Best 2010 Audi Q7 Trailer Hitch Ball Mounts

Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.

I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY

I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.

The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.

This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.

I actually got my hitch the date they said it would be here to my surprise. When the box arrived it was pretty much beat up, not the hitch just the box. I wished there was instructions how to install it. Overall very satisfied and will buy from 5hem again

Excellent hitch easy installation.It only took me about an hr and half to install from start to finish

Very happy with hitch and components, came in a nice tray that I use to store and organize the parts when not in use in the back compartment of my Telluride. All good.

First of all, the products you find at etrailer are not your garden variety, home depot kind of fair. Much higher quality and grade/weight ratings. So to be able to get hard to find items and then by orderring at least 100$ worth of stuff also get it delivered free in 4 days, is awesome. The prices are incredible too.

My 2018 F350 chassis cab has a Knapheide service body with a Buyers hitch installed by Knapheide. It is bolted and welded in place. Unfortunately, it only has a 2" receiver. To have them change to the 2.5" receiver hitch would cost me approximately $1200. The 20,000 lb. Curt replacement hitch would not work on this truck with this bed. The Buyer's hitch has a weight rating of 16,000 lbs. and 1600 lb. tongue weight. Fortunately, Curt has come through again for me with this ball mount. I bought two: one for my 2" ball and one for my 2-5/16" ball. They are great and the drop is very close to what would be perfect. Your towing set-up is only as strong as your weakest link and I now know the the ball mount is definitely not my weakest link. One note to Curt: When you put the stickers on your ball mounts, make sure they're clean. Before I even towed, the thick Curt sticker on both ball mounts started coming off. It feels like there is some kind of coating possibly on the mount and then the decals were applied. I tried pressing them both back on but I doubt they'll last the rest of the week. But as always, Curt has built me a great product for my needs. I'm a one man landscaper business but have spent quite a bit on Curt hitch products because they WORK.

I move lots of small and medium sized trailers and I never know what it will be when I arrive at the job. Pull the cross pin and rotate the ball to 2" or 1-7/8" without having move the vehicle. This really is a great piece of kit!

Great product, but even better customer service! 5 Stars. My order was shipped within hours after being placed late evening. And, 2-day arrivalal to Sacramento. Awesome work, Guys. Thank You!!

It’s a great product and performed as I needed it. I need the two inch ball and the 2 1/4 in ball scraped the street as I was backing out. There should be a way to take the ball you don’t use off!

Nice looking and very well made. I will be hauling a 24’ enclosed trailer with combine weight of 6000 pounds. I am replacing a one piece steel unit that was showing signs of bending. This should be safer.

Great hitch’s. Very heavy duty and e trailer is wonderful to work with. Ordered wrong size no problem with return replacement sent out the next day. I should’ve read the sizes. Lol

This is one solid hitch. Bought the hitch to pull about 5000 lbs. there's no doubt in my mind that it can handle it.

I like the look of this set very much and it is easy to mount and adjust the ball mount. The workmanship and finish are beautiful. Customer service was excellent in assuring I found the correct mount for my Ford Escape. I pull my 6'x10' utility trailer or very seldom my pontoon trailer. I like that the adjustable mount comes off very easily as I remove it until I need it while my vehicle is in the garage--it helps prevent knocking your leg against it in the garage. However, I am not having any luck loosening the bolt that secures the 2 chrome balls to the adjustable ball mount; I have the correct Allen wrench but cannot exert sufficient torque to loosen the bolt while the adjustable ball holder is off the ball mount. I want to put a different ball combination on so I can pull my son's trailer, which has a smaller ball than comes with the set, if I have to. I also added the anti-rattle device and it stops the mount completely.

Solid product that I look forward to using. It's appearance in the bright polished aluminum almost makes it too beautiful to use! The adjustable height settings will surely meet the requirement for any trailer that I'll ever haul. With a 39.25" upper wheel well from the ground measurement, the adjustable ball mount gives me a 16-to-21in measurement from the ground to the top of ball.

Good product and super service. One note. These have 1 1/4” holes and not 1”. I missed that when I ordered. So if you’re using hitch pins make note of that.

I use these on 7 trucks that tow trailers 32,000 + miles per year. If you want to feel safe with a ball carrier that will stand the test this is the way to go. I have been using these for several years with no issues and will continue to purchase them. They are heavy but they are durable.

The 5” B&W has worked great for me. This year I’ve towed an 18 foot speed boat, a 21 foot family boat, and a travel trailer. Used 3 different heights on hitch to accommodate each trailer, including the larger ball for the travel trailer. When all done, I use the stow feature too. No more hitting shins on the hitch! Quality unit, very happy with its versatility and solid craftsmanship.

Great heavy dury hitch for towing. Less noise than other hitches and does a great job pulling my boat. Love the easy adjusting to height based on terrain where you may need to change this. Worth every dollar and likely a hitch for life.

I have a truck with a class 5 hitch. Using the 2" to 2 1/2" adapter had a lot of play in it and this ball mount removed that play. The truck and me won't bounce around so much. Thanks for the great deal and fast shipping. Will be shopping with you again. Thanks again.

Over the last couple of years, I have purchased different parts for my towing needs from etrailer.com. The parts have ranged from hitch adapters to trailer tires. The customer service from Crystal K., and the quality of the products from etrailer.com have all been the very best that you could expect. I highly recommend that you at least consider etrailer.com for anything that you may need when you are towing or RV'ing.

Solid piece made in USA. Haven’t towed with it yet. Great phone service. Quick shipping. Impressed by how well the drop hitch arrived, many times small dense items don’t fair well in transit. Due to double box plus great heavy box and extra attachments to the box this arrived great. Clearly etrailer has this down.

Looks like it is a heavy duty one. Will work good on my truck.

Very happy with this ball mount - provides just the amount of drop we required for a level tow of our GeoPro travel trailer by our RAM2500. Plus, the extra length not only allows a tighter turning radius, but also allows us to lower the truck tailgate without having to detach the trailer. Huge improvement on all accounts for us compared to our prior setup. The product is well built and I'm confident will provide us years of good use.

Great customer service. Live in SC - ordered a hitch and USPS delivered it to PUERTO RICO. Go figure. Stacey A refunded my money - but 2 weeks later hitch appeared on my doorstep. All’s well that ends well.

My newer Chevy K3500 has a 2 1/2 inch square receiver so I was able too get rid of my 2" ball mount that was almost too heavy to lift and replace it with a new Reese tri- ball mount with a 14,000 lb Gross towing capacity and weighs less than 12 pounds. Thanks to Cathy H. and Chris W. at etrailer.com for finding the right equipment for my needs.

Despite some of the conflicting reports on here about the Reese Tri-ball Titan Hitch fitting 2011 and up Super Dutys I took a gamble and it payed off. It fits my 2012 Super Duty with no issue. I didn't have to grind the corners or take the sticker off or remove any paint. Thanks for the great customer service and answering my questions.

Very sturdy. Handel's 2/516 ball with 1.25 inch shank well 12k

All of the positive reviews I read before the purchase were spot on. Excellent product that has performed flawlessly. The staff at etrailer are on top of their game also. I highly recommend this product and buying from etrailer.

Great purchase experience. eTrailer has this convenient package of ball and hitch already torqued together, AND includes a locking pin in addition to the normal cotter pin! Website is clear on details of package, contents, and dimensions of each component. Shipping was fast and packaged well. I’m not sure if I saved money compared to buying all this separately, but I’m going to believe I did. Thanks!

dodge journey 2014 etrailer service excellent the hitch don't fit perfect with the spare tire other ways is pretty good if you tele out the spare tire you going to have a hard time to put them back etrailer sevicio es excelente la pieza no se acopla perfecto con la rueda de repuesto del resto se monta perfecto . si se retira la rueda de repuesto es muy dificil de poner de vuelta en el compartimento

After one year I'd love hitch. Exactly what I needed some pool might load level. Very strong in the powder coating is actually holding up for a change.

Received the Class II Drawbar 5-1/2" Rise or 6" Drop - BM96 in a timely manner. The rise was what I was looking for to use with my Polaris ATV 570 since its standard receiver is 1-1\4 hitch and sits low to the ground. This was just the right height to pull my john boat behind the ATV.

Everything, when I need something for my truck I always turn to etrailer. They make it so easy to get the product you are looking for. The quality of their product and the Customer service are the BEST! Thank you.

Great solid forged Ball mount!

Needed a longer unit to accept a bike carrier.

Just what I ordered.