View Cart
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K

Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K

Item # RP45322

lowest price pledge

Retail:$103.45

Our Price: $66.47

You Save: 36%
Ball Mounts

Orders above $99 qualify for Free Shipping

Shipping Weight: 15 lbs

Quantity: 
In Stock, Ships Today
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K Fits 2-1/2 Inch Hitch RP45322
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • Fits 2-1/2 Inch Hitch
  • Fixed Ball Mount
  • Class V
  • 18000 lbs GTW
  • Drop - 3 Inch
  • Rise - 1 Inch
  • Draw-Tite
  • No Ball
  • Steel Shank
Sturdy steel ball mount with solid, 1-piece shank measures 10" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection. Call 800-298-8924 to order Draw-Tite ball mounts part number RP45322 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K. Ball Mounts reviews from real customers.


  • All Info
  • Reviews (68)
  • Q & A (23)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Ball Mounts - RP45322

Sturdy steel ball mount with solid, 1-piece shank measures 10" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Solid, 1-piece forged steel construction
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip or hitch lock sold separately


Specs:

  • Application: 2-1/2" x 2-1/2" trailer hitch receivers
  • Gross towing weight: 18,000 lbs
  • Tongue weight: 2,000 lbs
  • Length: 10" from center of hitch pin hole to center of ball hole
  • Rise: 1-1/2" from top of inside of hitch opening
  • Drop: 3" from top of inside of hitch opening
  • Ball hole diameter: 1-1/4"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


45322 Draw-Tite (Reese Titan) Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18,000 lbs





This Product Fits The Following Vehicles

2015 - 2016 Ford F-250 Super Duty

2001 - 2006 Chevrolet Suburban

2000 - 2006 GMC Yukon XL

2008 - 2010 GMC Sierra 2500 - 8 Foot Bed

2007 - 2007 GMC Sierra New Body 2500 - 8 Foot Bed

2008 - 2010 Chevrolet Silverado 2500 - 8 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 2500 - 8 Foot Bed

2003 - 2014 Dodge Ram Pickup 2500 and 3500 - with factory hitch

2001 - 2006 GMC Sierra 2500 HD - 8 Foot Bed

2007 - 2007 GMC Sierra Classic 2500 HD - 8 Foot Bed

2001 - 2006 Chevrolet Silverado 2500 HD - 8 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 2500 HD - 8 Foot Bed

2001 - 2010 GMC Sierra 3500 - Pickup

2007 - 2007 GMC Sierra Classic 3500 - Pickup

2007 - 2007 GMC Sierra New Body 3500 - Pickup

2001 - 2010 Chevrolet Silverado 3500 - Pickup

2007 - 2007 Chevrolet Silverado Classic 3500 - Pickup

2007 - 2007 Chevrolet Silverado New Body 3500 - Pickup

2016 - 2019 Ram 2500 6-1/2 Foot Bed with factory hitch

2016 - 2018 Ram 3500 6-1/2 Foot Bed with factory hitch

2016 - 2019 Ram 2500 8 Foot Bed with factory hitch

2016 - 2018 Ram 3500 8 Foot Bed with factory hitch

1996 - 2019 Chevrolet Express Van Cargo and Passenger Van

1996 - 2019 GMC Savana Van Cargo and Passenger Van

2000 - 2000 Chevrolet Suburban New Body Style with Amber Turn Signals

2005 - 2014 Ford F-250 and F-350 Super Duty Pickup

2015 - 2016 Ford F-350 Super Duty Pickup

2008 - 2015 Ford F-450 Super Duty Pickup

1999 - 2004 Ford F-250 and F-350 Super Duty Pickup - Standard or Step Bumper

2010 - 2015 Ram 3500 Pickup with factory hitch

See All Vehicle Fits


California residents: click here


Video of Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Titan Ball Mount Review - 2014 Chevrolet Silverado 2500

Today on our 2014 Chevrolet Silverado 2500, well be test fitting the Reese Titan Ball Mount for 2-1/2 inch receivers with 1-1/2 inch rise or a 3 inch drop, rated at 18,000 pounds, part number RP45322. To begin our test fit, well first get our hitch height measurement. This is the measurement from the ground to the inside top edge of our receiver tube. We have a measurement of 21 inches. Keep in mind that this measurement may vary depending on tire size, hitch style, or aftermarket accessories. Well take our ball mount and install in the drop position first.

Well slide the shank of the ball mount into the receiver tube of the hitch, line up our pin holes, and insert our pin and clip, which is sold separately. Well now take a measurement from the ground to the top of our ball platform. We get a measurement of 18 inches. When measuring your trailer height, you want to do so when your trailer is level. Youll measure from the ground to the bottom of your coupler. If your measurement matches our hitch height or the measurement in the drop position, then this will be a good fit for you.

Well flip our ball mount over the rise position and we now have a measurement from the ground to the top of our ball platform of 22-1/2 inches. Again, if your measurement matches ours, this will be a good fit for you. That completes todays test fit of the Reese Titan Ball Mount for 2-1/2 inch receivers, part number RP45322, on our 2014 Chevrolet Silverado. .


Customer Reviews

Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K - RP45322

Average Customer Rating:  4.9 out of 5 stars   (68 Customer Reviews)

Sturdy steel ball mount with solid, 1-piece shank measures 10" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.

- RP45322
by:

Very heavy duty but need ball to fit large hole for ball 511162



- RP45322
by:

Very beefy. It was going to get a receiver that had a sliding cushion, but I felt this was going to be more durable. I think it will serve me well. I was a bit disappointed that it can't be used with anti-rattle devices that Etrailer sells. I think it is a tradeoff to get a beefier receiver. I like my choice. 117457



- RP45322
by:

I have a truck with a class 5 hitch. Using the 2" to 2 1/2" adapter had a lot of play in it and this ball mount removed that play. The truck and me won't bounce around so much. Thanks for the great deal and fast shipping. Will be shopping with you again. Thanks again. 109463


Comments

The hitch is still working very good. I am still very satisfied with it. Thanks for the follow up.

Kenny K - 12/07/2014

7916

- RP45322
by:

Seems to be good quality 654358



- RP45322
by:

Your service was amazing, got my order in 2 days. Thanks 592392



- RP45322
by:

Looks great and well built. Shipping was fast and in time for towing large trailer hunting. 562212



- RP45322
by:

Fantastic rep when processing order on the phone, she knew exactly what we needed, thank you 505398



- RP45322
by:

Things was handle with not problem going to continue with etrailer for my next purchase 435242



- RP45322
by:

Supper heavy duty, very rugged, great fit in the receiver, no issues. Fit's my class V receiver very well. 404438



- RP45322
by:

Very good 376943



- RP45322
by:

Product was delivered earlier than promised! Very heavy duty, looks good quality. Very happy! Jeff Mc 112362


Comments

Patrick the ball hitch is performing very well!

Jeff M - 01/13/2015

8577

- RP45322
by:

Excellent choice of product, exceptional response, communication, and shipping, arrived early even during holidays. Price was right compared to local stores that did not even stock the one I wanted. 111143



- RP45322
by:

Great product 102127



- RP45322
by:

Obviously made for heavy towing, solid and sure fit in the receiver. Etrailer was great with communication of order, shipping with expected deliver and after delivery. 76928



- RP45322
by:

Impressive - this thing weighs a ton and has a nice thick paint or powdercoated finish. Just what I needed for my GMC 2500HD truck when pulling a 30' boat. 73862


Comments

A year later and its holding up well. No rust or any other issues. Highly recommended.

Pete F - 10/01/2014

7069

- RP45322
by:

I now have three of these for my 2011 Ford F350 with different sized balls for different trailers. They fit easily into the receiver on the Ford. 72796



- RP45322
by:

Great heavy duty ball mount! 69074



- RP45322
by:

Built like a brick outhouse, this mount is tough. Casting finish is a little rough but doesn't affect the mount. 60598



- RP45322
by:

Product fits F-250 SD 2.5 in hitch perf ectly! 59519



- RP45322
by:

2011 ford f 250 perfect fit. plus fast shipping. 47575



- RP45322
by:

Very stout and solid. Works great! 42499



- RP45322
by:

Impressive "hunk" of metal. Very close tolerance manufacture. No shims or collars required. I spent more than shipping trying to locate it locally. They all "could get it" . .. so could I. . .. [email protected] 41508



- RP45322
by:

quality parts 37463



- RP45322
by:

This thing is a beast of a ball mount. My only complaint is that its made in China. Would have much preferred something made in the U.S 32226



- RP45322
by:

Great folks to deal with. They had the product, delivered ahead of schedule and worked hard to keep me posted about the progress of the order. 30849



- RP45322
by:

Exactly what I was looking for. 29232



- RP45322
by:

what a hitch!! delivery was fast. hitch is super heavy duty. 29100



- RP45322
by:

Nice ball mount. Very HD. Excellent service and fast delivery. 28625



- RP45322
by:

Heavy duty and great quality. Never seen anything close to this in any brick and mortar store. Fits the class IV factory receiver on my 2011 Chevy truck like a glove. 28420



- RP45322
by:

I needed heavy duty and got it. 21802



- RP45322
by:

Product was just as stated. Sturdy ball mount with a lot of weight bearing capacity. 15527



- RP45322
by:

Solid chunk of metal! 10571



- RP45322
by:

seems to be what I wanted 9767



- RP45322
by:

Great products. Great quality. I always find everything I need at etrailer.com. You can call and their friendly staff can always help find what you need.I order all my parts from here. Love it. 8954



- RP45322
by:

Very heavy duty and extremely well made. 8796



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


No issues. Very solid mount. All the towing gear that I've bought recently I've gotten from etrailer.com, and I'm very pleased. Lots of good info on the site, great selection, prompt shipping, and they seem genuinely interested in making sure what they sell does what you need it to do. 249471



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


The Titan Ball Mount was exactly what I needed to get the right drop to level my car hauler. I shopped local auto supply stores and similar ball mounts were $20 more and needed to be "special ordered". Ordering online was easy and the product videos were great! 221910



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Ball mount for class V receivers... It leveled out my trailer and does the job without using 2" to 2-1/2" adapters... 459580



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Pleased with the drop hitch and both the 2" and the 2 5/16" ball. Will be using the bigger ball to move my travel trailer in the drive way. I've ordered from etrailer in the past and always satisfied with the products, as well as the customer service. 442027



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Etrailer was the only online distributor that had exactly the hitch I needed for my application. Shipping was quite expeditious and most importantly the hitch fits and functions exactly as I wanted. Would certainly do business with Etrailer again. 182770



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Looks well built. Good welds. Heavy construction. Fit well in 2017 Ram 3500 factory receiver. Pin hole lined up perfectly. Pulled a 17' bass boat around for a couple of hours. No clunking or rattling. For a fixed-height class 5 hitch, you can't do much better. Great price & prompt delivery, as usual. 398682



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


A great, strong hitch. I use it being my lifted F-350 and have had no problems with anything I hook up behind my truck! 400270



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Great product from a wonderful supplier. 672922



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


As with previous orders, this one arrived quickly and well packaged. All items are top quality and I’m sure will perform as advertised. etrailer is the only place I turn to for trailer/towing equipment & supplies. Prices are good, employees are helpful and shipping is prompt! 671644



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Excellent! I will be able to haul my two axle heavy trailer with confidence. 663968



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Tried using a cheap 2" from a box store and the reducing sleeve that came with my truck. I ended up having way to much slop and movement with that setup. The 2 1/2" has a much tighter fit and doesnt clunk around every start and stop. Great product. 659958



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Thank you!! 612658



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


product as described and it arrived in 2 days. 597492



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Easy process to find and order 596520



- 45291
by:

Review from a similar Draw-Tite Titan Drop Hitch in Ball Mounts


Service was excellent. 596277


50
68
Show More Reviews

Ask the Experts about this Draw-Tite Ball Mounts
Do you have a question about this Ball Mount?


  • Reese Trailer Hitch # 45297 Recommendation for a 2002 Ford F-350
  • I would recommend the Reese Trailer Hitch, part # DT45508, for your 2002 Ford F-350 Super Duty. This hitch will fit with the factory spare tire and will be able to tow up to 18,000 lbs of gross trailer weight. I attached installation instructions for this hitch. You may be interested in purchasing a Reese Titan Ball Mount for 2-1/2 inch Receivers, part # RP45322, a Hitch Ball with 2 inch Diameter and Medium Shank, part # A-90, and a Hitch Ball with 2-5/16 inch Diameter and Medium...
    view full answer...

  • Weight Capacity of Curt Class V 2-1/2 Inch Hitch Receiver, Part # C15810
  • You are correct that the product description for the Curt Class V 2-1/2 Inch Hitch Receiver, Part # C15810, shows the same tongue weight and gross towing weight ratings with and without weight distribution. This is because unlike lower capacity hitches, say a Class III, this Class V hitch is already rated at or near the vehicle structural limits. Strictly speaking, adding a weight distribution setup would give this hitch receiver higher capacity, but it would serve no purpose. Unless...
    view full answer...

  • Will the Use of a 2-1/2 Inch to 2 inch Trailer Hitch Reducer Sleeve Reduce the Hitch Capacity
  • You have a couple of options. The best thing to do would be to use a ball mount that fits in your hitch. The reason is that you will not have to worry about a reducer sleeve fitting, any capacity reduction, or adding another component in the system. For 2-1/2 inch receivers we have # RP45322, or # RP45323 for an 18,000 pound fixed ball mount. The other option is to use a reducer, # 58102. The hitch capacity should not be dramatically changed so if it is rated to tow the 13,000 pounds...
    view full answer...

  • How to Determine Tongue Weight of an 18,000 Pound Trailer
  • Tongue weight is typically 10 to 15 percent of the gross trailer weight. However there are several trailers that do not follow this rule; such as toy haulers as one example, which can be as much as 20 percent or so of the gross trailer weight. If your trailer weighs 18,000 pounds when loaded and ready to tow then 10 to 15 percent would be 1,800 to 2,700 pounds. If your tongue weight is actually 6,000 pounds then that would mean it is about 33 percent of the gross trailer weight. This...
    view full answer...

  • What Comes with the etrailer.com Ball Mount Kit for 2-1/2 inch Hitches
  • The difference between what comes with the etrailer.com Ball Mount Kit # EBMK25318 and the Reese Titan Ball Mount # RP45322 is that the # EBMK25318 comes with a # RP45322 plus a hitch ball # 63840 and ball mount bag # ETBMB. So basically if all you wanted was a ball mount you would want the # RP45322, but if you wanted that plus a hitch ball and a ball mount bag you would want to get a # ETBMB25318. The ball mount has a distance of 10 inches from the center of the hitch pin hole to...
    view full answer...

  • Ball Mount Like Hidden Hitch Super Extra Long # 80232 Needed for Class V Hitch
  • The closest that I have to offer for a Class V hitch would be the Reese Titan Ball Mount, # RP45322, which can provide a 1-1/2 inch rise or 3 inch drop and measures 10 inches from the center of the hitch pin hole to the center of the ball hole. I have included a link to all of the fixed ball mounts that will work with a Class V 2-1/2 inch hitch for you.
    view full answer...

  • Recommended Trailer Hitch To Tow 2 Horse Trailer with 2004 Dodge Ram Truck
  • With the trailer load you will be carrying, using the Curt Trailer Hitch Receiver, part # 13333, would put you near or slightly over the tongue weight capacity of the hitch, which is 600 lbs. If you were to use a weight distribution system when carrying your horse trailer you would be ok to use the Curt # 13333 Hitch. Tongue weight is calculated to be about 10 to 15 percent of the Gross Trailer Weight. I would recommend using the Curt Class V Trailer Hitch, part # C15409. This hitch...
    view full answer...

  • Ball Mount Recommendation for a 2014 Ford F250 with 2-1/2 inch Hitch
  • Originally, because the radius at the inside corners of the Ford OEM hitches were more rounded than usual, getting aftermarket hitch accessories that would fit was a problem. Ballmounts could be altered to fit by sanding off the powder coat at the corners. In the meanwhile, Reese has altered the design of the ball mount slightly by rounding the shank edges so that it will be compatible with the Ford OEM 2-1/2 inch receivers. I have confirmed this with Reese. The # RP45322 ballmount...
    view full answer...

  • Will the Curt Class V # C15809 Fit 2006 Dodge Ram 2500 Mega Cab
  • The Curt Class V Receiver you referenced, part # C15809 is a fit for your 2006 Ram 2500 Mega Cab. The hitch is designed to fit below the OEM hitch (if present) and will not fit Hemi Sport Quad Cab and SRT-10 models. You might also need the following: Wiring harness, part # 118381 Ball mount, part # RP45322 2 inch trailer ball, part # A-90 2-5/16 inch trailer ball, part # 19286 To see the install instructions, click on the provided link.
    view full answer...

  • Will the Titan Reducer Sleeve for 2-1/2 inch Hitches Fit on My 2010 Chevrolet Silverado 2500
  • I went out to the warehouse an pulled the Titan Reducer Sleeve 2-1/2 inch to 2 inch, and measured the inside dimension of the one I pulled at 2.068 inches with a dial caliper, I also measured the outer dimension at 2.469 inches, see attached photos I took for you. You mentioned tolerance, and that is an unknown factor. All hitch manufacturers and hitch accessory manufacturers have to stay within certain guidelines, to ensure that their product will work with other accessories on the...
    view full answer...

  • Trailer Hitch Extension for 2009 GMC Sierra with 2-1/2 Inch Hitch Towing a Boat with In-bed Camper
  • First, the Ford 2-1/2 inch hitch has be known to have some compatibility issues with some accessories. The problem is that the hitch receiver has more rounded corners than a lot of accessories that have more square corners. In the event you run into this issue, what you can do is gently and carefully remove some of the powder coating around the accessory shank until it fits. Do not remove any metal. This will weaken the accessory. The extension length you need is going to be based...
    view full answer...

  • Hitch Ball And Pin Recommendation For 2-1/2 Inch Receiver On 2013 Chevrolet Silverado 2500HD
  • If you have a 2-1/2 inch receiver on your 2013 Chevrolet Silverado 2500HD the 2 inch ball I recommend is the CURT Hitch Ball, part # A-90. This hitch ball has a shank diameter of 1-1/4 inches and the length of the shank is 2-5/8 inches. The Reese Titan Ball Mount, part # RP45322, you referenced has a ball mount that is 1 inch thick so this hitch ball will work fine with the ball mount. The pin I recommend for a 2-1/2 inch receiver is part # C21500. This is a 5/8 inch diameter pin and...
    view full answer...

  • Availability of a 12 inch or Longer Ball Mount to Clear Open Tailgate of 2011 GMC Sierra
  • I have a solution that'd get you the ball mount length you're needing. First, you'd need to use a reducer, part # 58102 to convert your 2-1/2 inch receiver down to a 2 inch. Then, you'd use a ball mount like the # BH20 from CR Brophy. The # BH20 offers a 2 inch drop (we don't have anything in a 3 inch drop) and a hitch pin hole to ball mounting hole distance of 13-1/4 inches. For a 2 inch ball, you'd use part # A-90. As long as you have the trailer ball within 1 to 1-1/2 inches of level,...
    view full answer...

  • Will Curt Trailer Hitch Receiver # C15409 Fit 2006 Dodge 2500 Mega Cab With OEM Hitch
  • The hitch you have referenced, Curt Class V Trailer Hitch Receiver, part # C15409, is a 2 inch receiver, and can be installed along with an OEM receiver, on your Dodge Ram 3500. The towing capacity for this hitch is 17000 lbs, and it also has a tongue weight capacity of 2550 lbs. No ball mount, clip or pin is included, so I would recommend Draw-Tite Ball Mount, part # 40330. I would also recommend Pin and Clip, part # PC3. For a 2-inch hitch ball, I would recommend part # A-90. It has a...
    view full answer...

  • Curt Trailer Hitch # C15409 Recommendation for a 2007 Dodge Ram 3500 4x4 8 Ft Bed
  • This Curt Trailer Hitch Receiver, part # C15409, is a confirmed fit for your 2007 Dodge Ram 3500 dually and would work very well for you. I attached installation instructions for this product for you to check out also. You may be interested in the following products to complete your towing setup: Reese Titan Ball Mount for 2-1/2 inch Receivers, part # RP45322 Hitch Ball with 2 inch Diameter and Medium Shank, part # A-90 Trailer Hitch Ball with 2-5/16 inch Diameter and Medium Shank,...
    view full answer...

  • Recommendation for Removing Rattle from a Ball Mount on a 2011 Ford F350
  • What you could get to help with the rattle is an anti-rattle device such as the Roadmaster Quiet Hitch # RM-061. This product basically will pin the ball mount to the hitch opening and will prevent all the rattle and noise you are trying to get rid of. Check out the review video I attached for this product also. The Reese Titan Ball Mount # RP45322 you referenced is not designed to fit in 2 inch hitches and would not work for you at all so I would not recommend it for you.
    view full answer...

  • Fit of Reese Titan 2½ Inch Ball Mount on OEM Class V Receiver of 2013 Ford Super Duty
  • Originally, because the radius at the inside corners of the Ford OEM hitches were more rounded than usual, getting aftermarket hitch accessories that would fit was a problem. Ballmounts could be altered to fit by sanding off the powder coat at the corners. In the meanwhile, Reese has altered the design of the ball mount slightly by rounding the shank edges so that it will be compatible with the Ford OEM 2-1/2 inch receivers. I have confirmed this with Reese. The # RP45322 ballmount...
    view full answer...

  • Ball Mount with 2-1/2 Inch Shank to Fit the Factory 2-1/2 Inch Trailer Hitch on a 2009 Ford F-350
  • The Reese Titan accessories used to have more squared edges and the Ford Super Duty 2-1/2 inch receiver requires something with more rounded edges like # AMSCV-2. It still may be a tight fit and in those cases, usually if you remove some of the powder coat from the ball mount shank (not any of the metal) you can get those snug accessories to fit properly. But we have had confirmation from a customer with a 2011 Ford Super Duty that it does fit his 2-1/2 inch receiver.
    view full answer...

  • Recommendation for a Class V Trailer Hitch that Will Fit a 2007 Dodge Ram with Factory Trailer Hitch
  • We do have several trailer hitches that are designed to fit beneath the factory trailer hitch on a 2007 Dodge Ram. You can use Curt Trailer Hitch # C15704 if you want a 2-1/2 inch trailer hitch receiver. Hitch # C15409 has a 2 inch receiver. The recommended ball mount for a 2-1/2 inch hitch is # RP45322, and you can use pin and clip # 74149. For a ball you can use # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, if your truck has a tow package with a 7-Way...
    view full answer...

  • How to Use Friction Sway Control Unit on Pickup with 2-1/2-Inch Hitch
  • The Reese # RP45322 ball mount fits 2-1/2-inch hitch receivers. We do offer add-on sway control brackets for 2-inch and 1-1/4-inch ball mounts, parts # RP26003 and # RP26005, that fit right over a ball mount and that are held in place with the hitch ball. We do not offer one of these to fit a 2-1/2-inch ball mount, however. But we do have a weld-on Sway Control Tab # 3442 that you can weld to your ball mount. Another option is to user a hitch reducer sleeve # 58102 to convert your 2-1/2-inch...
    view full answer...

  • What are the Tow Capacities fo Reese Titan Ball Mount RP45322
  • The Reese Titan Ball Mount has a maximum tongue weight, or hitch weight, of 2,000 pounds. The maximum gross towing weight is 18,000 pounds.
    view full answer...

  • Can I Use Curt Trailer Hitch Receiver # C15409 Same Time as the OEM Hitch on 2010 Dodge Ram 3500
  • The hitch you have referenced, Curt Class V Trailer Hitch Receiver, part # C15809, is a 2-1/2 inch receiver, and can be installed along with an OEM receiver, on your 2010 Dodge Ram 3500. The towing capacity for this hitch is 20000 lbs, and it also has a tongue weight capacity of 2700 lbs. For this receiver I would recommend the Reese Ball mount, Part # RP45322. It has a towing capacity of 18000 lbs. I would also recommend Hitch ball, part # 63840, which has a towing capacity of 20000...
    view full answer...

  • Can a 2 Inch Ball be Included in a Ball Mount Kit Instead of a 2-5/16 Inch Ball
  • What you can do is get the parts individually since we can't swap the balls out in a kit. The ball mount is # RP45322 and the bag is # ETBMB. For a 2 inch ball that will fit use # A-90. But keep in mind that the ball is rated for 10,000 pounds which is less than the ball mount which is rated for 18,000 pounds gross trailer weight and 2,000 pounds tongue weight.
    view full answer...


Do you have a question about this Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Adele M
Expert Research:
Brandon M
Updated by:
Laura H
Test Fit:
Cole B
Expert Research:
Jeffrey L
Photos by:
Zach O
Updated by:
Alexander C
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924