1. Ball Mounts
  2. Draw-Tite
  3. Fixed Ball Mount
  4. Fits 1-1/4 Inch Hitch
  5. Class I
  6. 2000 lbs GTW
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

Item # 3591
lowest price pledge
Our Price: $15.28
You Save: 60%
Ball Mounts
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
In Stock, Ships Today
Draw-Tite Drop - None,Rise - 1 Inch Ball Mounts - 3591
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection. Call 800-298-8924 to order Draw-Tite ball mounts part number 3591 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs. Ball Mounts reviews from real customers.
  • All Info
  • Reviews (11)
  • Q & A (13)
  • Videos (1)
  • Photos
  • Why etrailer?

Draw-Tite Ball Mounts - 3591

  • Fixed Ball Mount
  • Fits 1-1/4 Inch Hitch
  • Class I
  • 2000 lbs GTW
  • Drop - None
  • Rise - 1 Inch
  • Draw-Tite
  • No Ball
  • Steel Shank

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I and Class II compatible
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty

3591 Draw-Tite Ball Mount for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

Replaces 6802

California residents: click here

Video of Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Draw-Tite Ball Mounts - Fixed Ball Mount - 3591 Review

Today we'll be reviewing part number 3591. This is the Draw-Tite Sportframe Draw Bar with the five eighth inch rise. Rated at two thousand pounds. This ball mount is going to fit your inch and a quarter by inch and a quarter class one Sportframe receiver style hitch. It's going to use a ball with a three quarter inch shank diameter. We can find that out simply by taking a measurement of our ball hole diameter, which for this mount is going to measure three quarters of an inch.

If we take a measurement from the center of the hitch pinhole to the center of the ball hole it's going to give us a measurement of nine and three quarters of an inch. This system does come with the half inch pin and clip so that way once you get this inside the hitch you have everything you need in regards to securing it to your vehicle. To find out the rise we simply just measure from the top of the shank to the top of the ball mount. That's going to give us a measurement of five eighths. This is rated for up to two thousand pounds and up to two hundred pounds of tongue weight. The distance that we have from the center of the hitch pinhole to the upright portion here is going to give us a measurement of seven inches, and then from the center of the hitch pinhole to the back of the shank is going to give us a measurement of an inch and a half.

This is a solid piece so it's not hollow. We have a solid piece here on the bottom. The way this works is you would take this portion here, slide it into your hitch, line up the pinholes, and then you can take your half inch pin and clip, slide it into place, and secure it with the pin on the other side. Now you're ready to attach a hitch ball and load up any accessories that you need to get. That's going to do it for today's review of part number 3591.

This is the Draw-Tite Sportframe Draw Bar with a five eighth inch rise rated at two thousand pounds. .

Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 9-3/4" Long - 2,000 lbs - 3591

Average Customer Rating:  5.0 out of 5 stars   (11 Customer Reviews)

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.

- 3591

Received my ordered extended drawbar a day early. Super solid metal. No hollow tubing. I am very confident that there will be no problems towing my trailer. Thanks guys for the review video. It was helpful in making this choice. 664451

- 3591

Nice mount! Very heavy duty! Fast sh ipping. 478608

- 3591

bought a hitch bar for my sidebyside, going to hang a flag on it,.. this one reasonable priced and complete, worked well, shipped as advertised.. recommend... 390184

still holds the flag pole...
thunder t - 06/07/2018


- 3591

I'm giving this company an excellent review. We received our product and one part of it was 1/8 of an inch from fitting properly. I called customer service and the lady I spoke with was very helpful. They went through all the hitches like this that they had and figured out the problem. She sent me a new one free and it worked great! Thanks for the awesome service! 390037

- 3591

Needed a spare to put a 2" ball on. Excellent condition looks rugged enuogh to handle all my towing needs 204360

- 3591

Excellent shipping, perfectly matched my vehicle, and will recommend to others! 182694

- 3591

Place my order and it was delivered on time. Prices are great 175035

- 3591

This drawbar leveled my trailer perfectly and was able to adjust the tounge weight easily. Great service and delivered when promised for my vacation. 56920

- 3591

Stout. 49362

- 3591

Nice drawbar! 34276

- 3591

'Just arrived today. So great turnaround on the delivery. Obviously haven't had a chance to use it yet, but I have one similar to it already, so anticipate satisfactory use. Thanks. 30041


Ask the Experts about this Draw-Tite Ball Mounts

  • Are All Ball Mounts Reversible?
    Not all ball mounts are reversible (meaning they have a rise and drop), but most do. Some Class I ball mounts, like part # 3591, are to be used solely in the rise position.
    view full answer...
  • Receiver Hitch, Wiring and Other Necessary Towing Accessories for 2007 Dodge Caliber
    In order to tow a trailer, you will need a hitch, a draw bar and pin and clip, a trailer ball and a vehicle wiring harness. I would recommend the Draw-Tite Class I receiver, part # 24769. This receiver fits all Caliber Models EXCEPT for the R/T model. This hitch includes the pin and clip. If you have the R/T model, Curt Manufacturing offers a Class I receiver, part # C11006 that will fit all models except for the SRT-4. The draw bar and pin and clip are also included. The trailer...
    view full answer...
  • Drawbar for 2018 Subaru Forester With Factory Hitch
    The 2018 Subaru Forester OEM hitch is Class I, so you would only need a Class I compatible drawbar. I recommend the Draw-Tite # 3591, which has no drop and just a 5/8" rise. This drawbar comes with a pin and clip so the only thing you'd need is a compatible hitch ball. For a 2" ball you would want # 19258, and for a 1-7/8" hitch ball you would want # 19256. I have added a link to a video review of this drawbar for you to take a look at.
    view full answer...
  • Recommended Trailer Hitch Receiver and Wiring for 2008 Dodge Caliber
    The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24769 is the trailer hitch receiver I recommend for your 2008 Dodge Caliber. I've attached a video of this simple bolt on installation for you. All the installation hardware is included with the hitch. For your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118552 which will connect behind your tail lights and give you a 4-way trailer connector. Once you've...
    view full answer...
  • Hitch Recommendation for a 2007 Dodge Caliber Towing a Jet Ski Trailer
    It's very possible that you could tow a Jet Ski with your 2007 Dodge Caliber but you will need to check a few things first. You will need to know what the owners manual of the Caliber says is the towing capacity for the vehicle and you will need to know the weight of the trailer with the Jet Ski loaded on it. If the Jet Ski weighs less than the weight capacity for the vehicle you would be OK to tow with it. Now for a hitch you would want the Draw Tite hitch part # 24769. I attached an...
    view full answer...
  • What Ball Mount For Draw-Tite Class I Trailer Hitch Receiver, # 24769, on 2007 Dodge Caliber
    All Class I, 1-1/4 inch trailer hitches will require a special ball mount, and are designed for Class I accessories. The Class I 1-1/4 inch hitches will not accept any Class II 1-1/4 inch accessories. The Draw-Tite Sportframe Drawbar 5/8 inch Rise 2000# Kit, # 3591, is designed to be used in the Draw-Tite Class I Trailer Hitch Receiver, # 24769, on your 2007 Dodge Caliber. If a different ball mount is needed for towing a trailer then that means your vehicle most likely should not be...
    view full answer...
  • Which Ball Mount Should be Used on a Hitch for a 2009 Dodge Caliber
    With the Draw-Tite hitch, part # 24769, for your 2009 Dodge Caliber you should use part # 3591. I have added a link to the instructions for the hitch so that you can see the hitch profile and how the draw bar is positioned. Draw bar part # 36061 is for a Class II hitch and the hitches available for your Caliber are Class I, except for the Valley, so that ball mount would not fit in the hitch. I have included a link to all the ball mounts we carry for Class I hitches. You want the...
    view full answer...
  • Will the Draw-Tite Sportframe Trailer Hitch, # 24785, Fit a 2007 Mazda 6 Hatchback And Wagon
    The Draw-Tite Sportframe Trailer Hitch, item # 24785, will fit the 2007 Mazda 6 Sport Wagon models only. For the 2007 Mazda 6 five door hatch back, and the 4 door sedan, you would need to use the Draw-Tite Sportframe Trailer Hitch, item # 24775. Some items you may need to complete your Class I towing setup are listed below. Wiring, item # 119176KIT, for the 2007 Mazda 6 Sport Wagon Wiring, item # 118405, for the Mazda 6 4 Door Sedan and 5 Door Hatchback Drawbar, item # 3593,...
    view full answer...
  • Towing Setup Recommendations for a 2007 Dodge Caliber SXT
    This Draw-Tite Trailer Hitch, part # 24769, has towing capacities of 2000 lbs total trailer weight and 200 lbs tongue weight. If your boat and trailer weighs less than that this hitch would be adequate for you. You should also consult the owners manual of your 2007 Dodge Caliber SXT for the towing capacity of your vehicle. You should always go with the lowest towing capacity of all the components of your towing setup when determining your overall towing capacity. If you determine...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2003 Mitsubishi Outlander
    First thing you'll need for your 2003 Mitsubishi Outlander is a trailer hitch like the Curt hitch part # C12293 which is a confirmed fit and will work well. Next you'll need trailer wiring. Which for that you'd want the # 118306 which is a confirmed fit too. For a ball mount you'd then want the part # 3591 and for hitch balls part # 19258 for a 2 inch ball and part # 19256 for a 1-7/8 inch ball.
    view full answer...
  • Is a Ball Mount Required to Tow Trailer with 2007 Dodge Caliber
    Draw Bars are needed for towing. Another name for them, that to me makes more sense, is "ball mount" Basically this is the piece of metal that inserts into the hitch opening that holds the hitch ball for your trailer to connect to. If you want to tow with your 2007 Dodge Caliber you will need a ball mount. First you need a hitch installed though. For that the Draw Tite part # 24769 is the correct fit. And then for a ball mount/draw bar you'd want the part # 3591 which is what Draw Tite...
    view full answer...
  • Trailer Hitch and Bike Carrier for a 2010 Dodge Caliber Mainstreet
    Starting with the trailer hitch, the Draw-Tite hitch # 24769 that you have selected is a correct fit for your 2010 Dodge Caliber Mainstreet. And the Swagman bike carrier # S64670, will fit the hitch and your Caliber as well. I have linked a video showing this bike rack on a 2011 Caliber. If all you want to do with the hitch is use it for a bike rack then you will not need a ball mount at all. If you do plan on towing a trailer then you would need ball mount # 3591, a 1-7/8 inch ball...
    view full answer...
  • Ball Mount and Ball Recommendations for Draw-Tite Class I Trailer Hitch on a 2011 Dodge Caliber
    I checked to see which hitch you ordered for your 2011 Dodge Caliber and it was Draw-Tite hitch # 24769. For Class I trailer hitches like this you are supposed to use the ball mount recommended by the hitch manufacturer. In this case it is # 3591 and the hitch instructions indicate it should be used in the rise position only (with the ball platform on top). A hitch pin with clip is included. If the trailer you will be towing takes a 1-7/8 inch ball you can use ball # 19256. And if it...
    view full answer...

Do you have a question about this Ball Mount?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality ball mounts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924