# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I had tested while driving with the hitch ball on it and with it on the lowest setting it would scrape against the ground when I am going down a slight slope. I had to switch it to the highest setting to avoid it, it still scrapes so I just leave it off until I need to start towing things.
Perfect fit hitch,wiring kit super easy, great price and shipping. We will be repeat customers when we purchase another vehicle!!!!!!!! Thanks for the great service!!!!
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
All in one kit is Very convenient. but before you order, ensure the rise/drop of this ball mount is correct for your hitch/trailer. Also - there is a gusset plate welded on the back of the ballmount (Drawtite 2953) in this kit, - on the 2010 Dodge Caravan with the Draw Tite Class III hitch,this plate just rubs/touches the bumper, so this draw bar can't be used on 2006-on Caravan.
Nice little bag to store the extra ball and the ball mount when it is not in use. This is an excellent product, pulled my trailer within minutes of installation without a problem. Great feature with the removable ball, includes the 1 7/8" and 2" ball, this is awesome. The 2 3/4" rise fits my Caravan and trailer like they were custom made for each other. The trailer rides almost PERFECTLY level with the trailer. Put an actual level on the trailer after hooking it up and it is only a hair off the level, and of course this is probably due to road conditions. Great product at a fabulous price! I have informed all of my friends and family where to go for all their trailer needs. Thanks ETRAILER.COM! ! !
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
I bought this separately when I bought a new hitch. It appeared to be less expensive to buy the hitch, ball mount, and ball all separately. there's not much to say, just get the one with the correct amount of rise/drop for your car and trailer. 2" rise is what I needed for my Grand Caravan and jet ski trailer.
All ordered parts arrived in good condition, and were correct. Impressed with on time delivery. Hitch and wiring harness were a perfect fit. Only had trouble finding correct wire from brake light switch on 2016 Dodge Caravan .
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
The web site is so informative with reviews and how-to videos that it made the decision very easy to determine what drawbar kit I needed for a 2012 Grand Caravan. I like the fact that I did not need to talk to customer service to figure out what I needed, all the information was available. Price and shipping was very competitive and I received the order in 3 days.
It fits nicely, is very well hidden under the vehicle. It is worth knowing that one nut requires very high torque.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 6
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
Real fast shipping on top of a great price lead to easy instalation. Done it all by myself with no problem but working the frame bolts out is tough. Make sure to run them back up and down while taking them out to avoid breaking.
# 7
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
The purchase was what I expected, it was well packed and delivered very quickly. I would order from etrailer.com again.
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
# 8
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Looks well made and arrived very promptly
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
# 10
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 11
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Delivery was delayed from the manufacturer. Further delay was encountered when shipment was mis directed to Sheboygan. When it finally arrived there was a hole in the box and the receiver was poking out. Lucky the paint wasn't damaged. The part is what I ordered.
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
# 14
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 15
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Great product
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 16
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 17
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
Real fast shipping on top of a great price lead to easy instalation. Done it all by myself with no problem but working the frame bolts out is tough. Make sure to run them back up and down while taking them out to avoid breaking.
# 18
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
# 19
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 20
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."