Best 1973 Ford F-100, F-150, F-250, F-350 Trailer Hitch Ball Mounts

I have used B&W hitches for many years and I've been very happy with the quality of their products. etrailer makes it easy to shop for these hitches since the B&W site is terrible. I was able to find the correct size and all dimensions were listed clearly. Thanks again!

Really heavy duty solid steel 2 inch square, really thick steel tongue and and tight fitting hole for the ball bolt so little chance of ball rattle or slipping. Nice smooth welding and finish.

Super hitch. Best money spent for towing so far. Prompt shipping and a pleasure to buy from this vendor! Thrilled with my experience and will look here for all my trailer and towing needs.

Love these hitches. This is my second one. Honestly, it will save you money. One month a few years ago, I spent $300 on hitches because I would forget or did not have the right height, ball, etc. finally bought a b/w and never had a problem again. I bought this one because I got a new truck with 2" receiver. Great quality, simple, reliable.

To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.

Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.

I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.

The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.

This item is so universal also a good deflector if you might get rear ended! Perfect fit for my 2013 Nissan Rogue. Thank you etrailer.com Very good Engineering... William

Oh my sweet adjustable hitch from the future, where have you been all my lifted truck life?! ?? Let me tell you, this GenY adjustable hitch is like the superhero sidekick my overgrown, behemoth of a Dodge 1 ton needed to conquer the highways and byways with style, swagger, and an adjustable drop that's got me feeling like a towing wizard! Picture this: my truck, the size of a small building, with tires that could probably qualify as a down payment for a small country. And then there's the trailer – it's like a mobile home with an identity crisis. Traditional hitches quiver in fear when they see my rig coming, but not the GenY. Nope, this hitch faces my truck's titanic drop with a grin and says, "Bring it on, buddy!" So, what's the deal with this hitch, you ask? Well, let me break it down for you while keeping my excitement level in check (which is near impossible): Adjustable Awesomeness: The GenY hitch doesn't just drop – it swoops, it dips, it twirls. Okay, maybe not twirls, but you get the idea. You want to tow your luxury yacht or your miniature house? Boom, this hitch adjusts to whatever mind-boggling height difference you can throw at it. Zero Drama, All Towing Nirvana: Remember the time when towing made your truck feel like it was dragging a herd of elephants through a mud pit? Yeah, those days are over. With the GenY hitch, my Dodge struts its stuff like a runway model with a trailer in tow. Smooth as butter, I tell you. Smooth as butter! Weightlifting Champion: I swear, I've pulled everything short of a small planet with this hitch. The GenY hitch handles weight like a pro wrestler handles dumbbells – effortlessly! No creaks, no groans, just a confident "I got this" vibe that makes me want to challenge it to a bench press competition. (Spoiler: I'd lose.) Confidence Booster: Have you ever seen a truck hitch that oozes confidence? Well, you're about to! Every time I back up to my trailer, I can practically hear my hitch saying, "Don't worry, buddy, I've got your back!" And it does, every single time. Conversation Starter: I can't tell you how many times people have walked by my truck and trailer combo, only to do a double-take at the hitch. It's like having a celebrity accessory for my truck. Sometimes, I feel like rolling down my window and saying, "Oh, this? It's just my GenY – no big deal!" In conclusion, my GenY adjustable hitch is not just a hitch – it's a legendary partner in crime for my lifted Dodge adventure-mobile. If my truck could write reviews, it would probably leave an even longer, more passionate review than this. But for now, take my word for it – if you're towing with a truck that's on the verge of having its own postcode, get yourself a GenY hitch and let the good times (and the trailers) roll!

First of all, the products you find at etrailer are not your garden variety, home depot kind of fair. Much higher quality and grade/weight ratings. So to be able to get hard to find items and then by orderring at least 100$ worth of stuff also get it delivered free in 4 days, is awesome. The prices are incredible too.

My 2018 F350 chassis cab has a Knapheide service body with a Buyers hitch installed by Knapheide. It is bolted and welded in place. Unfortunately, it only has a 2" receiver. To have them change to the 2.5" receiver hitch would cost me approximately $1200. The 20,000 lb. Curt replacement hitch would not work on this truck with this bed. The Buyer's hitch has a weight rating of 16,000 lbs. and 1600 lb. tongue weight. Fortunately, Curt has come through again for me with this ball mount. I bought two: one for my 2" ball and one for my 2-5/16" ball. They are great and the drop is very close to what would be perfect. Your towing set-up is only as strong as your weakest link and I now know the the ball mount is definitely not my weakest link. One note to Curt: When you put the stickers on your ball mounts, make sure they're clean. Before I even towed, the thick Curt sticker on both ball mounts started coming off. It feels like there is some kind of coating possibly on the mount and then the decals were applied. I tried pressing them both back on but I doubt they'll last the rest of the week. But as always, Curt has built me a great product for my needs. I'm a one man landscaper business but have spent quite a bit on Curt hitch products because they WORK.

Retail type stores only carry mainstream items so when I needed a special length ball mount for my 2011 Traverse I found the size and quality with Curt Products .

Recently bought a Kubota RTV x900. The receiver is located under the bed. With the extra long ball hitch drawbar I can easily get to the drawbar and use a clevis to hitch my 5ft. wide mower or attach a ball and use the trailer. The pictures will illustrate the length of the drawbar which makes access very easy. The product is heavy duty and well made. Ordered this product on Thursday morning and it was delivered the next day, Friday afternoon. Customer service was helpful, will use etrailer again. Thanks

Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.

I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY

Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.

I needed a hitch that I could haul my work trailer with and still drop the tailgate without dropping the trailer. I looked on etrailer and found one that would work barely but decided to call etrailer and see if anyone had any ideas. Steve answered and looked after I told him my requirements and came up with this. This has a longer distance from ball to pin by a few inches compared to the one I found so my tailgate will still drop even if I’m at an angle to my trailer or on a hill. Also with the adjustable height it’s great. Awesome hitch. Solid for a good price. ??

We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.

A year has passed with my Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount and I have nothing but praise for this mount. Once you find the correct height to have a perfectly level trailer there's no need to adjust. The beauty lies in the cushioning! Towing a Yamaha AR190 (3200lb boat and trailer combo) is silent. Even over the bumpiest pavement the tow is smooth. There is no harsh slamming when braking or taking off from the boat ramp. I don't know why everyone isn't running one of these, I wouldn't run any other hitch mount PERIOD! If you're on the fence, get off and buy one, you will NOT regret it!

Looks to be a well built hitch there's virtually no other 12" drop hitches short of expensive adjustable ones it's just about right for my custom bumper

Arrived today. Fast shipping, and thank you for that! Seems to be a quality ball mount. Just what I needed to get the ball lower to tow my trailer. With this, now the top of the ball is at 16" where it needs to be. Custom built receiver on my old moving box van. Just need to weld on safety chain slots and paint it. Can't drop the lift gate with the receiver in (its pinned on both sides), but hey....I can tow now.

This ball mount gives me the adjustment I needed on my Dodge Grand Caravan when I rent different trailers. The part that goes into the hitch does have a little play but it is no worse than my current fixed height ball mount. The adjustable ball mount with the 2 pins also has about a 1/8" play so be ready for that if you buy this adjustable ball mount. That would be the only improvement I think they could make in the future is to have the pins a little larger and/or the holes a little smaller to reduce the play. However, this might just be the way these need to be designed at this price point based on the research I have done with other adjustable hitches.

Unit worked, but the fit between the 2.5" adapter and the hitch was loose. It caused the trailer to rock back and forth with every application of the brakes. Had to make shims to stop unit from clanking. Felt like if length of attaching piece was longer it would had helped. Attached picture to help illustrate.

This ball mount has served it purpose well. I purchased a new travel trailer that is heavy enough to require a weight distribution hitch when using the factory installed Class III hitch on our Dodge RAM 2500. I decided to upgrade to a Class V hitch combined with this ball mount to take delivery of the TT in order to defer decisions about a WD hitch until the actual load conditions were known. The hour trip home with this setup worked very well. Once the trailer was outfitted I was able to determine the actual tongue weight of the loaded trailer and I decided to purchase an appropriately sized Reese Straight Line WD hitch. However, this ball mount comes in handy for moving the trailer short distances without hassling with the WD system. The purchase experience through etrailer.com was first rate.

I was surprised at the heft and quality of the ball mount. Shipping was fast, communication good, easy and informative website to use. Thanks etrailer, you have earned a new customer!

My newer Chevy K3500 has a 2 1/2 inch square receiver so I was able too get rid of my 2" ball mount that was almost too heavy to lift and replace it with a new Reese tri- ball mount with a 14,000 lb Gross towing capacity and weighs less than 12 pounds. Thanks to Cathy H. and Chris W. at etrailer.com for finding the right equipment for my needs.

Despite some of the conflicting reports on here about the Reese Tri-ball Titan Hitch fitting 2011 and up Super Dutys I took a gamble and it payed off. It fits my 2012 Super Duty with no issue. I didn't have to grind the corners or take the sticker off or remove any paint. Thanks for the great customer service and answering my questions.

My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks

We have a Pink Tractor (google Mom's Pink Tractor) that we pull to events, mainly in Ks, Ok, Mo, and Ne. We have around 35 events a year we take the tractor to to promote breast cancer awareness. The other day my wife and I were leaving for an event, i had let a friend borrow the hitch to see how he liked it. In less then a mile from the house my wife started complaining about the trailer jerking. That is coming from a lady that really was upset when I paid that much for a hitch. She told me to stop and buy one. (a long and expensive trip, we had to stop at a casino so she could rest her neck) I could write a review with a lot of trailer talk, but, this story tells the story.

Perfectly as described, Box was a heavy hitch and the box must have been damaged in shipping so it was a little delayed. You can't mess up a forged hitch it still is in excellent condition.

I bought this to use it for the 3 inch rise it provided. I have a lowered truck and towing my car carrier would prove to be difficult at times. The 3 inch raised that this provided made the trailer stay in a more manageable position. The heavy solid metal construction is of extremely high-quality. I would not have any hesitation towing something at the rated 16,000 pound capacity.

Highly recommend! Exactly as expected and fast shipping. Thank you

Installation photo

This is really nice. Beveled edges so it slips into receiver hitch so sweet. Beautiful welds heavy weight mount for my weigh safe ball. I bought a 10,000 lbs hitch and I wanted a draw bar with the same type rating. Now the only thing limiting my trailer capacity is my truck's ability to tow, not the hitch, bar or ball.

I purchased a Ranch Hand rear bumper for my 2500HD but wanted to retain the use of a receiver hitch. The ball mount would need to extend 8" from the pin hole to even reach the edge of the bumper. This BM29 ball mount works out perfect. The welds look great and the finish is just fine. The only complaint I have is they gained a little length by moving the pin hole a little closer to the end shortening the insertion amount slightly. Not a big deal, it is just noticable next to the other mounts I have at the house.

I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.

I got a hitch for my Honda accord it was extremely easy to install took less time than they estimate after I installed it I bought a trailer and have hauled various things already with no problem I would recommend e trailer to anyone

I needed the dropped ball for my motorhome to tow my Jeep. More importantly I needed the long shaft into the receiver for a device that bolted onto the shaft. This hitch worked perfectly in all regards. High quality and fits perfectly.

Product was shipped well packaged in a box to avoid damage. Perfect height and length for my F150 front receiver. This should make moving my trailer in tight spaces easier.