/
MaxxTow/
Adjustable Ball Mount/
Fits 2 Inch Hitch/
Class III/
5000 lbs GTWItem # MT70067
Retail:$65.66
Our Price: $42.27
You Save: 36%Orders above $99 qualify for Free Shipping
Adjustable ball mount fits 2" trailer hitch receivers and provides up to a 10" drop or 8" rise to fit your application. Channel-style mount offers different height positions. Constructed of sturdy, black powder coated steel.
Features:
Specs:
Video of MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 10" Drop, 8" Rise - 5,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number MT70067. This is the Maxx Tow eight position adjustable ball mount for a two inch hitch. This adjustable ball mount will offer eight different positions to match the height of your application. Itll work good if youre towing trailers of different heights with the same vehicle. It has a channel style mounting system, which is easy to adjust. You can move the ball up or down along the channel.
Then you just secure the ball mount in place with the included pins and clips. This is made of a sturdy steel construction. It has a corrosion resistant black powder coat finish. This does fit on a two inch trailer hitch receiver. The gross towing weight capacity on this is 5,000 pounds.
The tongue weight capacity is 500 pounds. It does have a maximum drop of 10 inches. Basically Ill show you a quick measurement of the drop here. The drop would be measured from the top of your receiver here to the top of where the ball is mounted. If we go up you can see its going to be 10 inches maximum drop.
Now if you put it the other way and do the maximum rise you would again measure from this top of the shank to the top of where the ball mount would be. If we do that that would be maximum rise is 8 inches. Now you can adjust when it says eight positions adjustable. It has holes drilled here on the shank and each one is an inch and a half different from center to center. You can adjust it four positions down, like in a drop position.
If you do it in the rise you can adjust it four positions up. Thatll give you your eight different positions that you can adjust this ball mount for. The distance from the hitch pin hole to the center of the hitch ball hole, this distance here, will be basically 12 inches. The ball hole dimension, right here, uses a hitch ball shank diameter of one inch and the length of this shank here is going to be 10 of an inch. I just want to show you briefly what you would do. You would have the clips on this side. If you just remove both clips and then pull out the pin that will allow this ball mount, this channel mount, to go up or down. In the drop position and if you turn this over and use it the rise position oops, actually use it this way, there you go. Thatll let you use it in multiple four different positions in the rise and four different positions in the drop. That should do it for review on part number MT70067.
Average Customer Rating: 4.9 out of 5 stars (197 Customer Reviews)
Adjustable ball mount fits 2" trailer hitch receivers and provides up to a 10" drop or 8" rise to fit your application. Channel-style mount offers different height positions. Constructed of sturdy, black powder coated steel.Received product when expected and in great condition. Have not used the ball mount yet, but have no worries based on its heft and construction it will fit great. After changing tow vehicles my old ball mount did not have enough drop so I researched another fixed ball mount with a drop but ultimately decided on the adjustable mount to ensure I had future flexibility with whatever car I have. 168140
This is the third time I've ordered from etrailer in about a month. Everything I got has been exactly what they said it would be and functioned as it should. Very good packaging and detailed instructions. Very good, fast and friendly service. Was notified by email when order was placed, when it shipped and a follow up after each order arrived to see if I was satisfied. P.S. I like the etrailer.com boxes. My neighbors don"t think they are adult diapers when they see them on my porch lol. Thanks again for the great service. Jim 394170
Excellent service from etrailer. This product seems very sturdy. One should always adhere to load limitations.Given the rating of 500 lbs hitch and 5000 lbs. Gross tow, I have no doubt the product will deliver. When purchasing a hitch or drawbar.....the user should be aware that anything CAN be broken with enough force applied. That 5000 lbs limit should be given proper attention. Most trailers with 2 axles could overload this drawbar. Most full size pickups weigh more than 5000 lbs. A mid-sized sedan or crossover gets very close. 177650
Functions as expected at a good price. Had to add spacers to prevent rattling. 550089
The hitch works great with my high truck. I'm a little uncertain about the tounge rate rating. The hitch is rated to 5,000 pounds, which is more than enough but the tounge weight is only 500 lbs. if I'd researched this I might have bought a different hitch. My load will be around 4,300, 2 horse trailer loaded. I guess it depends on which formula I use to calculate tongue weight, but if I go with 15%, I'm overloaded; 10% I'm okay. It seems tongue rating should match the hitch rating. 231921
I have not used this product. 570402
This ball mount fits the bill for me. Not only can I use it on my pickup truck but will be able to use on my car and ATV as well. The etrailer website is very good as to the help and videos in order to select the appropriate use and products. 481604
e-trailer comes through again! Good price, fast shipping and a EZ to use drop nice finish good fit 115277
Works well, I dont use it for very heavy loads but I like that not having to carry extra mounts for my different trailers.e-trailer is the best!! Had a blowout, needed a tire could not find one in any store, we were passing the area on a Sunday no less I was met at the side door with a tire.
JohnnyT - 01/31/2015I use this adjustable hitch for both my 2008 4 runner,as well as my 1995 chevrolet G20 van and its perfect! 447180
E-Trailer, I am happy with the equipment I received. I must admit I am somewhat disappointed the I did not receive the two hitch pins that are in the photo. The tow hitch (photo) does not show the ball assembly, in which I had no problem ordering. However, the photo does show the two hitch pins, that was not included in the tow hitch assembly. 218419
I needed this for my 2016 Kia Sorento, as the hitch is set pretty low to the ground. The product arrived very quickly and is in perfect condition (no gouges in the paint or other issues). Very satisfied with etrailer as always. 367237
Thanks for checking in.. its still working just fine.
Jim - 04/25/2018I have not installed the adjustable ball mount yet. It appears to be of good quality will do the job, which is an odd step up installation. The videos on the website made the selection process simple and gave me the confidence to order it without going to a trailer supply store and deal with the a salesman and finding they probably do not have this item anyway. The ordering was easy and the follow up by etrailer has been great. I have ordered in the past and continue to look forward to the next time I need something. 111896
Just what I needed. Excellent quality. Just add the proper ball size and you are ready to go. Fast shipping. Great customer service. Will order from e trailer again!!! 151624
The Ball Mount has been an excellent product.No problems at all.
Tom C - 09/28/2015Product was just as it appeared on your website. At first, I ordered a similar product which turned out to be discontinued. Stacey A called, explained the situation, and helped me select a suitable replacement product and complete the reorder. The product was tracked and delivery was announced via email. The product was delivered in the time frame estimated and was in perfect condition. Stacey A sent a follow-up email checking to make sure all was satisfactory. This was my second purchase from etrailers and both have been great experiences. Thanks. 464155
Etrailer website works great! They contact you within minutes to get the product on its way. Customer service is top notch as well. Had my ball mount within three days of placing the order! Excellent quality, just what I needed to tow with my Jeep with 3.5 lift. Will recommend to friends . Thank you 178212
The only thing keeping this from an Excellent is there wasn't a third cotter pin to attach to the car. Wish there was a note somewhere so I could have ordered at the same time. Now I have to roll over to Wally World to purchase...other than that it is a solid piece of equipment and was delivered right on time. The price was also the best I found anywhere! 231643
I was very pleased to have found this product at etrailer. I couldn't find one that had this much versatility in my home town. I have a Ram 4x4 truck that sits higher up than a normal truck, and this is exactly what I was looking for. I needed more drop and this one is perfect for my needs. Also, thanks to etrailer for expediting the shipping at no extra cost to me. I now will be able to use this hitch for a variety of trailers without having to switch receivers constantly! Well made and less expensive than ordering from hometown stores. 521631
I had just purchased a new trailer, and knew immediately that the tongue weight was incorrect. The e-trailer site had all the information I needed to measure the drop for my new trailer. Mine came in at 8 and three quarters. So, I opted for the 10 inch drop 5K GTW vs the 9 inch drop 6K GTW for half the price. The product that came was exactly as described and pictured. The weld joints were all clean and smooth and painted. This would be my second purchase from a trailer, and I'm quite pleased with all the selections offered and the quality of the products received. 256934
Looks strong but I have a bit of a biased opinion on the quality of the weld as I am a welder myself I know their strong but their not the prittiest. But aside from that. I'm very satisfied. It came at sooner than I expected and iv already put it to use. 163124
everything looks good. i sure needed the 10 inch drop. will use it this week end. the way etrailer handled this was great. even down to the map of tracking the shipping. the order was only in house for about 30 minutes and i received a e-mail that it was ready to ship. that afternoon another e-mail that it had shipped. Very efficient. got it the day they said it would be here. 97321
I have not used it yet, but I put it all together and on the car with a 2” ball. The ability to be able to tow in so many positions it just what I was looking for. I had not seen anything like this before, I always had like 3 different trailer hitches that I had in the garage. So I would grab the one I thought would work and hope it did! 566900
This has been a really good hitch. Easy to use, strong, and very versatile. My Colorado p/u is factory lowered and a standard hitch configuration is so low that launching my boat is nearly impossible. (The tongue is low, making the stern of the boat high. So, the back of the boat doesn't get deep enough into the water.) Pulling the boat off of the bunks is nearly impossible. By raising the ball height, the rear of the trailer rotates downward, getting the stern of the boat more into the water. Even at shallow launch ramps, the boat can float itself from the trailer, and I don't have to pull it off of the bunks. For road trailering, I can lower the ball height to lower the trailer tongue and get a proper weight distribution. This hitch has really worked well for me. If you launch a boat, or recover mobile equipment onto a trailer, being able to securely lower the back of the trailer has a lot of advantages. 441588
I searched long & hard for an adjustable trailer hitch for our Jayco pop-up. Finally found the MaxxTow & etrailer.com had the best price anywhere online. George at etrailer emailed me & put a rush on the order--unsolicited by me--which allowed us to take our vacation on schedule. We also used the hitch for the cheerleaders' float in our hometown parade; the Dad pulling the float had a new truck that was WAY too high for the trailer. The MaxxTow was perfect for this application as well. I'll definitely shop etrailer FIRST anytime I'm looking for trailer or RV products in the future. Thanks George & etrailer! 401560
I ordered this hitch to accommodate my smaller truck (Chevy S10 Crew Cab) for the Utility Trailer I finished building which now has leaf springs underneath for better ride/suspension & height. I ordered this hitch and added the 3 day shipping, AND, it arrived in 2 days! I am very pleased with this hitch that's matched with a 2" Ball, It works perfect for my truck/trailer and the adjustment options are perfect for what I need! 208975
There's a lot of choice for adjustable ball mounts and I bought this one based on price versus the low weight loads I intend to use it on. First impressions are that it's a well made, easy to use, sturdy product. It's only been fitted for 24hrs so I'll report back once it's been used to tow something. 545107
I ordered this to tow a vintage pop up that I had just purchased. The hitch was great because the pop up tongue and the receiver were different heights. Well fast forward a few months and my tow vehicle was totaled and get a different car. Since this is so adjustable it worked perfectly for my new tow vehicle! It is very durable and the pins stay in no matter how bumpy the road. 276398
I am still very pleased with the hitch that I bought!
Joy - 07/26/2017This product is cleverly designed - it provides adjustments from 8" above to 10" below the ball of your hitch. I intend to use it to lower the hitch on my motorhome so that I can tow a tow dolly that runs optimum at 16" while my hitch is 24" above. My only concern is that the extension will be driven into the pavement and ruined when the motorhome goes through a dip at driveways etc. The product appears to be very well built although it is rated at only 5000 lbs. It looks to be built at least at 10,000 lbs level. 282843
This hitch is is very rugged and has a very wide range of vertical adjustment. Just what I needed. 389973
There are two aspects of buying products; first, the service from the seller, and second the product itself. My first order was shipped promptly, but the box arrived damaged and taped up, with the platform piece missing. I responded to an email and called them the following day and without batting an eye they immediately shipped the replacement part which arrived a few days later. Super impressed by the customer service there. The hitch itself is absolutely perfect for my needs and very well constructed. I like that it can be inserted into the receiver up or down to give a wide range of possible towing heights. This was my first purchase here on etrailer.com, and I will be back! 525384
Fast shipper and a quality product than ks 185783
Love it love it love it
Bill a - 04/16/2016Excellent fit on my Jeep with three and a half inch lift and 37" tires. I flip it over for storage and no drag when off-roading - doesn't hit the ground on steep dips, etc. I can now tow a trailer with my lifted Jeep and still keep the hitch on the vehicle when not in use. 114817
Proven to be an excellent investment! Very pleased with the unit.
Robert T - 01/27/2015High quality equipment at the best prices. And the customer service is unprecedented. This is the place for the best stuff with personal attention 619571
hi folks i just installed my trailer hitch.. yahoo!!! everything works great ... no missing and/or smooched parts! 619391
Wide range of adjustability and very reasonable price. 616610
looks great,and works very well.thank you for great service. 611706
I am very pleased. The guides arrived very quickly -like two days -and were easy to install. I have ordered everything for my used trailer including spare tire, trailer hitch receiver and the ball mount. The ball mount gave me an 8in rise which is what I needed for my Toyota Tacoma. Etrailer follows up and does a great job. 602903
Great flexibility. 600144
2 inch Mount for sure! Should've looked before buying but overall a great piece! 599830
It works great, love all the height options. With how high my truck sits, the amount of drop is perfect. There will be many trailers pulled using the maxxTow receiver hitch. 598147
Although I have numerous products when setting up my truck for towing, I am hoping and believe that this adjustable trailer hitch/ball mount is the last one that I will need to buy. 592666
would get a 5 star if your could purchase a second ball mount so I could switch between 2" & 1 7/8" as I do work for a campground and boat yard and need to move trailers of different tongue heights and ball diameter. Otherwise a good sturdy hitch, time will tell how well the paint/powder coating will hold up. 585349
This hitch has proven to be quite nice..... I have several different trailers and this hitch I have been able to adapt it to each, allowing the trailers to haul close to level for each. Most of the trailer's load is positioned over the trailers tires, making it much easier to haul.......I recommend this hitch if you have several trailers to haul........ 582154
It was what I needed. Haven’t use it yet but I’m impressed with the quality of the hitch. One review said the two hitch pins were not included but they were included with mine. I bought two extra hitch pins, needed one and now have an extra. The service was great, they up my delivery to next level free of charge. It was ordered and shipped the same day. 582025
just what it shows. think it will work great. 581711
excellent, received the part sooner then expected. very fast service, Thanks Ron 580298
After lifting my 2006 Jeep Grand Cherokee I was towing trailers with a 6" drop hitch which met my needs perfectly. Recently I purchased a new enclosed cargo trailer that was much lower to the ground. The 6" drop hitch raised the front of the trailer too much and was wearing grooves into the ball. I debated on flipping the trailer axle brackets or buying a new drop hitch and decided on the drop hitch. It is heavy and built with good quality welds and materials. I did add a few shims between the two adjustable pieces to tightening it up a little (personal preference). 579776
More quality products and superior serv ice 579551
This product does an excellent job at a much more reasonable price than many other receivers. This receiver will last through many different trucks thru the years. It can be used now on many different trucks now. 547598
I have not used this product yet. It was just delivered. However, I have installed it and it meets my expectations for fit. I also expect that it will do the job I needed done. Will probably use it in the next few weeks. 530200
Fast Shipping, Correct Order, Works Gre at! 529738
Ask the Experts about this MaxxTow Ball Mounts
Do you have a question about this Ball Mount?
Do you have a question about this Ball Mount?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.