# 1
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
Quick shipping, haven’t installed yet, but all of the parts and good instructions were included.
I ordered and it was shipped a few minutes later. This kit comes with everything you would ever need to install this kit except for tools. Pleasure doing business thanks for a great product
# 2
Mounted in seconds, looks good, stops hanging wires. Self tapping screws are just bright coated, and sure to rust. Wish stainless hardware was provided.
Product is and works exactly as described.
# 3
Dielectric Grease for Electrical Connectors, 2 oz.
Great product, easy installation, fits great!
Great electrical protection for the vehicle. Used it on the trailer wiring harness. Works great.
# 4
Roadmaster High-Low Adapter - 2" Hitches - 10-1/4" Rise/Drop - 10K GTW, 400 lbs TW
The item looks fine. The implement would not slide into the hitch as the tolerance was too slim, not sure if it was the receiver or the implement, but I had to grind down the edges of the implement to get it to slide into the hitch.
Arrived sooner than expected. Etrailer ships very fast. It's a steel hitch... and works great.
# 5
Replacement Lift Brackets with Handle for Reese Weight Distribution Systems
I bought these to replace a bent bracket. Decided to replace as a pair. Work great on my Reese trunnion bar setup. Shipping didn't take long. Having installation instructions included was a nice touch.
These weight distribution brackets really helped my trailer hitch weight. I am glad that they really helped when I pull my toy hauler. Thanks for your products.
# 6
Replacement Roadmaster Tow Bar Quick Disconnect Brackets - Car Side Only
Easy to bolt on the brackets. Great fit with my old tow bar. These were bolted to the new EZ4 brackets. The tow bar brackets were easy to mount to my Grand Cherokee.. The kit was missing the poly pop rivets but they are being sent to me.
Parts came in good time. Thank you
# 7
Blue Ox Bolt-On Base Plate Bracket Kit - 5,000 lbs
Product arrived rather quickly and thats where the good stuff ends. The parts were seemingly unfinished from blue ox. The brackets had weld spatter all over them including on the mating surfaces as well as the one bracket had quite a sharp burr I assume from the cutting process of the eye. The paint quality was rather good but I was surprised to only see grade 5 hardware in the box. I understand grade 5's are more then strong enough but having grade 8 bolts would just give that extra piece of mind. Overall a good product but the finishing needs work.
just received. things look ok, but not tried yet. liked the fast delivery. thanks
# 8
Replacement Hardware Kit for Trailer Hitches
4 bolts 15 minute installation.
Everything you need and all high quality....was a snap to thread the bolts down through the frame.
# 9
Second Vehicle Kit for Roadmaster Even Brake Systems with Serial Numbers below 27,496
The convenience of having 2 vehicles set up to tow is really handy and this kit does the trick.
Hooked up pretty easy. I have a 17 F150 and i already had a Hopkins brake light relay installed so didn't need to splice into the wiring like the directions had on here. Little confusing on the brake pedal wiring needing to hook into the ICX transmitter. I did it but I don't think it did anything in my install. I also ran a power wire all the way to the battery rather than fiddling with the fuse tap.
# 10
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 8" Rise/Drop - 10K GTW, 400 lbs TW
Works great with Ready Brute Elite II tow bar.
This works perfect when I hook up my 2022 GMC Canyon (Stock height) to my motorhome to maintain level tow bars.
# 11
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 10K GTW, 400 lbs TW
Quick delivery. Works as designed.
Works like a charm! I bought an entire toad tow package kit wiring, breaking system tow bar, base plates everything ! My ranger all the way to Mount Rushmore last year and everything worked great! The trailer support was excellent whilst I was installing everything! Multiple calls to tech-support got me through and made for a successful install. I would not hesitate to buy From them again!
# 12
I mounted mine onto a piece of aluminum flat stock on the trailer “A” frame to reduce rock impact from Nevada’s gravel back roads. There really wasn’t good location on inside of trailer frame rails, was adding electric brakes and converting from 4 pin to seven. . I’m pretty darn happy with this junction box as it made rewiring rather straight forward. Our local 12 volt guru at the auto electric shop was duly impressed-wanted to know where I found it.
This box was used as part of an electric brake conversion on my trailer. This box was an excellent means of connecting the existing wiring and the new brake wiring into the new 7 way trailer connector. It has the required breakouts and grommets needed to make the wiring task the easiest part of the conversion.
# 13
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
Brakes work great! I used a self tapping screw to ground the brake to the trailer. This worked really well and I didn't need to run a ground wire. The studs needed a trip to the hardware store to get some 7/16 by 40 pitch (fine thread) nylock nuts. All in all a nice brake setup.
Needed to replace a magnet and brake shoes were well worn, this was the best way to go. Quick and easy replacement.
# 14
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
Etrailer is great. I have been using them since 2014 or 2015 for various stuff. This order was for electric Dexter brakes - ten inch. Some other suppliers offer similar ones for half price but they are not as good as Etrailer. Auto-adjust (they call it Never-adjust) is very important. Also the shoes are cut nicer. One of the electromagnets failed - open circuit - first time that happened. I had 6600 miles on it. Curious failure. Recommended changeout is 12,000 miles anyhow so I am not real upset. When you're flying down a 9% grade in the Rockies you want the best brakes and the best tires. Get Etrailer. Get the largest wheel and highest load range tires that will fit your trailer from Etrailer. I considered modifying the brakes to disc. $2000 plus they are not maintenance free either. Nothing is "maintenance free". I could change out all the brakes and drums 7 times for that $.
This is what you want. Do not cheap out. At first, I took my trailer to a trailer shop and specified American parts and told them to replace my brakes. They put no brand Chinese crap in my trailer and on my first trip in the rain I totaled my truck and damaged, my trailer and track car all because the brakes did nothing. So I bought the Dexters from Etrailer, put them in myself, and now the rig stops beautifully.
# 15
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 6K GTW, 200 lbs TW
great product,great price.solid constructed
Once again, Etrailer had just what I was looking for. This 6 inch lowering hitch allows my electric bike carrier to be lowered by 6 inches so that I do not have to lift so high to load the bikes. The extension also allows me to open the tailgate even with the bikes loaded.
# 16
Tail Light Isolating Diodes (Qty 4)
Received product in a timely manner. Need to separate the rear turn signals from the brake lights to convert the US tail lights to the European tail light assembly on my Cadillac CTS. Hopefully, this will help.
This product was easy to install. The system that was installed previously had the amber directional coming on when I hit the brakes. hooking up the diodes behind the tail lights is an easier system than the old one. It works great.
# 17
Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers
This light kit is just what I needed to finish my new Rola Railed Cargo Carrier for a professional look that offers additional safety to me and other drivers while mounted on my vehicle. Installation was easy. The included zip-ties were very helpful. For additional protection, I added black polyethylene tubing over all wiring and a few more zip-ties. The fit of the light grommets in the available holes of my Rola Railed Cargo Carrier was a bit loose, but not enough for the lights to fall out. They look great and function well!
The lights themselves worked very well on our weeklong trip. However, the reason I gave them three stars was because they didn't fit in tightly to the Reese Cargo Carrier (#63155) even though they were the ones that we were told by etrailer staff would fit. We used duct tape to ensure that they would not fall out. We had to later double up on the duct tape when pressure from cargo partially pushed them out.
# 18
No-Drill Mount for Electrical Mounting Bracket - Short
Package had hitch protruding out of cardboard. The wiring harness wire for the right side were short and I had to splice 3 wires to those that were short. The plug adapter was cheaply made. [online] guy said hitch could be installed with a floor jack. I would like to see him try it. Hitch appears to be of good quaility.
Came with beat up box. I already expected the hitch will be damaged, but it was worst than my expectation. It looks like the hitch was previously returned item, so it is not a new item and somebody put an effort painting the hitch to make it look like brand new, but the paint was not even and oversprayed. I did not bother opening the other box because I am already disappointed. I am returning the hitch including the accessories for the hitch.
# 19
Hopkins Endurance Flex-Coil Trailer Connector Adapter w/ Nite-Glow - 7-Way to 6-Pole - 8' Long
Excellent product... meets all of my expectations
Well made and showed up on time
# 20
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
High quality, perfect fit, easy installation, I highly recommend these.
This is a Dexter OEM brake assembly, so it was manufactured per Dexter spec's and quality control.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."