as usual.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 8
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 9
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
# 10
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
Strong and works perfectly!
Great product, Fast shipping, Good Price
# 11
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Works as intended, pretty rock solid. Note on here said to only use it in the RISE position, not the drop position.
I wanted to attach a small luggage carrier behind my odyssey. I had to grill another mounting hole to alter the angle so it would not drag. Excellent product. Was able to customize it easily. Thank you.
# 12
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you
Works great. Needed the drop to tow a utility trailer at level.
# 13
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
Excellent information from the catalog which got me exactly what I needed. All parts arrived in perfect condition. Delivery was fast. I needed additional height for my boat connecting to a 2011 Honda Odyssey so I used this part up-side-down. In this configuration it matches the hitch height on my truck.
Pretty straight forward, Got what I ordered in a timely manner and was the correct part.
# 14
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
I was not sure that the 8-3/4" rise was going to be enough, I followed your instructions on how to measure the rise needed and it was the perfect height. Thank you
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 16
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
Seems to be high quality.
# 17
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
Fits snug with the built-in tapers. Seems sturdy. Hopefully will last a long time.
Nice solid (not hollow) and WELDED hitch. Have logged about 5,000 miles this year with no problems. I had many problems with bolted on balls, welded hitches are the way to go.
# 18
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
This was part of the entire "Hitch System" I ordered for eTrailer. Everything fit together without any problems. Feel to this particular part is heavy and well over-designed to ensure performance and safety. Very confident that it will last long after the vehicle it is connected to is gone.
This long-shaft ball mount enabled me to fully insert and pin the shaft and get the rise I needed for towing level a Yakima Trailer by a 2015 Honda Odyssey. The typical, shorter shaft was not long enough for complete insertion and pinning of the shaft because the welded on arm-support piece hit the bumper.
# 19
Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Rise - 5,000 lbs
Fits snug with the built-in tapers. Seems sturdy. Hopefully will last a long time.
Exactly what i ordered and it came fairly quickly! Im very happy worh everything!
# 20
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Very convenient kit. Nice to have the locking pin and receiver cover. I reversed to the 2" rise position since my 2016 Honda Odyssey already sits low to the ground.
Seems to be high quality.
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting the Convertible Cushion ball mount, part number AMSC4. Before we fit our ball mount we want to take one important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model, or other aftermarket parts. On our particular Odyssey, with this particular hitch, we have a hitch height measurement of 12 inches. Now well go ahead and mount our ball mount in the drop position.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting the Convertible Cushion ball mount, part number AMSC2. Before we fit our ball mount we want to take one important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model, or other aftermarket parts. On our particular Odyssey, with this particular hitch, we have a hitch height measurement of 12 inches. Now well go ahead and mount our ball mount in the drop position.
Draw-Tite Ball Mount Review - 2011 Honda Odyssey
Today on our 2011 Honda Odyssey well be test fitting the Draw-Tite Ball Mount part number 2923. Before we fit our ball mount we want to take one important measurement on the vehicle. We want to measure the hitch height and thats the measurement from the ground to the inside top edge of our receiver tube. Now remember this measurement will vary from vehicle to vehicle depending on tire size, exact model or other aftermarket parts. On our particular Odyssey with this particular hitch we have a hitch height measurement of 12 inches. Now well go ahead and mount the ball mount in the drop position.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"