Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K

Item # 36051

lowest price pledge

Retail:$40.11

Our Price: $16.87

You Save: 58%
Ball Mounts

Orders above $50 qualify for Free Shipping

Shipping Weight: 5 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
36051 - Drop - 1 Inch,Rise - 1 Inch Draw-Tite Ball Mounts
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Call 800-298-8924 to order Draw-Tite ball mounts part number 36051 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K. Ball Mounts reviews from real customers.
  • All Info
  • Reviews (67)
  • Q & A (86)
  • Videos (1)
  • Photos
  • Used (1)
  • Why etrailer?

Draw-Tite Ball Mounts - 36051

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Class II
  • 3500 lbs GTW
  • Drop - 1 Inch
  • Rise - 1 Inch
  • Draw-Tite
  • No Ball
  • Steel Shank

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 7" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Drop: 1-1/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


36051 Draw-Tite Class II Ball Mount - 5/8" Rise or 1-1/4" Drop - 3,500 lbs

Replaces 90001






California residents: click here


Video of Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Draw-Tite Ball Mounts - Fixed Ball Mount - 36051 Review

Today well be reviewing part number 36051. This is the Draw Tite Class II drawbar with a 5/8th inch rise or 1 and inch drop. Its rated at 3500 pounds with a gross trailer weight and up to 300 pounds when it comes to the maximum towing weight capacity. What you would do is you would slide the shank of your mount into the receiver tube of your hitch and line up your pin hole. Then you would secure it by using the included hitch pin and clip, so that product is included. This is going to use a ball with a inch shank diameter. We have about inches of diameter here at our hitch ball hole.

The overall length of our mount is about 10 and a half inches and the distance from the center of the hitch pin hole to the center of our ball hole measures 7 inches. From the hitch pin hole to the back of the mount, we have a measurement of about 1 and 7/8th of an inch. With this installed in the drop position, youre going to have a maximum drop of 1 and a quarter inch and then if you have this installed in the rise position, its going to give you a rise of 5/8th of an inch.Thats going to complete todays review of part number 36051. Thats the Draw Tite Class II drawbar, with a 5/8th inch rise or 1 and inch drop, rated at 3500 pounds. .


Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K - 36051

Average Customer Rating:  4.8 out of 5 stars   (67 Customer Reviews)

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

- 36051
by:

Product was as described. Arrived very quickly. Hitch was way heavier than I expected. Very well made from heavy material. Fit perfect on the back of my Cub Cadet Challenger 750 Crew. Thanks for a great product. 613221



- 36051
by:

They are very good trailer products I like them and they’ve served me very well. I would be a repeat customer and recommend etrailer to my friends. 523763



- 36051
by:

Easy website to navigate. Found the hitch for our bike rack quickly, and the ordering process was simple. Received my items expediciously too. Will be back for more when needed. Very competitive pricing, too. 413556



- 36051
by:

Got the draw bar in 2 days like I was supposed to but due to circumstances I don't have my Subaru to try it on just yet, but I am sure it will fit. 215711



- 36051
by:

I received exactly what I ordered when I expected it and the pricing was super competitive. The drawbar fits my Gator perfect. Great online shopping experience. I Highly recommend Etrailer.com. 683631



- 36051
by:

This is an average product. Unfortunately it si too short to use on my 2018 Rogue with Draw-Tite hitch 36542. I will have purchase a longer ball mount such as Curt 45519. 682821


Comments

Another drawbar option, and the one recommended for this hitch in the installation instructions, is # 36053
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
$19.85
. I have linked it here for your convenience.

-- Victoria B - 08/13/2019

58983

- 36051
by:

performed exactly as billed! Thank you! 672863



- 36051
by:

Used it to go from NY to NO and it worked well. 651968



- 36051
by:

The Convert-A-Ball is made in USA, appears to be high quality and just what I was looking for. The Draw Bar however was made in China The Convert-A-Ball appears to be high quality, made in USA and just what I was looking for. I needed a Draw-Bar to fit 1 1/4" receiver and with 1" shank hole, but nearest I could find was this Draw-Bar with 3/4" hole, so will have to drill out this one. Also was made in China, which I try to avoid although the quality appears to be good. Wish I had known that the Draw-Bar came with its own Pin & Clip so I wouldn't have ordered that separately, so now I have 2. This why I gave only 4 stars. Otherwise am happy with the order. 646951



- 36051
by:

All parts fit as required. Only problem was the instruction for the hitch was for a different auto. It was simple enough to install with the install video. Good product. 639317



- 36051
by:

what I expect ordering from e-trailer 629801



- 36051
by:

Product came in a timely manner, just what I wanted. 620080



- 36051
by:

Thanks for all the much needed info I n eeded. 605688



- 36051
by:

Just what I needed for my Honda. 589670



- 36051
by:

Fits well with the Drawtite class 2 hitch and places tongue for my 1/2 utility trailer level. 550489



- 36051
by:

fit perfectly, easy to install 546606



- 36051
by:

Did what's it's supposed to do. 513151



- 36051
by:

Works great. Good construction. 504900



- 36051
by:

Fits perfect, thou I'm Leary of the cotter pin used to secure it. Will swap this out for a proper rated bolt. 499036



- 36051
by:

The product arrived quickly, fit perfectly, and was easy to install. I'm very happy with my purchase. 498455



- 36051
by:

They had what I needed at a reasonable price and delivered it quickly. What's not to love? 494565



- 36051
by:

The hitch is perfect. Just what I neede d. 469022



- 36051
by:

Perfect fit, well made 461864



- 36051
by:

Fits the hitch I bought, pulls stuff 455678



- 36051
by:

Great well made draw bar.Everything I have ordered from etrailor works as its suppose to and arrives in 3 to 4 days.The staff is very helpful with any questions you you may have. 444324



- 36051
by:

Solid, well-engineered, and value-priced 441253



- 36051
by:

Product arrived within three days and was the correct size I needed. Quality is good. All my hitches have had 4" bars but this one needs a 2" bar. 436996



- 36051
by:

I like my Draw-Tite hitch and the second ball mount I just purchased so I can switch between 1 7/8" and 2" balls easily. Purchase and delivery through etrailer was effortless. I'm a happy customer. 414455



- 36051
by:

Arrived quickly and everything was included. Second order I have made with you and both were great. 408217



- 36051
by:

As order. 393036



- 36051
by:

I also purchased a receiver hitch for a Subaru Outback. Everything arrived in good shape and promptly at a good price. 388661



- 36051
by:

This is the 2nd hitch package I've bought from etrailer.com. (The first was for a 2011 Outback, and this one was for a 2017 Outback.) And like the first, this order was handled perfectly by the etrailer rep. The hitch and drawbar arrived as promised and I had my mechanic install it yesterday. He said it was a fairly simple job (took him less than an hour) and the new wiring harness simply plugged in to the existing harness in the 2017 Outback (as opposed to having to be spliced in the 2011 Outback with the first hitch package). Also the price was very good... more competitive than buying it from, and having it installed by, a local dealer. All in all, it was a painless and pleasant experience. I will definitely buy my next hitch from etrailer when it's time to replace my 2017 Outback. 378659



- 36051
by:

JUST WHAT I ORDERED 363082


Comments

STILL USING :

BOB W - 04/05/2018

36942

- 36051
by:

Well made easy to use and assemble 344970


Comments

Very well

William C - 02/24/2018

35101

- 36051
by:

Your company has a well planned procedure from e-order to completion. There is no gap anywhere from ordering to shipping to follow up. The videos are excellent in showing the way. It is 100% satisfaction for me. It all worked out just fine. 343728



- 36051
by:

Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping. 340945



- 36051
by:

Received my item very quickly, was packaged nicely. Would definitely recommend etrailer.com and purchase from them again. 303485



- 36051
by:

Good item. 301553



- 36051
by:

Perfect fit just what I was looking for to pull my Bushtec trailer. 293096



- 36051
by:

AAA+++ packaging and shipping time 292574



- 36051
by:

Not much to say. It is strong and does the job. 273627



- 36051
by:

Unit has worked well and held up. I only removed it once and that was for a week to travel for vacation. The paint is still like new, no rust can be seen. Unit creates no noise while driving with or without a trailer attached, not like a former hitch I had. 260022



- 36051
by:

It is doing its job 253110



- 36051
by:

I hooked up the draw bar today for the first time to the trailer that I built and the hitch I installed. The draw bar uses a cotter pin that slides on the bolt rather than going through a hole to mount the bar to the hitch. I have never used a sliding on pin in anything - I've only used those that go through a small hole matching the pin. This includes my farm tractor and other tools. I hope it is secure because it does slide on easily. The bar itself appears nice and strong. 230017


Comments

I am still happy with the items. However, I have not used them much over the past few months. But, they will get much more use in a couple of weeks. I am putting the finishing touches on a camper that I have been building for half a year.thanks,

Lee - 10/25/2016

21627

- 36051
by:

Exactly what I ordered, and it arrived on time! 201979



- 36051
by:

A good price for a quality drawbar. It looks a good as any I've seen in the local stores. 194359



- 36051
by:

Product fit my vehicle and shipped fast. 193239



- 36051
by:

Perfect for my equinox. Arrived in two days. 189578



- 36051
by:

good product, good quality. on time del ivery 186244



- 36051
by:

got my hitch today everything was in the box. I liked the web site it was easy to use . the installation videos are very helpful ,and it was easy to find the hitch for my car . Thanks Great Job. Mike H 167579


50
67
Show More Reviews

Ask the Experts about this Draw-Tite Ball Mounts

Do you have a question about this Ball Mount?


  • Towing Capacity of 2014 Honda CR-V
  • According to Honda the towing capacity for your 2014 Honda CR-V is 1,500 lbs. As long as your trailer is not over 1,500 lb when loaded you'd be totally fine. The Draw Tite hitch part # 36520 that you referenced is a confirmed fit for your vehicle though and would be a great option for a hitch. For a ball mount then you'd need the part # 36051 and for a hitch ball # 19258 for a 2 inch size and part # 19256 for a 1-7/8 inch size. For trailer wiring you'd then want the T-One kit part #...
    view full answer...

  • Ball Mount With 1-1/4 Inch Drop That Fits 1-1/4 Inch Trailer Hitch
  • For a ball mount (draw bar) with a 1-1/4" drop that fits into a 1-1/4" trailer hitch you need the Draw-Tite # 36051, which has a 300 lb tongue weight capacity, 3,500 lb towing capacity and is only compatible with Class II 1-1/4" hitches. This ball mount includes a pin and clip but for a 2" hitch ball you need # 19258.
    view full answer...

  • Is Draw Tite Trailer Hitch Really No Drill on 2018 Subaru Crosstrek?
  • I can happily confirm for you that the Draw-Tite Trailer Hitch # 36644 is truly a no-drill install on your 2018 Subaru Crosstrek; it is a bolt-on installation and you will only need to lower your exhaust temporarily in order to install the hitch. For wiring which will allow you to power your trailer's lights you need Wiring Harness # 118467 which will give you a 4-flat connector. If you are going to be towing, the recommended ball mount is the Draw-Tite # 36051, for which you'd need...
    view full answer...

  • Trailer Hitch Recommendation for 2018 Volkswagen Tiguan
  • The Draw Tite Class II hitch part # 76192 is a confirmed fit for your 2018 Volkswagen Tiguan and would be a great option. It has a 3,500 lb trailer towing capacity as well. For a ball mount you'd want the part # 36051, hitch ball # 19258 for a 2 inch ball or part # 19256 for 1-7/8 inch ball. For trailer wiring you'd then want the part # 119190KIT which is a confirmed fit.
    view full answer...

  • Is There a Recommended Drawbar for 1-1/4" Draw-Tite Trailer Hitch on 2019 Subaru Crosstrek
  • Thank you for all of the information! Essentially you can use almost any drawbar that has a 1-1/4" shank for your application but Draw-Tite does recommend using the Drawbar # 36051 for the Trailer Hitch Receiver # 36644 on your 2019 Subaru Crosstrek. This has a 5/8" rise/1-1/4" drop and is compatible with hitch balls that have a 3/4" shank like the 1-7/8" # 19256 or the 2" # 19258. I have attached a link to a helpful article showing you how to determine is the rise/drop of this drawbar...
    view full answer...

  • Trailer Hitch Recommendations for 2003 Subaru Forester
  • The vehicle and the structure under the car where the hitch attaches wouldn't be strong enough to withstand towing a Class III rated trailer, which is why a Class III hitch isn't available for your vehicle. None of our hitch manufacturers offer a Class III option for your 2003 Forester. The Draw-Tite Class II hitch, part # 36311 is a reasonably priced solution. For a trailer wiring harness, use part # 118461. You'll also need a ball mount like # 36051, but you will want to measure your...
    view full answer...

  • Recommended Hitch Receiver Compatible with 2016 and 2017 Toyota Sienna
  • We offer several options that fit both the 2016 and 2017 Toyota Sienna. You have the choice between a Class II hitch and a Class III hitch for these vehicles. Class III hitches have a greater weight capacity and can tow a wider variety of vehicles. If you plan on towing heavier loads at any point, I recommend going with a Class III hitch. I've attached a helpful article on trailer hitch classes for you to check out. Please note that your towing capabilities will still be limited by the...
    view full answer...

  • 2015 Toyota Sienna Se Trailer Hitch Recommendation for Ground Clearance
  • The rear of your 2015 Toyota Sienna does sit pretty low. For a trailer hitch for your vehicle the best option is going to be the smaller 1-1/4 inch trailer hitch size like the part # 36513 as it will offer slightly better ground clearance than a 2 inch hitch. For a ball mount you would need the part # 36051, 2 inch hitch ball # 19258 or 1-7/8 inch ball # 19256. For trailer wiring you would then want the # 118498.
    view full answer...

  • Comparison Between Hidden Hitch # 90089 and Draw-Tite # 36520 for 2014 Honda CR-V
  • Draw-Tite and Hidden Hitch are both sister companies that are owned by the same parent company, Cequent Performance Products. Both hitches are identical. The hitches share the same weight capacity, installation would be the same and the quality would be equal. If you'll be using the hitch for towing, you'll need the ball mount, part # 36051. You'll also need the trailer wiring harness, part # 118561 and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball, part # 19258. I've provided...
    view full answer...

  • Modifications Needed for 2014 Chrysler 300S To Install Class II Trailer Hitch
  • According to the installation instructions for the Draw-Tite Class II trailer hitch, part # 36548, there is no cutting or modification if the bumper fascia required (see linked instructions). However, on 2011 and newer vehicles, there's a plastic appearance panel under the vehicle that would need to be removed and left off the vehicle. There is a trailer wiring harness available, part # C56145. If you'll be towing with this hitch, you'll need a ball mount like # 36051 but remember to...
    view full answer...

  • Trailer Hitch and Wiring for a 2007 Ford Escape Hybrid
  • Yes, Draw-Tite trailer hitch # 36501 fits all models of the 2007 Ford Escape including your hybrid. I have linked a video showing an example installation of this hitch for you. I checked the owner's manual online for the 2007 Ford Escape hybrid and found that it has a towing capacity of 1,000 pounds. If you plan on towing the recommended ball mount is # 36051. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And to add a 4-Way flat trailer connector to the rear of...
    view full answer...

  • Anti-Rattle Device Recommendation for Ball Mount # 36051
  • You'd need an anti-rattle device like the part # RM-061-125 to remove the movement you have of the # 36051 in the hitch you have. This will hold the ball mount tight to the hitch and remove all movement.
    view full answer...

  • Trailer Hitch Recommendation for a 2007 Jeep Commander Rocky Mountain Edition
  • I spoke with my contact at Draw-Tite about Trailer Hitch # 36362. He stated that there are no known fit problems with this hitch and the Jeep Commander Rocky Mountain Edition. He also added that they have not received any calls about the hitch not fitting. So the # 36362 hitch will fit your Grand Cherokee. I have included a link to the installation details to the right. The hitch comes with the necessary hardware for installation. If you plan on doing some towing the recommended ball...
    view full answer...

  • Recommended Bolt On Trailer Hitch Receiver with 1-1/4 Inch Opening for 2018 Subaru Crosstrek
  • The Draw-Tite Trailer Hitch Receiver - 1-1/4" # 36644 is a confirmed fit for your 2018 Subaru Crosstrek. It requires no drilling for installation and is an easy bolt on application. If you will be doing light towing with this hitch, I recommend the Draw-Tite Ball mount # 36051 which comes with the pin and clip. Then you will need a hitch ball like # 19256 for a 1-7/8 inch diameter ball or # 19258 for a 2 inch ball. For your trailer wiring harness, I recommend the T-One Vehicle Wiring...
    view full answer...

  • Tow Ready Custom Fit Vehicle Wiring # 118425 Recommendation for a 2008 Jeep Grand Cherokee
  • For trailer wiring you would want a Tow Ready Custom Fit Vehicle Wiring, part # 118425, as this Draw-Tite Trailer Hitch Receiver, part # 36362, does not include a wiring harness for your 2008 Jeep Grand Cherokee Loredo V6. I attached installation instructions and video for you to check out also. I attached installation instructions for the Draw-Tite Trailer Hitch Receiver, part # 36362, also. You may be also interested in the following items to complete your towing setup: Class...
    view full answer...

  • Trailer Hitch and Wiring Recommendations/Comparisons for a 2006 Subaru Forester
  • For the 2006 Subaru Forester there are only Class II hitches with 1-1/4 inch receivers available. The Draw-Tite hitch # 36311 and Curt hitch # C12038 are both rated for 3,500 pounds gross trailer weight. The Curt hitch is rated for 350 pounds tongue weight and the Draw-Tite is rated for 300 pounds tongue weight. These capacities are greater than what the vehicle is capable of though. According to the owner's manual if the trailer has brakes then the vehicle can tow 2,400 pounds gross...
    view full answer...

  • Recommended Class II Trailer Hitch for Towing Small Utility Trailer w/ 2008 Subaru Forester
  • The Curt Class II trailer hitch you referenced, part # C12038 has a 3500 lb towing/350 lb tongue weight capacity. If you'll only be using the hitch for towing a trailer, it should work just fine for you. However, if you're wanting to use the hitch as an attachment point for other hitch mounted accessories like a cargo carrier or a bike rack, it wouldn't be the best choice. Curt's warranty requirement state that all non-trailer loads need to use a stabilizing strap, like part # 18050. The...
    view full answer...

  • What is the Recommended Ball Mount for a 2013 Subaru Outback Wagon
  • You will not want to drill any holes in the ball mount shank or the hitch itself. This will void the warranty and it can weaken the metal and make the capacity unknown. The best thing you can do is get a ball mount that has the length you need. There is no set length it has to be. Provided that it clears the rear of the vehicle and is not excessively extended (varies depending on the vehicle, hitch, and tongue weight of trailer) you can use a 14 inch long ball mount. For the Class III...
    view full answer...

  • Trailer Hitch for 2002 Toyota Avalon to Tow Dirt Bike
  • I took a look at the owner's manual for your 2002 Toyota Avalon and this vehicle has a maximum towing capacity of 2,000 lbs and a tongue weight capacity of 200 lbs. So while you could use the Draw-Tite trailer hitch # 36293 you would need to tow your dirt bike on a trailer because your bike's 350 lb weight combined with a bike carrier would be more than double the tongue weight capacity of your Avalon. Along with a hitch you would also need to add a 4-way connector to power your trailer's...
    view full answer...

  • Recommended Anti-Rattle Hitch Pin for Solid Drawbar
  • Even though the Draw Tite Class II drawbar, # 36051, has a solid shank you can still use an anti-rattle device with a solid shank accessory. I recommend the No-Rattle Trailer Hitch Wedge, # 93347. I have included a video review of this anti-rattle device below.
    view full answer...

  • Hitch, Drawbar, Hitch Ball, and Safety Chains Needed to Tow a Trailer
  • For your 2001 Kia Sportage, in addition to hitch # 36266, and wiring # HM43915, you will need a ball mount and a ball for the coupler on the trailer. You will also need safety chains unless the trailer comes with them. For a 1-1/4 inch by 1-1/4 inch opening, like the Draw-Tite Trailer Hitch, # 36266, use Class II Drawbar, # 36051. With this ball mount, use Hitch Ball, # 19256. To secure and lock the drawbar in place, use the Trailer Hitch Receiver Lock, # e98879. For safety chains,...
    view full answer...

  • Recommended Towing Package For 2011 Kia Sorento 4 Cylinder
  • If your 2011 Kia Sorento does not have the dual exhaust system with a tailpipe on both the driver and passenger side, I recommend the Draw-Tite Class ll Hitch, part # 36511. This hitch has a 1-1/4 inch receiver opening. I have attached an installation video for this hitch on a Sorento you can check out. You may be interested in a Draw-Tite Ball Mount like part # 36051. This drawbar provides a 5/8 inch rise or a 1-1/4 inch drop and measures 7 inches from the center of the hitch pin hole...
    view full answer...

  • Towing Capacity of 4 Cylinder 2012 Chevy Equinox and Parts Needed to Tow
  • I checked the owner's manual for a 2012 Chevy Equinox and found that the 4 cylinder models have a 1,500 pound towing capacity if the trailer has brakes. If the trailer does not have brakes it is limited to 1,000 pounds gross trailer weight. So it can tow provided that the gross trailer weight capacity is within the capacities listed above. Draw-Tite trailer hitch # 36408 is a great choice for your Equinox but it is limited to the capacity of the vehicle. I have linked a video showing...
    view full answer...

  • Trailer Hitch and Wiring Recommendations for a 2016 GMC Terrain
  • Between the Curt hitch # C12291 and Draw-Tite hitch # 36408 both hitches are positioned the same on the 2016 GMC Terrain. Take a look at the picture I have included showing the hitches installed. The receiver locations are identical and the crosstubes and mounting brackets are hidden behind the fascia/bumper. If it were me I would use Draw-Tite trailer hitch # 36408 if carrying bikes or cargo. The reason is that the Curt hitch requires the use of stabilization strap # 18050 when using...
    view full answer...

  • Does The Draw-Tite Trailer Hitch, # 36293, Include A Ball Mount For A Toyota Avalon
  • On the Draw-Tite Trailer Hitch, # 36293, there is no mount hole for a hitch ball. You will need to get a ball mount that will go into the hitch receiver and give you the location where the hitch ball will be mounted. This hitch is for a 2000 to 2004 Toyota Avalon. For the Toyota Avalon you will need the recommended ball mount for that hitch, which is the Draw-Tite Ball Mount, # 36051. It will come with the pin and clip. The hitch ball you will need is the Tow Ready 2 Inch Hitch Ball,...
    view full answer...

  • Will Draw-Tite Class II 1-1/4 Inch Hitch # 36246 Fit 2000 Ford Explorer With a Full Size Spare Tire
  • The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36246, will fit your 2000 Ford Explorer 4WD with the factory OEM full size spare tire. When installing the hitch the spare tire is loosened to allow the hitch to line up with the holes on the frame and it is re-tightened after the hitch is installed. If your vehicle is equipped with tow hooks, they will need to be removed. I am including a link to the installation instructions on the Draw-Tite hitch. If you plan on doing some towing...
    view full answer...

  • What is Correct Ball Mount for Draw-Tite 1-1/4-Inch Class II Hitch # 36445 for 1994 Volvo 940 Wagon
  • Thank you for providing your two photos showing the Draw-Tite hitch # 36445 that you have acquired for use on your 1994 Volvo 940 Series wagon. I was able to confirm with my technical contact at Draw-Tite that this hitch (which incidentally is no longer manufactured) is a correct fit for your vehicle and is a Class II-rated hitch with a tongue weight capacity of 300-lbs and a gross towing weight capacity of 3500-lbs. (Tongue weight is a measure of the downward force on the hitch applied...
    view full answer...

  • Trailer Wiring Harness for 2002 Toyota Highlander
  • The Plug-N-Tow wiring harness you mentioned, part # 33425 is indeed the correct harness for your 2002 Highlander. The harness is pretty easy to install, using existing connectors located behind the tail light assemblies with an additional wire that is ran to the positive battery terminal. Assuming that you already have a drawbar like part # 2923 for a 2 inch receiver or # 36051 for a 1-1/4 inch receiver and the appropriate trailer ball for your trailer, you are good to go.
    view full answer...

  • Trailer Hitch, Ball Mount, Hitch Balls, and Trailer Wiring for a 2010 Volkswagen Tiguan
  • Yes. I am happy to say that the Draw-Tite Trailer Hitch, # 36474, will fit your 2010 V-dub Tiguan. I have included a link to the installation instructions below. The recommended ball mount is # 36051 for use with hitch balls # 19256, or # 19258. To wire your Tiguan with a 4 flat trailer connector you will need the Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, # 119190KIT. This is kit comes with everything needed for installation including a circuit tester...
    view full answer...


Do you have a question about this Ball Mount?


Used Items Available

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $13.95

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Brian T
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.