Best 2008 Chevrolet Silverado Gooseneck And Fifth Wheel Adapters

B&W Companion. American made product! Very high quality. What a peace of mind knowing what my 5th wheel trailer is connected to.

Quick delivery, I've used several different types of fifth wheel hitches. This bad boy blows them all away in every way.

Nothing fancy, strictly utilitarian and simple. Built like a bomb shelter and shows no signs of wear. I pull a Keystone Laredo 298BH almost bi-monthly and this gives me the flexibility I need to switch hitch styles between trailers. If you need a completely flat bed for hauling then you still have it versus bolted on bed rails. Much safer than a 5er extension and doesn't void the warranty on your travel trailer if there is a failure. I shimmed mine off of the truck bed to take out the slop with 2 sections of round baler belting from a tractor supply store attached via industrial adhesive and it works beautifully. It weighs a lot so swap outs are a bit of a chore but i wouldn't want it to be built any lighter. Bravo on a great product

Have not yet used or installed but looks to be well made and will work as described.

Just got it and it seems very well built.

B&W Companion. American made product! Very high quality. What a peace of mind knowing what my 5th wheel trailer is connected to.

Very easy to install and the directions were very easy to understand and follow.

I have a 2019 f250 with the 6.5' bed and didn't want a heavy, bulky fifth wheel hitch taking all the bed space up. I had the fifth wheel package already installed as well, so it didn't make sense to not use that. I about went with the ultimate hitch that Anderson offers but decided against that as I have seen many reviews where the hitch failed. I saved a bunch of cash going with this product and it is awesome. I installed it by myself in my drive way in about 2 hours start to finish. I have zero issues turning so close to a 90*. I have a headache rack on my truck and it gets within an inch or two of hitting that but not my truck. I don't have any issues with the king box hitting the bed either like some people stated. The test ride today went very well. It rode very smooth and I have plenty of bed space for my dogs and gear. I would highly suggest this product if you are on the fence like I was. I will see how this will hold up over the years but I doubt I will have any issues. The shipping effected the sheath covering over the cable, I contacted the company, sent some pictures and they will be sending me a brand new part. I love this company and the products they stand behind!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Very easy to install and the directions were very easy to understand and follow.

I returned it, because it was going to change the structural integrity of my 5th wheel camper. Did not use the product.

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

fit rite in works great!

This product is spot on, I installed it immediately and have used it twice. This product was an awesome option to purchase because of already having the B&W turnover ball system. This gave me the ability to install and the Curt Q24 slider to give the maneuverability needed when pulling a fifth wheel with a short box that the Anderson hitch did not provide. I have already used the slider option twice, it works flawlessly. Prior to the purchase of this Demco I purchased the Curt X5. The X5 did not work with my truck at all. The X5 did not even make contact with the bed of the truck for support. This Demco base to rails fits tightly to the bed of the truck. I have 2007 Dodge 3500. It is a short box mega cab.

Click to Enlarge

Click to Enlarge

Does exactly what is is built to do. I pull a 42’ fifthwheel that weighs 18000# with no hesitation anywhere. As always very happy with product and ther staff at etrailer. I will continue to use you for all my needs. Thank

Love this adapter. Works great on my Rota-flex kingpin and my B&W gooseneck ball. Lesson learned, re torque the primary clamping bolt after the weight of the trailer is on the hitch. I had it loosen up on me without realizing and the hitch rotated slightly in the bed while towing. After learning this it has never happened again.

Fast easy shipping. Great product. installed in a 2015 silverado duramax coupled to a rotoflex king pin box pulling a 40' toy hauler.

Love my 5th wheel hitch! Would suggest it to anyone!

Love this adapter. Works great on my Rota-flex kingpin and my B&W gooseneck ball. Lesson learned, re torque the primary clamping bolt after the weight of the trailer is on the hitch. I had it loosen up on me without realizing and the hitch rotated slightly in the bed while towing. After learning this it has never happened again.

Nothing fancy, strictly utilitarian and simple. Built like a bomb shelter and shows no signs of wear. I pull a Keystone Laredo 298BH almost bi-monthly and this gives me the flexibility I need to switch hitch styles between trailers. If you need a completely flat bed for hauling then you still have it versus bolted on bed rails. Much safer than a 5er extension and doesn't void the warranty on your travel trailer if there is a failure. I shimmed mine off of the truck bed to take out the slop with 2 sections of round baler belting from a tractor supply store attached via industrial adhesive and it works beautifully. It weighs a lot so swap outs are a bit of a chore but i wouldn't want it to be built any lighter. Bravo on a great product

Have not yet used or installed but looks to be well made and will work as described.

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

B&W Companion. American made product! Very high quality. What a peace of mind knowing what my 5th wheel trailer is connected to.

Quick delivery, I've used several different types of fifth wheel hitches. This bad boy blows them all away in every way.

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Looks great well built but holes for adjusting are to small for my application.

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Nothing fancy, strictly utilitarian and simple. Built like a bomb shelter and shows no signs of wear. I pull a Keystone Laredo 298BH almost bi-monthly and this gives me the flexibility I need to switch hitch styles between trailers. If you need a completely flat bed for hauling then you still have it versus bolted on bed rails. Much safer than a 5er extension and doesn't void the warranty on your travel trailer if there is a failure. I shimmed mine off of the truck bed to take out the slop with 2 sections of round baler belting from a tractor supply store attached via industrial adhesive and it works beautifully. It weighs a lot so swap outs are a bit of a chore but i wouldn't want it to be built any lighter. Bravo on a great product

Have not yet used or installed but looks to be well made and will work as described.

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

Great replacement for the Curt Turning Point pin box! Easy to install and took a couple hours since I did it by myself. I had to purchase new 5/8” locknuts as the originals from the Curt install needed replacing. I also had to buy (4) 5/8” nuts from Tractor Supply since the Curt install had nuts welded on the front 4 bolt locations. I used the Curt 5/8” bolts and flat washers since they did not need replacing. I haven’t had a chance to get the trailer on the road yet, but see no reason why it will not pull nicely with the Gen Y gooseneck. It will be pulled with a 2022 Chevrolet Silverado 2500HD 6.6 Duramax and 10 speed Allison transmission.

I love this hitch I put it on my 35’ Astoria fifth wheel it pulls great and the shock absorbers help with a smooth ride.we took a ten day trip from Ga to Maine last September and had no problems with this hitch. I guess the only negative is that it’s not as easy as a regular fifth wheel hitch to hook up by yourself but after a few times you can line it up ok. The best thing is that no big hitch taking up space in my truck bed just a ball

Click to Enlarge

Very stout and well built product !!

Click to Enlarge

Click to Enlarge

Click to Enlarge

ok i am a welder by trade. the welds on this have a lot to desire but should hold ok would have been nice if it had been painted easy fix though overall it will do the job i needed it for

I had borrowed an adapter from someone. It was the same as the one I purchased from you. I made several trips pulling a four horse goose neck trailer with no problems, so I decided to purchase an adapter of my own.

Fantastic service and follow up

Very heavy duty hitch. Installation was a breeze. Took maybe 5 minutes. The only complaints that I have is A.) you have to paint it and B.) the square plate was welded onto the tube crooked. No big deal it won't affect the function it just looks odd. Don't get me wrong I would definitely buy this again. Now I don't have to take out my 5th wheel hitch to use my gooseneck trailer.

fit rite in works great!