Best 2010 Jayco Jay Flight Travel Trailer Camper Jacks

Great product, perfect fit. Works very good. Friendly help on website. Fast shipping. Thank You,

My Jack arrived DOA. After installing it on my trailer, the Jack didn’t work. The manual crank handle came in handy because I didn’t have time to troubleshoot and repair it at the time. It was just a wire that was no longer connected to the switch but I have to tell you it was extremely disappointing to receive a brand new item that didn’t work. If it had worked out of the box, I’d give it a five star review. You should consider soldering and heat shrinking the wires to the switches or making the wires longer so they aren’t banjo string tight and putting the lug at a strange angle.

The screw on one Jack is damaged and is in unusable. Would like a replacement. Photo attached.

Definitely a heavier duty version of our campers stock stabilizers. They bolted right up to the brackets and glad we have new stabilizers. I hope the paint lasts on these as that seems to be an issue with the other, cheaper stabilizers. Time will tell.

Web site easy to use. Trailer jack came in quick. I like not having to wonder if my online order is going to ship or get delivered. Every time i order from this company i get an email they received my order. I get an email that it shipped. I get an email that it was Delivered. Now days its common to place an online order and you take a chance of not knowing if you going to get anything. I recommend this company.

Item arrived a day earlier & in good condition! & was a very easy install ,& is a upgrade from manual one that broke at the handle ,& this is a upgrade for my 2008 22'Airstream Safari! Can't wait for my next outing, Also I like that it comes with a backup manual hand crank in case you need it,& that it was a exact fit for my travel trailer,It's a complete package that needs nothing else.

Great price and service, They shipped one half of jack system and after phone and picture of part I received, they found second have and shipped out the next day. Installed easy, but had to call manufacture to figure out the wiring, manufacture was very helpful also. It been on for a year with lots of use.

Finally got around to installing my PT II Stabilizers 30" front and rear of our 26' Surveyor. Pre - assembled them to make sure they went together ok. Luckily I had two sources for power front & rear which made wiring easy, I used a Buss block to make all positive connections, grounds straight to frame, soldered all connections and heat srinked to seal. Using the 3/8" self tappers was fun.Well got it all together and all works well makes trailer very stable, don't have to worry about scissor jacks collapsing anymore.

There's not a lot to say. The first Stabilizer carton was damaged to the point the carrier couldn't even find the Stabilizer. etrailer.com was very cooperative & sent a second unit out right away. Although the second shipment packaging was damaged all parts were there and undamaged. I installed the unit and it is so so much better, quieter and faster than the old unit. I highly recommend both Lippert and etrailer.com

The shipping of this part was terrible at best! They packaged the stabilizer in a cheap cardboard box and of course it arrived trashed! And of course it arrived almost a week later than they said it would. The rubber cover for the motor is torn, the main metal beam is dented. This is absolute crap on your part etrailer.

Worked until I traded in the trailer.

Perfect!

This product is awesome and has made a substantial difference in the stability of our camper! We have a 32' travel trailer and the factory jacks are sad and could feel every movement of the kids. This has taken away 90% of the movement that we were having before. If you are not handy plan on having someone install this for you. It's not hard to do but if you don't have some tools for the job you will struggle. It took about 4 hours total to install.

Very happy with the quality of this stabilizer jack!! I currently only have the jack installed on one end of our toy hauler and you can feel the difference in how stable the camper is on one end compared to the other end that still has the scissor type jacks. I will definitely be purchasing a second one!!

Very nice leveling system. Had a damaged tongue jack that etrailer in only one day had a replacement shipped. Excellent customer service is much appreciated. Thank you.

I love these jacks I would recommend to anyone who has the time and know how to install these. I installed these on a Minnie plus 31BHDS 35.5 foot travel trailer. It’s hasn’t let me down yet leveling the trailer every time. Even so much that it will lift the tires off the ground on one side to achieve it. Even with the wheels off the ground all doors and cabenits work perfect. The install was tough for one person took me three full days. The way my camper was set up I couldn’t follow there instructions exactly on the placent distances of the jacks but I was within a foot and it works. It has a touch screen for in the camper which after initial set up I haven’t needed to use it. The other control i installed on the exterior front driver side and that’s the one I use every time. It’s so easy now I press 1 button and its level every time. This really makes setting up much faster and less stress I don’t have to yell back and forth with my wife which she hates finding level. Great product so far.

The CargoBuckle G3 ratchet tie-down straps and 45 degree mounting brackets worked great. Makes loading and unloading a breeze.

I love my new electric trailer jack ! It has a 7 pin RV plug which makes it so convenient to power. There are lights on both sides to shine onto the hitch after dark. There is a bubble level on top to know when the camper is at least level enough to start setting up. It all works great !

Very nice works really good. Bolts rite up

leveling jack was delivered very promptly and in good shape. installed on my 5th wheel easily and works fine. a bit lighter duty than the OEM jack but darn good value for the price and will get the job done. etrailer is the best!

Before I purchased the Strong Arm my travel trailer would shake considerably when someone would move around the trailer. Since installing the Strong Arm system (which was quite easy to do) movement about the trailer is no longer an irritating issue.

Strongman’s were pretty straight forward to install. Packaging did not come with T handles so I called the great folks at etrailer and new handles were shipped out no questions asked and arrived in 3 days.

Do not like the new design. Much slower than the old version and the buttons stick out too far and now I cannot lower my tailgate while the trailer is attached.

This is what I needed. I Wanted a little more lbs. of lift so I could lift my truck for weight bars and such. I have a 2014 Rockwood A Fram and needed the mounting holes to line up. After some research, I found Stromberg jet-3755 worked perfectly. I have used it for a year now and no problems. Easy to set up and use. Thank you etrailer

The up/down switch must have been installed upside down. “Up” is actually down, and vise versa.

Bulldog BD500199 installed on 2006 Jayco Jayflight 27BH. Bought this powered jack to replace the non-functioning electric jack that came with the camper we bought 6mo ago. We’ve been using the manual override on the old one, so having a working jack is going to be great:) Just installed this new unit yesterday, so have only used at home so far, but it seems to work very well. Speed is good. It has the drop leg with spring pin for quick adjustment which is cool. It has a built in light which is fairly bright and should come in handy for setting up at night. Installation was very easy. Literally had the old jack removed and new one in place in about 20mins and that included getting the jack stands set up. The hole in the A-frame was big enough for the larger diameter tube of the Bulldog unit, so no fitment problems. I’ve got photos showing the old unit and new. Forgot to take one with the jack removed. There was additional time wiring, but it was only another 20mins or so. Most of that time was spent deciding on routing and zip tying the wire. There is only one wire that hooks up to the battery positive post and there is an internal breaker in the unit so you don’t wire in an external fuse. Heads up there are no wire terminals in the kit, so you will need to have your own to crimp onto the wire. You’ll need a 10ga connector, likely a 5/16 or 3/8 ring terminal but could vary depending on your battery. The wire lead could have been another 12” longer, but it was just barely long enough to reach the positive post after I flipped the battery around to put the positive post on that side of the frame. Also should note that this unit has a dual mounting pattern that allows for turning the head unit 90deg to face sideways, which is what I ended up doing. Facing forward, the head of the jack was really tight up against the propane bottles/cover, so turning it sideways fit much better with our camper. Looks to be well built, so hoping it lasts a long time, and I’m looking forward to not using a manual override crank next time we go camping!

Product arrived in the Bull Dog box. It was torn up pretty bad but product was not damaged or missing parts. More protective packaging would have helped. Other than that, its a 5.

These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.

we are using these stabilizers for supporting our offloaded truck camper (adventurer 910db) where we reside full-time ... they are very easy to use, provide excellent support for the truck camper and have eliminated 98% of wobble ... the support structure includes jack pads, e-trailer stabilizer, 2x6 pressure treated lumber, 4x8 3/4 inch pressure treated plywood

This was my second order with etrailer and I have been pleased with the service. Items are shipped quickly and order was accurate each time. The products are high quality and work as described.

We replaced four badly worn 2500 lb jacks with these heavier 5000 lb jacks and are very happy with the quality of these new jacks. They arrived quickly and were a perfect fit. The construction is superior to the jacks we replaced. Your instructional videos were very helpful. Thanks for your excellent service.

Ordered a power stabilizer jack for my 2012 Jayco fifth wheel in 2023 , easy to install the item myself , stabilizer working great , will buy future items at this site , thanks

The stabilizer works well. I would buy it again

Jayco camper came with stabilizing jacks in the rear but none in the front. After wife complained that my walking around in the camper in the morning made the bed feel like a water bed I installed these jacks. They work perfect, easy and fast to deploy and camper is now solid when parked.

The jack works great. I didn’t have any problems with the installation. My only issue is that the holes are 90° off for my Fastway jack foot which goes up automatically. I’m debating whether to leave the jack 90° off or drill new holes in the jack.

This is awesome and so easy to install. Took longer to open the box then to set it up. We had ordered something similar to this for our old camper. It took us hours to get it to fit right. This was extremely easy to install. My husband loves the memory feature on this thing.

Hello, Please see pics below of broken weld on jack. The jack was just installed and in use for about 7 days and noted the broken weld. Jack functions as described, however, we question the durability of the jack.

Definitely has the power I need however I can't open my tailgate when my camper is hooked up. 5 stars for power.