Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 9" Drop/Rise - 32K

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 9" Drop/Rise - 32K

Item # 325-GH-1724

lowest price pledge

Our Price: $449.99

Ball Mounts

This item qualifies for Free Shipping

Shipping Weight: 69 lbs

Quantity: 
In Stock
Gen-Y Hitch Ball Mounts - 325-GH-1724
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Fits 3 Inch Hitch
  • Adjustable Ball Mount
  • 32000 lbs GTW
  • Drop - 9 Inch
  • Rise - 9 Inch
  • Gen-Y Hitch
  • Two Balls
  • Stacked Receivers
  • Built-In Pintle Hook
  • Steel Shank
  • Steel Ball
Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs. Call 800-298-8924 to order Gen-Y Hitch ball mounts part number 325-GH-1724 or order online at etrailer.com. Free expert support on all Gen-Y Hitch products. Guaranteed Lowest Price and Fastest Shipping for Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 9" Drop/Rise - 32K. Ball Mounts reviews from real customers.


  • All Info
  • Reviews (4)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

Gen-Y Hitch Ball Mounts - 325-GH-1724

Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.


Features:

  • Adjustable ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into hitch receiver on your vehicle
    • 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
  • 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
    • 2 Pins included to secure accessories to shank
  • Adjustable height lets you tow trailers of different heights with the same vehicle
    • Drop ball mount lower or raise it higher to match your application
  • Heavy-duty steel construction
  • Zinc primer and powder coat finishes resist corrosion
  • Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
  • SAE J684 certified
  • Made in the USA


Specs:

  • Application: 3" x 3" trailer hitch receivers
  • Built-in receiver size: 2-1/2" x 2-1/2"
  • Maximum drop: 9"
  • Maximum rise: 9"
  • Gross towing weight: 32,000 lbs
  • Tongue weight: 3,500 lbs
  • Overall height: 12-3/4"
  • Total length with included ball mount installed: 17-3/8"
    • Total length without ball mount installed: 13"
  • Ball sizes: 2" and 2-5/16"
  • Hitch pin hole diameters: 5/8" and 3/4"
  • Accessory pin hole diameter: 3/4"


dimensional diagram

Multiple Stacked Receivers for Easy Adjustment

stacked receivers

This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.


pintle hitch

Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.


With the 4 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.



GH-1724 GenY Hitch Mega Drop Adjustable Versa Ball Mount with Pintle Lock for 3" Hitch Receivers - 9" Drop/Rise - 32,000 lbs







Video of Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 9" Drop/Rise - 32K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Gen-Y Hitch Ball Mounts - Adjustable Ball Mount - 325-GH-1724 Review

Speaker 1: Today we're taking a look at the Gen-Y Mega Adjustable Receiver Hitch. This unit is very heavy duty. It features a 32,000 gross trailer weight rating, that's when using the 2-5/16" ball, and a 3,500 tongue weight capacity. When using the 2" ball, the gross trailer weight rating does get dropped down to 16,000 lbs. this unit is designed for 3" hitches, so it's got the nice 3"x3" solid shank on it. This is ideal for heavy duty towing applications.The mount can be used in either the drop or rise positions and provides up to a 9" rise or drop.

You'll notice there's four slots here on the front, so there's four adjustable positions. This allows you to move the ball mount to any one of those slots, that way you can tow trailers that have different coupler heights. This helps ensure that your towing setup is always as level as possible. When you're using this slot, that's gonna be straight out from the hitch that's on your vehicle. The second one here provides a 3" drop.

Then you have 6" drop and 9" drop. You flip the mount over, and you have those same measurements available with it in the rise position as well.Each receiver opening measures 2-1/2"x2-1/2", and the unit can be used for multiple purposes. For example, you can use one of the top positions for a bike rack or cargo carrier and you could use a lower position for towing your trailer. You can use the reducer sleeve to drop the opening size from a 2-1/2" opening down to a 2" opening, that way you can carry standard 2" accessories like a ball mount, a bike rack, cargo carrier, and so on.The unit is fabricated with heavy duty steel, so it's very strong and durable. It's precision milled and drilled for a perfect look and fit, and it features a corrosion resistant design.

On the main portion of the unit, it has this crackled finish. That's a durable silver vein powder coat finish. The pintle and the Versa ball mount has a black powder coating, and even the pins and clips are coated to resist rust and corrosion.The Versa ball mount has two hitch balls on it, so you can tow trailers with different coupler sizes. You have 2" ball and a 2-5/16" ball. It has a slot here in the middle so a 1-7/8" ball can be added if needed.

That item is sold separately and available at etrailer.com. It also comes with this pintle lock for towing trailers that have a lunette ring. This is only to be used in conjunction with the 2-5/16" ball. If you're not using that, you can actually slide it back to a stowed position, that way you can still make your connection to a standard style coupler.That pintle lock can be completely removed. It could also be reversed and installed here on the back side of the unit for a completely stowed position. Then when it comes to making your adjustments with the hitch balls, just pull out the pin and clip, take this out, you can rotate it over to swap between the two differently sized hitch balls. Also, on the back of the shank, you'll notice multiple pin holes. You can actually take this and install it here on the reverse side of the unit for a completely stowed position. This can slide into any one of the four slots. Slide it into the slot you need, line up the pin holes, and secure it in place with the included pin and clip.The unit's also compatible with the Gen-Y Weight Distribution System, part number 325-GH-602. This product is made in the USA, and it's covered with a lifetime guaranteed warranty. A few measurements I wanna go over with you real quick. You'll notice here at the back of the shank it has two hitch pin holes. One is a 3/4" diameter pin hole. The other one is a 5/8" diameter pin hole. You would use whatever one that's gonna work best for your vehicle. From the center of the 3/4" diameter pin hole to the center of the hitch balls, we get a measurement of around 12-5/8". From the center of the 5/8" diameter pin hole to the center of the hitch balls is about 13-5/8". These are separated on center by about an inch. The overall length of this portion here is about 13" long. The overall length including the hitch balls is about 17-3/8", and the overall height from this portion here down to the bottom, so this is measuring the adjustable portion of the mount, it about 12-3/4" tall.That's gonna do it for today's look at the Gen-Y Mega Adjustable Receiver Hitch for 3" hitches.


Customer Reviews

Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 9" Drop/Rise - 32K - 325-GH-1724

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.

- 325-GH-1623
by:

Review from a similar Gen-Y Hitch Mega Stacked Receiver Drop Hitch in Ball Mounts


the product looks great. Everything was as described and it looks very durable. The color looks better in person than in the photos. 480717



- 325-GH-1623
by:

Review from a similar Gen-Y Hitch Mega Stacked Receiver Drop Hitch in Ball Mounts


I have been pulling this trailer daily for 19 years. Have been through a few hitches in that time. They all seem to bend over time. This one has just been installed and I must say it is the best quality heavy duty hitch I have ever purchased. Can't wait to pull with it... 640579



- 325-GH-1624
by:

Review from a similar Gen-Y Hitch Mega Stacked Receiver Drop Hitch in Ball Mounts


Very well made, heavy duty hitch. 605241



- 325-GH-1723
by:

Review from a similar Gen-Y Hitch Mega Stacked Receiver Drop Hitch in Ball Mounts


I am extremely happy with the hitch and lock. Both components are solid as I expected 498639


4
4

Ask the Experts about this Gen-Y Hitch Ball Mounts


  • Recommended Multipurpose Ball Mount with Receiver for 3 Inch Trailer Hitch Receiver Compatibility
  • The Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210 will work with a 3 inch receiver when you use the Curt Reducer # C45408. If you need more adjustability to tow level, then the best option is the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers for 3" Hitch - 12" Drop/Rise - 32K # 325-GH-1725 or the 9 inch drop/rise # 325-GH-1724. These assemblies offer stacked receivers that you can use bike racks or other accessories in. This...
    view full answer...

  • How to Transport a 300 lb Motorcycle While Towing an Airstream Trailer with a 2018 Ford F-350
  • I have a solution for you to get your motorcycle and Airstream trailer to your destination but a typical dual adapter like part # MT70070 wont' do the job because these have a max tongue weight of 400 lbs and since your motorcycle weighs in at 300 lbs you need an alternative option. You could potentially use a beefier option like the Gen-Y Hitch # 325-GH-1724 with an adapter # 325-GH-007 for a motorcycle carrier like # MT70101 but you would have to find a creative way to load your motorcycle...
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Cole B
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.