# 1
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens
Although this light looks the same, it is not. The hole pattern for mounting is different, and when I twisted the wires together, it did not light when turning on the lights. It is in still new condition and I will return it.
Exact replacement for Jayco running lights.
# 2
LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Oval - Red Lens
The lights I ordered were a oerfect replacement for my rv..
# 3
LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Amber Lens
I'm not sure I saw it in the listing, but these are in fact Command brand lights - exactly what Jayco uses on their trailers. I replaced almost all of my lights this year during a water damage repair (might as well right?). These were super easy install and being the same brand, used the same holes to mount back up. I elected to use wire nuts with them as opposed to the clamp conectors Jayco uses from the factory. Wire nuts worked great for them.
Easy installation. Works flawlessly
# 4
Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1
Quite easy to install and fit my Coachman Freelander perfectly. The prior ones were not sealed, filled with water, and blew the fuse fuse. Beware of the cheaper version on Amazon as they have the same poor seal problem as the original lights which died after <5 years.
Command Triple LED Tail Light Review They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system. This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow. Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.
# 5
LED Trailer Light w/ Reflector - Brake, Turn, Tail - Passenger Side - Oval - Red
Perfect replacement tail lights for my 2019 Jayco 5th wheel. Ordering online was simple, delivery was fast and installation was less than 15 minutes. Awesome experience
The products seem well built. I replaced originals on 5th wheel RV to match new clearance lights. Larger and brighter than the original lights. I would rate it a 5 star if the product included screws and gaskets to prevent water intrusion.
# 6
LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Oval - Amber Lens
These were really easy to install. I found that I needed more markers on the side of our 5th wheel trailer (44') I actually posted a few videos of people turning into our lane thinking they had passed the trailer. Connected to the rear and front marker lights and I have had no problems since.
Excellent service and communications! The staff is very helpful and polite. I don’t need to reach out to any other company for my trailer needs . Sarah worked with my till we got exactly what I needed. Please keep up the great work , we need you !
What our customers are saying:
"Just wanted to let you guys know how much I appreciate the quick service and order shipping. Your website is one of the easiest to navigate that I have ever come across, and it allowed me to find and order everything I needed to allow my '99 F-150 to tow a Coleman trailer. Thanks again Paul"