# 1
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Once I found this drawbar on etrailer.com I was convinced to order it by the excellent pictures of its application for a Jeep Liberty which has the spare tire mounted on the liftgate and needs the extra-long bar to get the ball past the tire. Thanks for the pix!
Thank you for the great service! Could not be more pleased with the service or product. Ken
# 2
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Purchased hitch ball, ball mount, hitch extender, wiring extension, safety chain extension, and storage bags for a Jeep Liberty. ETrailer has a great selection of products, with good prices, and fast shipping. We will definitely buy from them again. We have not had an opportunity to use the items purchased, but anticipate no problems.
Works perfectly on my Jeep Liberty. Excellent finish and weld quality.
# 3
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.
This product is exactly what I needed to make trailering my Kayak easier. My Jeep Liberty has a spare tire that has interfered with the hitching and unhitching of the trailer. The extension works perfectly. The Item was at my door in three days and on my Jeep minutes later. Great purchasing experience.
# 4
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.
Great quality
# 5
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Perfect size for a 2004 Jeep Liberty with spare wheel on back. Very nice quality. I can now mount my trailer hassle free.
BM20 Long Drawbar. Perfect for my 2005 Jeep Liberty. I no longer have to remove the spare to tow. Solved what was a major pain!
# 6
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Great products and service. I was able to order everything I needed to add a tow hitch and ball to my 2006 Jeep liberty. Very fast shipping. They even called me to verify orders and availability. Clear and easy to follow installation instructions. I hauled an [retailer] trailer from Texas to Ohio without any issues. Even bought a trailer and use it frequently for hardware stoe runs.
Purchased hitch ball, ball mount, hitch extender, wiring extension, safety chain extension, and storage bags for a Jeep Liberty. ETrailer has a great selection of products, with good prices, and fast shipping. We will definitely buy from them again. We have not had an opportunity to use the items purchased, but anticipate no problems.
# 7
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
Great product, Fast shipping, Good Price
Well built using it on my Honda side by side to pull trailers gave me all the height I needed and moved the ball out to miss the muffler works great and very sturdy thanks again for another great part from etrailer
# 8
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 9
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 10
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Went in just like it was supposed to. Quick shipping as always.
The exact part number my hitch called for. The salesperson Lisa, was extremely friendly, and made the ordering process, as smooth as possible. Thank you for your great service etrailer.
# 11
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
Good prices, always a pleasure to deal with! Great folks.
Exactly what I needed to extend the reach of the ball beyond my rear tire carrier WITHOUT losing any tongue weight capacity! I used mine for the 2" rise.
# 12
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
The ball mount was a complete failure even after a lengthy discussion on the phone. I wanted a ball mount that would accept the rocker ball and anti-sway bar. The bar sent to me can't be used this way. An email and phone message to the sales person I ordered with, got no response.
# 13
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.
This product is exactly what I needed to make trailering my Kayak easier. My Jeep Liberty has a spare tire that has interfered with the hitching and unhitching of the trailer. The extension works perfectly. The Item was at my door in three days and on my Jeep minutes later. Great purchasing experience.
# 14
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
Easy ordering, fast shipping and a quality product. I can't believe how much this Brophy Ball Mount Hitch weighs! Incredible.
# 15
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
eTrailer is the best! Fast ship and no problems I'll be using the heavy duty hitch to haul my 5,500 lb boat and trailer from Texas to Michigan this spring.
We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.
# 16
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
eTrailer is the best! Fast ship and no problems I'll be using the heavy duty hitch to haul my 5,500 lb boat and trailer from Texas to Michigan this spring.
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 17
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 18
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K
This simple ball mount will get the job done. It's a solid casting so it weighs a lot.
Great ball mount. I've had another like it in service for 8 years. Still like new/no wear. I'm getting another, because new truck hitch receiver is higher. A+++
# 19
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Extra length worked out perfectly. Allows the camper to tow behind a jeep liberty without the spare tire hitting the jack handle. I even use it on the f-150 And can open the tailgate with the trailer attached. Thanks for the great description and prompt delivery.
This product is exactly what I needed to make trailering my Kayak easier. My Jeep Liberty has a spare tire that has interfered with the hitching and unhitching of the trailer. The extension works perfectly. The Item was at my door in three days and on my Jeep minutes later. Great purchasing experience.
# 20
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Good prices, always a pleasure to deal with! Great folks.
3.5 stars. Product looks like it should perform as advertised, but it arrived with several chips in the paint. This is most likely due to improper surface preparation and cleaning before the powder coat was applied. As you can see in the photos, there is already some surface rust on some of the areas, including the hole for the hitch pin. Ultimately the paint will get scratched up from use, but it would be nice to see some extra attention to detail from the factory.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"